Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC 4 KHEME KA KUA PAL ROAD JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹32.4 L+₹86,005 (2.73%)Rejected-Finance JAISALMER | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹32.4 L+₹89,540 (2.84%)Rejected-Finance 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹33.6 L+₹2.1 L (6.57%)Rejected-Finance JAISALMER | JAISALMER | RAJASTHAN | 342310 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹33.8 L+₹2.3 L (7.25%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
6 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
CERTAIN REPAIR TO BR WORKS IN CERTAIN UNITS OF ZONE-I AT MIL STN JAISALMER
2023_MES_574164_1
8250/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹74,000
Yes
13 Mar 2023
10 Jan 2023
8 Feb 2023
10 Jan 2023
6 Feb 2023
23 Jan 2023
Amount
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.
M&L rendering 15 mm thk on brick or concrete surface in CM 1:6 and surface finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.
M&L for 10mm thick rendering in cement morter 1:4 on fair face of brick wall or concrete surfaces, finished even & fair complete all as specified & directed by Engineer-in-charge.
M&L for rendering 5 mm thick on fair faces faces of brick work or concrete surfaces of ceilings in cement plaster 1:3 & finished the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified & directed by Engineer-in-charge.
M&L preparation of new plastered surfaces of any description and applying two coats of oil emulsion distemper over a coat of wall putty on wall and chalk whiting prepara-tory to distempering complete all as specified & directed by Engineer-in-charge.
M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling complete all as specified & directed by Engineer-in-charge.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) complete all as specified and directed by Engineer-in-charge.
M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in subbase of floors complete all as specified & directed by Engineer-in-charge.
M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including screed bed or bedding layer 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.
M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular polished, area of each tiles not exceeding 0.36 Sqm (including 600mmx600mm size), in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and laid over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed by Engineer-in-charge.
M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of 10mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.
S&F glazed ceramic coloured tiles of size 450mmx300mmx 7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick rendering in CM 1:4 as backing coat etc complete all as specified and directed by Engineer-in-charge.
Taking down shutters of any description area not exceeding 1.00 Sqm each complete all as specified & directed by Engineer-in-charge.
Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified & directed by Engineer-in-charge.
Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) or CM 1:3 and to match with existing specifications complete all as specified and directed by Engineer-in-charge.
Taking down chowkats or frames (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including making good the disturbed surface in PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) or CM 1:3 and to match with existing specifications complete all as specified and directed by Engineer-in-charge.
S & F 35mm thk Factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-charge.
S&F 35 mm thick Glazed and skeleton shutters second class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-charge.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and directed by Engineer-in-charge.
S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-charge.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed by Engineer-in-charge.
S&F 125 mm size aluminium handle, cast type, anodiesed complete all as specified & directed by Engineer-in-charge.
S&F, 300mm long mild steel sliding door bolts plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified & directed by Engineer-in-charge.
S & F steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay ,complete with glazing bars ,devetailed or welded complete all as specified & directed by Engineer-in-charge.
S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge.
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge.
S&F Galvanized mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples fixed complete all as specified & directed by Engineer-in-charge.
M&L for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-charge.
M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-charge.
S & F Sheet glass, 4.80 mm ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-in-charge.
S&F aluminium die cast body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer-in-charge.
S&F 18/19mm thick pre-laminated particle board, exterior grade, with decorative choice lamination & other side balancing white lamination with and including 6mm thick teak with wood beading fixed in kitchen CB or pelmet including dismantling existing board of any description with scews complete all as specified and directed by Engineer-in-charge.
M&L for 2nd class hard wood fillets square, rectangular as in lippings fixed with nails of area exc 3 Sqcm but n.exc 6 sqcm complete all as specified & directed by Engineer-in-charge.
S & F 40mm width of flaps (when open) continuous (piano) hinges, mild steel bright finish or electroganised fixed to wooden or angle iron frame complete all as specified & directed by Engineer-in-charge.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified & directed by Engineer-in-charge.
S&F in repair 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate with screws complete all as specified & directed by Engineer-in-charge.
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified & directed by Engineer-in-charge.
S&F 500 litres capacity Three Layers White colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old existing PVC tank complete all as specified and directed by Engineer-in-charge.
S&F 1000 litres capacity Three Layers White colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old existing PVC tank complete all as specified and directed by Engineer-in-charge.
S&F in repair 15mm dia bib taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair 15mm dia pillar taps cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge.
S&F in repair stop valve 20 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge.
S&F in repair vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (Excluding flushing cistern and flush pipe) and making good to the floor complete all as specified & directed by Engineer-in-charge.
S&F in repair vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass, chromium plated, coupling, waste pipe, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts complete complete all as specified & directed by Engineer-in-charge.
S & F in repair 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified & directed by Engineer-in-charge.
S&F in repair PVC connections 450mm long, 15mm size with PTMT nuts for WHB, flushing cistern, geysers etc complete all as specified & directed by Engineer-in-charge.
S&F in repair CP grating(with & without hole) for Nahani trap and floor trap of size 100 mm dia fixed complete all as specified & directed by Engineer-in-charge.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exceeding 10cm but not exceeding 20cm girth in stone, concrete block or slab walls.complete all as specified & directed by Engineer-in-charge.
S&F in repair Swivel shower rose with arm 195mm long with bend of 45 degree with flange of PTMT any colour fixed complete all as specified & directed by Engineer-in-charge.
S & F in repair 15mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm- 210 gms/ 25mm-455gms/40mm - 690 gms), complete all as specified and directed by Engineer-in-charge.
S & F in repair 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm- 210 gms/ 25mm-455gms/40mm - 690 gms), complete all as specified and directed by Engineer-in-charge.
S & F in repair Vitreous china wash down water closet pan(Pedestal pattern), white (EWC)with necessary P/S Trap and fixed in repairs including jet spray and seat cover complete all as specified and directed by Engineer-in-charge.
S&F, in repair, tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.
S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified & directed by Engineer-in-charge.
S&F in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified & directed by Engineer-in-charge.
S&F in repair PVC acrylic shelf for WHB 450 mm long complete all as specified & directed by Engineer-in-charge.
S&F in repair PVC seat cover black/white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified & directed by Engineer-in-charge.
S&F in repair bathroom mirror cabinet, approximate size 500x400mm.complete all as specified & directed by Engineer-in-charge.
S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm dia bore complete all as specified & directed by Engineer-in-charge. (Make :- Prayag Cat No. 9575 or equivalent in Appx 'C'list of makes).
S&F in repair two way angle valve for fixing in 15mm dia bore complete all as specified & directed by Engineer-in-charge.
S&F in repair Health Faucet for EWC complete all as specified & directed by Engineer-in-charge. (Make :- Prayag Cat No. BEA-41 or equivalent in Appx 'C'list of makes).
Taking up or down steel tubing and connections of following size all as directed by Engg-in- Charge :-
(a) 15 mm bore
(b) 20 mm bore
S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors of following sized :-
(a) 15 mm bore
(b) 20 mm bore
Refixing old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of the following size :-
(a) 15 mm bore
(b) 20 mm bore
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engineer-in-charge.
Hacking out old broken glass of any thickness size,quality or description from any type of frames and S&F 3mm thick sheet glazing in square n.exc 0.5 sqm ordinary quality with glazing clips and oil putty complete all as specified & directed by Engineer-in-charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. loaded bedded and pointed in any mortar complete all as specified & directed by Engineer-in-charge.
M&L Granite (of any type) tile 16 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid on complete all as specified & directed by Engineer-in-charge.
M&L Granite (of any type) tile 16 to 20mm thick machine cut,in skirting/dado laid over cement screed bed and jointed with cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed by Engineer-in-charge.
Demolition of Brickwork or stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone complete all as specified & directed by Engineer-in-charge. Note :- Serviceable stone obtained from demolition shall be used.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified & directed by Engineer-in-charge.
Taking out Raking out joints/ pointing in CM to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified & directed by Engineer-in-charge.
M&L for keyed pointing in cement mortar (1:4) to squared rubble masonry, Jodhpur type, coursed or un coursed all as specified & directed by Engineer-in-charge.
Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thick (below or above ground level) & removing rubbish out side MD land complete all as specified & directed by Engineer-in-charge.
M&L for 75 mm thick Cement concrete 1:2:4 Type B1 using 40mm graded stone aggregate as in flooring or mass concrete complete all as specified and as directed by the Engineer in Charge.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.
Dismantling/Demolition of existing roof terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified and as directed by the Engineer in Charge. Note : Demolition should be done by chiselling.
M&L for PCC (1:2:4) B-0 (using 12.5 mm graded stone aggregate) as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc., with approved water proofing compound all as per manufacturer's instructuions on the roof surface to achieve requisite slope all as specified and directed. (Note :- Supply only water proofing compound shall be measured & paid separately).
Supply only Liquid water proofing compound complete all as specified and as directed by the Engineer in Charge.
M&L for providing 3 mm thick APP modified memberane over RCC roof with the following specifiations :-
(a) Cleaning existing surface properly. (b) Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density of 0.87 -0.89 Kg/Lit at 25 Degree Centigrade on the prepared dry roof surface. (c) Providing and Laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :- (i) Membrane weight >3.6 Kg/Sqm. (ii) Net wooven polyster weight >160 gm/Sqm (iii) Softening point of membrane > 150o C (iv) Joint Tensile strength Longitudiual > 650 Sq Cm at 230o C & Transverse > 450/ Sq cm (v) Tear strength - Longitudual > 300 N & Transverse > 250 N Direction (vi) Elongation > 30 % (vii) Impermeability under water pressure > 3 Kg/Sq cm Note:- APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane. (d) Over the membrance provide a finishing with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.
M/s Shri Inder Construction Company
MARUDHARA CONSTRUCTION COMPANY
M/S MAYA CONSTRUCTION COMPANY
M/S RAJASTHAN LABOUR SERVICE
M/S BHATI TRADERS
BHAGWATI CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .