Survey and demarcation and Construction Of Forest Boundary Demarcation Pillars in Notified Area Belagavi division Kankumbi range Chorla Sy.No. 38,34A, 16,9,45,Total 12.00 km 146 Demarcation PiIlars

Survey and demarcation and Construction Of Forest Boundary Demarcation Pillars in Notified Area Belagavi division Kankumbi range Chwla Sy.No. 38,34A, 16,9,45,Total 12.00 km 146 Demarcation PiIlars

Survey and demarcation of Forest/block/ compartment boundary including clearing of jungle growth to a width 2 meter by engaging a gang of following persons- Head Mazdoor,Chain men,Algnment coolies,Pe...

Engaging qualified Surveyor @ one manday for 0.80 km of work.

Engaging qualified Draughtsman @ one manday for 0.80 km of work.

Fixing the reference point/bench mark on the ground with reference to the map and surveying the tie lines for measuring the accuracy of the survey work done. @ 10% of the rate provided for item (a) (i...

Construction of labour shed using locally available forest material-10 unskilled heavy Mazdoors .

Setting up and winding up of officers/ staff tents of 12'x10' dimension along with its furnitures.

Transportation of camp articles and survey equipments from camp to camp

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works,as per drawing and technical specifications, incl...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth. Compacting each deposited layer by ramming after watering with a lead upto 50m, and lift upto 1.5m...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) on concrete surface/cellings including rounding off corners wherever required smooth rendering. Providing and removing sc...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Lettering with black/red Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign ...