REPAIR/MAINT OF INTERNAL ELECTRIFICATION, FITTING AND FIXTURE AND ALL CONNECTED ITEMS IN OFFRS, JCOs/OR MD ACCN AT CANTT AREA UNDER GE (I) KANPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed.

M&L for point wiring for one light point/fan/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated sheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade of size 25mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 2 above but in existing conduit complete all as specified and directed.

All as per item No 2 above but upto ceiling height and on surface of ceiling complete all as specified and directed.

All as per item No 2 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and incl conduit complete all as specified and directed.

All as per item No 2 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in existing conduit complete all as specified and directed.

All as per item No 2 above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed.

All as per item No 2 above but for one 3 pin 5A socket outlet independent controlled by one switch in existing conduit complete all as specified and directed.

All as per item No 2 above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.

All as per item No 2 above but for one 5A socket outlet on the same board controlled by one switch in existing conduit complete all as specified and directed.

All as per item No 2 above but for one light point controlled by 2 nos two way switches complete all as specified and directed.

All as per item No 2 above but for one light point controlled by 2 nos two way switches in existing conduit complete all as specified and directed.

All as per item No 2 above but for one light/fan/bell point including pressed steel terminal modular boxes and top cover (modular plate) of suitable size with all accessories complete all as specified and directed.

All as per item No 2 above but for one socket outlet 5 amps on independent board including pressed steel terminal modular boxes and top cover (modular plate) of suitable size with all accessories complete all as specified and directed.

All as per item No 2 above but for one socket outlet 5 amps on same board including pressed steel terminal modular boxes and top cover (modular plate) of suitable size with all accessories complete all as specified and directed.

All as per item No 2 above but for one light point controlled by two, two way switches including pressed steel terminal modular boxes and top cover (modular plate) of suitable size with all accessories complete all as specified and directed.

All as per item No 2 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including pressed steel terminal modular boxes and top cover (modular plate) of suitable size with all accessories complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 2.5 Sqmm as earth lead in & including concealed PVC conduit medium grade of size 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

All as per item No 18 above but in existing concealed conduit complete all as specified and directed.

All as per item No 18 above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit complete all as specified and directed.

All as per item No 18 above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm in existing concealed conduit with earth wire 4 sqmm complete all as specified and directed.

All as per item No 18 above but for cable of size 10 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm in & including concealed PVC conduit complete all as specified and directed.

M&L for switch piano flush button single pole one way 5/6 amps 240 volts complete all as specified and directed.

S&F switch piano flush button single pole one way 15/16 amps 230 Volts complete all as specified and directed.

M&L for switch piano flush button single pole two way 5 amps 240 volts complete all as specified and directed.

M&L for bell push flush button single pole one way 5 amps 240 volts complete all as specified and directed.

M&L for socket 3 pin 5 Amp flush type, 230 volts complete all as specified and directed.

M&L for socket out let, 3 pin 15 amps flush type, 230 volts complete all as specified and directed.

S&F modular socket outlet 6 amp 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket outlet 16 amp 2/3 pin combined 2 module complete all as specified and directed.

M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed.

M&L switch modular type one way 1 module 16 amps 230 Volts complete all as specified and directed.

M&L for switch modular type single pole two way 1 module 6 amps 240 volts complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed.

S&F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed.

M&L for bell electric heavy duty Ding Dong type 230 volts single pole complete all as specified and directed.

Supply and fixing in replacement electronic, step type hum free fan regulator suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

M&L for bell push modular type 1 module one way 6 amps 240 volts complete all as specified and directed.

S&F of LED Aluminium batten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.95 ,THD<20% ,Surge protection 3 KV in CM, IP-20n Protected, meets LED IS Specifications , Class-1, short circuit and over circuit protection voltage range-150 to 270 AC, system efficiency at luminaire level > 100lumen/watt and including connecting up with pvc sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, in extruded aluminium housing 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of size 0.75 sqmm complete all as specified & directed.

S&F LED in repair wall security light 20/25 W pressure die cast aluminium IP-66 road way luminaries with high power LED as light source having efficacy 120 lm/W complete all as specified and directed.

S&F PDC Housing LED Bulkhead 10 watt luminaire with oval diffuser, equipped with 2kV in- built surge protection with IP 65 protection rating complete all as specified & directed.

Supply & Fix LED lamp 12 watt having lumen 1200 power factor>.9 colour temperature 6500K CRI>80 protection class IP 20 suitabale for batten holder complete all as specified and directed.

Supply & Fix LED lamp 9 watt having lumen 900 power factor>.9 colour temperature 6500K CRI>80 protection class IP 20 suitabale for batten holder all as spfd and directed.

S&F in replacement of LED Post Top Lantern 40 watt made in die cast aluminium housing with decorative clear oval acrylic diffuser and IP-65 protection CCT 5700K fixing with proper arrangements and making electrical connection complete all as specified and directed.

S&F in replacement of LED Post Top globe master made up of unbreakable polycarbonate suitable for mounting on gate with LED bulb 25 W with proper arrangements and making electrical connection complete all as specified and directed.

S&F in replacement LED Bollard Light 8 watt new generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source complete all as specified & directed.

M&L for sheet metal enclosure MCB single pole and neutral with a two pin and earth plug and socket 25 amps 240 volts with one single pole MCB of 20 amps complete all as specified and directed.

S&F in replacement of Modular AC Box with 20 A SP MCB Plastic enclosure & unbreakable heavy duty with ISI Plugtop complete all as specified & directed.

S&F distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, with appropriate size copper bus bar and neutral link, including one MCCB 4 pole 415 Volts 125Amps rating with rapturing capacity 16 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed.

Supply and fix sheet metal enclosure MCB distribution board, 4 way double door with IP-43 protection with 200 Amp rated bus bar complete all as specified & directed.

All as per item No 51 above but for 8 way complete all as specified and directed.

S&F 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) of SP 5 to 32 Amps and Current carrying capacity in the MCB DB with connection testing and commissioning complete all as specified and directed.

All as per item No 53 above but SPN 40 to 63 Amp complete all as specified and directed.

Supply and laying to wall or poles or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium multistranded conductor 10 sqmm nominal cross section twin core for service connections complete all as specified and directed.

All as per item No 55 above but cable of size 6 Sqmm 2 core complete all as specified and directed.

Supply & fix electronic meters temper proof LCD Display with poly carbonate cover 230 Volt 10-60 Amp accuracy class-I 50 Hz conforming to IS-13779 IP-54 with parameters to show data, time ,current reading, load, PF, voltage and KWH Complete all as specified & directed.

All as per item No 57 above but 3 phase 415 volt complete all as specified and directed.

S&F in repair MCCB 4 Pole, 415V, with adjustable type 160 Amps with breaking capacity 36 KA complete all as specified & directed.

S&F in repair MCCB 4 Pole, 415V, with adjustable type 250 Amps with breaking capacity 25 KA complete all as specified & directed.

Supply and laying in trenches or fixing to wall/pole or passing through pipe in replacement of XLPE insulated heavy duty armoured electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 4 core complete all as specified and directed. (Note : Including making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

All as per item No 61 above but cable of size16 Sqmm 4 core complete all as specified and directed.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out for laying of cables,foundation filling of poles or stays and for rerouting of cables complete all as specified and directed.

Returning filling, including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable complete all as specified and directed. Note:- Punned thickness shall be measured and paid.

M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.

M&L for Earthing galvanised iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil and removal of surplus excavated material from site as specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion complete all as specified and directed.

S&F Modular MCB SP 20 Amp complete all as specified and directed.

A.B.Enterprises (BID ID -3160510)

U.R ASSOCIATES (BID ID -3170501)

SUSHMANAND ENGINEERING WORKS (BID ID -3165733)

M/S DARSHAN ENGINEERING WORKS (BID ID -3170080)