Widening and Strengthening of Mahadewa Dudhara Sopra Road (ODR) in Distt Gorakhpur KM 1.00 To 16(200) (LOT NO. 1 / 1)

Amount

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per MORT&H Spe. 201 Sr. no 2.03 complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m As per MoRT&H Specification Ref. No. 301 & Sr No. 3.06 complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Removal of unserviceable soil including excavation, loading and disposal upto 5000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads upto 10 Km, transporting to site, spreading, grading to required slope and compacting to meet 95% proctor density requirement of table No. 300-2 MORTH specification no. 305 complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads,up to 10 km, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 as pr MoRTH 3.18- 305 complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Speicification Clause 401 MoRTH SR No 4.01 & Spec. 401 (b) complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. as pr MoRTH Specification 4.1-406 complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Prime Coat Providing and applying primer coat with bitumen emulsion SS on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. as per MoRTH SR No. 5.1 & Specification 502 complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Providing and laying dense graded bituminous macadam Grading-I with 120 TPH batch type HMP producing an avarage output of 100-120 tonne per hour using crused aggregates of specified grading premixed with bituminous binder VG-30 @ 4.0 percent by weight of total mix and filler , transporting the hot mix to work site , layig with hydostatic paver finisher with sensor control to the required grade , level and aligmnment , rolling with smooth wheeled , vibratory and tendom roller to achieve the desired compaction as per MoRT&H Specification Clause 505 5.04 complete in all respects complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Tack Coat on Bituminous surfaces Providing and applying tack coat with bitumen VG 10 using Bitumen pressure distributer at the rate of 0.20 kg per sqm on prepared bituminous surface cleaned with mechanical brooom. As per MoRTH SR No. 5.02 & Spec. 503 complete in all respect as per directions of Engineer in charge (including Labour Cess & GST will be paid extra as applicable)

Providing and laying bituminous concrete grade -II with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 Sr no 5.05 complete in all respects complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Construction of U type Drain 300mm x 450mm drain

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. As per Sr. No. 12.1 MoRT&H specification 304 complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

Plain cement concrete M15 in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundationand compacted by vibration including curing for 14 days foundation. As per Sl No 2.08 MoRTH Sep. 1500, 1700 & 2100 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & GST will paid extra as applicable)

RCC M-20 Furnishing and Placing Reinforced cement concrete in super-structure as per drawing and Technical Specification. As per MoRT&H Spec. Sr. No. 14.1 clause 1500. 1600 & 1700 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & GST will paid extra as applicable)

Supplying, fitting and placing HYSD bar reinforcement in super structure complete as per drawing and technical specifications As per Sl No 13.06 MoRTH Sep. 1600 & 2200 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & GST will paid extra as applicable)

Construction/Extention of R.C.C. Culverts

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. As per Sr. No. 12.1 MoRT&H specification 304 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & GST will paid extra as applicable)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. As per MORT&H Specification no 12.04 Clause 2100 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & GST will paid extra as applicable)

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications.As per MORT&H Specification no 12.05 Clause 1300 complete in all respect as per directions of Engineer in charge.(Including Labour Cess & GST will paid extra as applicable)

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications As per MoRT&H Specification Ref. No. 1300& 2200 & Sr No. 13.01 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & GST will paid extra as applicable)

Furnishing and Placing Reinforced cement concrete in super-structure as per drawing and Technical Specification. As per MoRT&H Spec. Sr. No. 14.1 clause 1500. 1600 & 1700 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & GST will paid extra as applicable)

Supplying, fitting and placing Mild steel reinforcement complete in sub-structure as per drawing and Technical Specification 13.07 clause 1600 &2200 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & GST will paid extra as applicable)

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications. As per MoRT&H Spec. Sr. No. 13.2 clause 1300 & 2200 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & GST will paid extra as applicable)

O.B.B. Filter material behind abutment & Wing wall as per SI No. 2A complete in all respect as per directions of Engineer in charge (Including Labour Cess & GST will paid extra as applicable)

MAA Aadi Shakti Infrabuild India Pvt. Ltd.

A K ENGINEERING WORKS

M/S R.K.TRADERS