ORTHO2025

DHRMG CORTICAL SCREWS 2.7MM-34 MM.,

DHRMG CORTICAL SCREWS 2.7MM-44 MM,

DHRMG CORTICAL SCREWS 2.7MM-42 MM.

DHRMG CORTICAL SCREWS 2.7MM-40 MM

DHRMG CORTICAL SCREWS 2.7MM-38 MM.

DHRMG CORTICAL SCREWS 2.7MM-36 MM,

CONNECTING RODS - 11.0MM X 40CM

CONNECTING RODS - 11.0MM X 30CM

CONNECTING RODS - 11.0MM X 20CM

COBRA PLATE 8 TO 11 HOLED.1 UNIT CONSISTS OF 1 PLATE AND 3.5MM SCREWS FOR ALL THE AVAILABLE HOLES.(QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS)

CLAVICULAR HOOK LOCK PLATE 4 TO 8 HOLES (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. 1 UNIT CONSISTS OF I) PLATE - 1. PLATE SHOULD FIT ANATOMICALLY, II)CORRESPONDING LOCKING SCREWS -NUMBER OF SCREWS CORRESPONDING TO NUMBER OF HOLES IN PLATE. THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES(QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS). PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT. (THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS)

ARTICULATED EXTERNAL FIXATOR FOR WRIST

AO CLAMPS - T-T CLAMPS 11 X 11MM

AO CLAMPS - SWIVEL CLAMPS 4.5 X 11 MM

AO CLAMPS - SWIVEL CLAMPS 4 MM X 4 MM

AO CLAMPS - SWIVEL CLAMPS 3.5 MM X 4 MM

AO CLAMPS - SWIVEL CLAMPS 2.5 MM X 4 MM

AO CLAMPS - DOUBLE PIN CLAMPS

AO BALL TYPE CLAMP

ANTIBIOTIC BONE CEMENT 40G LOW VISCOSITY, FOR USE IN CEMENT GUN

ANTIBIOTIC BONE CEMENT 40 GM HIGH VISCOSITY

CONNECTING RODS - 11.0MM X 50CM

K NAILS FOR FEMUR- 8 X 42 MM

K NAILS FOR FEMUR- 8 X 40 MM

K NAILS FOR FEMUR- 8 X 38 MM

K NAILS FOR FEMUR- 11X 44 MM

K NAILS FOR FEMUR- 11 X 42 MM

K NAILS FOR FEMUR- 11 X 40 MM

K NAILS FOR FEMUR- 11 X 38 MM

K NAILS FOR FEMUR- 10 X 44 MM

K NAILS FOR FEMUR- 10 X 42MM

K NAILS FOR FEMUR- 10 X 40 MM

K NAILS FOR FEMUR- 10 X 38 MM

DRILL BITS - 4.5MM X 300MM SOLID

DRILL BITS - 4.5MM X 300MM CANNULATED

DRILL BITS - 4.5MM X 150MM CANNULATED

DRILL BITS - 4.0MM X 400MM SOLID

DRILL BITS - 4.0MM X 300MM CANNULATED

DRILL BITS - 3.2MM X 400MM SOLID

DRILL BITS - 3.2MM X 300MM SOLID

DRILL BITS - 3.2MM X 300MM CANNULATED

DRILL BITS - 3.2MM X 150MM SOLID

DRILL BITS - 2.7MM X 150MM SOLID

DRILL BITS - 2.7MM X 150MM CANNULATED

DRILL BITS - 2.0MM X 150MM SOLID

DRILL BITS - 1.8MM X 150MM

SEMI TUBULAR (SMALL) - 8 HOLE

SEMI TUBULAR (SMALL) - 7 HOLE

SEMI TUBULAR (SMALL) - 6 HOLE

SEMI TUBULAR (SMALL) - 10 HOLE

PLATE 4.5MM BROAD LCP 6 TO 12 HOLES, 14 HOLE,16 HOLE 1 UNIT CONSISTS OF 1 PLATE AND LOCKING SCREWS FOR ALL THE AVAILABLE HOLES. THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES(QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS)

PLATE 4.5MM BROAD DCP 6 TO 12 HOLES, 14 HOLE,16 HOLE.1 UNIT CONSISTS OF 1 PLATE AND 4.5MM SCREWS FOR ALL THE AVAILABLE HOLES.(QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS)

PLATE 4.5 MM NARROW DCP 6 TO 12 HOLES, 14 HOLE,16 HOLE.1 UNIT CONSISTS OF 1 PLATE AND 4.5MM SCREWS FOR ALL THE AVAILABLE HOLES.(QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS)

PLATE 3.5MM RECONSTRUCTION PLATE 5 TO 12 HOLES.1 UNIT CONSISTS OF 1 PLATE AND 3.5MM SCREWS FOR ALL THE AVAILABLE HOLES.(QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS)

PLATE 3.5MM DCP 6 TO 12 HOLES.1 UNIT CONSISTS OF 1 PLATE AND 3.5MM SCREWS FOR ALL THE AVAILABLE HOLES.(QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS)

PHILOS PLATE 3 TO 12 HOLE (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. 1 UNIT CONSISTS OF I) PLATE - 1. PLATE SHOULD FIT ANATOMICALLY, II)CORRESPONDING LOCKING SCREWS -NUMBER OF SCREWS CORRESPONDING TO NUMBER OF HOLES IN PLATE. THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES(QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS). PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT. (THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS)

K WIRES -3.0MM X 300MM

K WIRES -2.5MM X 300MM

K WIRES -2.0MM X 300MM

K WIRES -1MM X 300MM

K WIRES -1MM X 150MM

K WIRES -1.8MM X 300MM

K WIRES -1.8MM X 150MM

K WIRES -1.5MM X 300MM

K WIRES -1.5MM X 150MM

K NAILS FOR FEMUR- 9 X 46MM

K NAILS FOR FEMUR- 9 X 44MM

K NAILS FOR FEMUR- 9 X 42 MM

K NAILS FOR FEMUR- 9 X 40 MM

K NAILS FOR FEMUR- 9 X 38 MM

K NAILS FOR FEMUR- 8 X 44 MM

CLAVICULAR ANATOMICAL LOCKING PLATES 5 TO 10 HOLES (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT.SEE TENDER DOCUMENTS

ANATOMICAL PROXIMAL TIBIA LATERAL LOCKING PLATE (HOCKEY STICK)-4 TO 12 HOLE. PLATE WITH SCREW,ALL SIZES BOTH SIDES LCP COMBI-HOLES IN THE SHAFT. SEE TENDER DOCUMENTS

ACL TITANIUM INTERFERENCE SCREW SIZES FROM 7 TO 10MM OF VARIOUS LENGTHS FROM 20 TO 35MM WITH SCREW DRIVERS.THECOMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

U TYPE STAPLES 3 MM X 30 MM

U TYPE STAPLES 3 MM X 20 MM

U TYPE STAPLES 3 MM X 10 MM

U TYPE STAPLES 2 MM X 30 MM

U TYPE STAPLES 2 MM X 20 MM

U TYPE STAPLES 2 MM X 10 MM

U TYPE STAPLES 1.5 MM X 30 MM

U TYPE STAPLES 1.5 MM X 20 MM

U TYPE STAPLES 1.5 MM X 10 MM

TOTAL SHOULDER JOINT ARTHROPLASTY (ALL SIZES ) -INCLUDES THE COMPONENTS FOR INCLUDES THE COMPONENTS FOR GLENOID, PROXIMAL HUMERUS, ARTICULATING SURFACE/LINER WITH CEMENT AND SCREWS

STEINMANN PINS - 4.0MM

STAPLE IMPACTER

SEMI TUBULAR (SMALL) - 9 HOLE

DISTAL TIBIA METAPHYSEAL LOCKING PLATES 4 TO 10 HOLES (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. SEE TENDER DOCUMENTS

DISTAL RADIUS VOLAR VARIABLE ANGLE LOCKING PLATE 2 TO 6 HOLE (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. SEE TENDER DOCUMENTS

DISTAL RADIUS VOLAR T BUTRESS LOCKING PLATE 2 TO 6 HOLE (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. SEE TENDER DOCUMENTS

DISTAL RADIUS OBLIQUE ARTICULAR LCP (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. SEE TENDER DOCUMENTS

DISTAL HUMERAL MEDIAL METAPHYSEAL LOCKING PLATE 7 TO 15 HOLE (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT.SEE TENDER DOCUMENTS

DISTAL HUMERAL MEDIAL LOCKING PLATE 3 TO 12 HOLES (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. SEE TENDER DOCUMENTS

DISTAL HUMERAL EXTRAARTICULAR LOCKING PLATE 3 TO 14 HOLES (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. SEE TENDER DOCUMENTS

DISTAL HUMERAL DORSOLATERAL LOCKING PLATE WITHOUT SUPPORT 3 TO 12 HOLES (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. SEE TENDER DOCUMENTS

DISTAL HUMERAL DORSOLATERAL LOCKING PLATE WITH SUPPORT 3 TO 12 HOLES (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT.SEE TENDER DOCUMENTS

CALCANEAL LOCKING PLATE-SMALL PLATE WITH SCREW, ALL SIZES BOTH SIDES

CALCANEAL LOCKING PLATE-MEDIUM (PLATE WITH SCREW,ALL SIZES BOTH SIDES. SEE TENDER DOCUMENTS

T DISTAL RADIUS DORSAL LOCKING PLATE 3, 4HOLE (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT.SEE TENDER DOCUMENTS

STEINMANN PINS-6 MMX9

STEINMANN PINS-5 MMX9

STEINMANN PINS-5 MMX7

STEINMANN PINS-4.5MMX9

STEINMANN PINS-4.5MMX7

STEINMANN PINS-4 MMX9

STEINMANN PINS-4 MMX7

STEINMANN PINS-4 MMX6

STEINMANN PINS-3 MMX6

SCHANZ SCREWS(CANCELLOUS 32 THREADED)-4.5MMX8

SCHANZ SCREWS(CANCELLOUS 32 THREADED)-4.5MMX6

SCHANZ SCREWS(CANCELLOUS 16 THREADED)-4.5MMX8

SCHANZ SCREWS(CANCELLOUS 16 THREADED)-4.5MMX6

SCHANZ SCREWS-5.0MMX8

SCHANZ SCREWS-5.0MMX6

SCHANZ SCREWS-4.0MMX8

SCHANZ SCREWS-4.0MMX6

SCHANZ SCREWS-3.0MMX4

SCHANZ SCREWS-2.0MMX4

EXPERT TIBIAL NAIL -TIBIAL NAIL FOR METAPHYSIAL WITH DIPHYSIAL FRACTURES.RANGE FROM DIAMETER 8MM TO 11 MM AND LENGTH FROM 280 MM TO 380MM PROXIMAL PART OF NAIL SHOULD HAVE 5 LOCKING OPTIONS, 3 OBLIQUE AND 2 MEDIO- LATERAL. DISTAL PART OF NAIL SHOULD HAVE 4 LOCKING OPTION IN MULTIPLE DIRECTIONS (ASSORTED SIZES) SEE TENDER DOCUMENTS

DISTAL TIBIA MEDIAL LOCKING PLATES 4 TO 12 HOLE (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. SEE TENDER DOCUMENTS

DISTAL TIBIA ANTEROLATERAL LOCKING PLATES 4 TO 8 HOLE (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. SEE TENDER DOCUMENTS

AMP PROSTHESIS - 45 SIZE

AMP PROSTHESIS - 43 SIZE

AMP PROSTHESIS - 41 SIZE

AMP PROSTHESIS - 39 SIZE

VERTEBRAL BODY CORPECTOMY CAGE SYSTEM WITH INSTRUMENTATION MESH TITANIUM CAGE MADE FROM MEDICAL GRADE TITANIUM FROM 12MM TO 25MM DIAMETER AND 10MM TO 100MM LENGTH. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT. THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

SPINE PEDICLES SCREWS AND RODS WITH INSTRUMENTATION PEDICLE SCREWS MONOLOCK,POLYAXIAL WITH LOCKING SCREW 4.5, 5.5,6.5 MMMADE OF MEDICAL GRADE TITANIUM LOCKING SCREWS 25 MM TO 50 MM.CONNECTING ROD MADE OF MEDICAL GRADE TITANIUM,DIAMETER SHOULDER BE 5.5MM AND 40MM TO 350MM LENGTH. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT.THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

MIS SPINE PEDICLES SCREWS AND RODS WITH INSTRUMENTATION, MIS PEDICLE SCREWS MONOLOCK,POLYAXIAL WITH LOCKING SCREW 3.5,4.5,5.5,6.5 MM MADE OF MEDICAL GRADE TITANIUM LOCKING SCREWS 25 MM TO 50 MM. CONNECTING ROD MADE OF MEDICAL GRADE TITANIUM, DIAMETER SHOULDER BE 5.5MM AND 40 MM TO 350MM LENGTH. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT.THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

LUMBAR SPINE TLIF CAGE WITH INSTRUMENTATION LUMBAR SPINE INTERBODY CAGE BULLET SHAPED,KIDNEY SHAPED INTERBODY CAGE MADE OF MEDICAL GRADE TITANIUM 7MM TO 15MM THICKNESS AND 10MM TO 35MM LONG MADE FROM MEDICAL GRADE TITANIUM INSTRUMENTATION SHOULD BE PROVIDED .PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT. THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

CERVICAL SPINE LATERAL MASS SCREWS WITH INSTRUMENTATION CERVICAL LATERAL MASS SCREWS WITH LOCKING SCREW 3.5,4.0 MM MADE OF MEDICAL GRADE TITANIUM OF LENGTH 10MM TO 32MM AND CONNECTING ROD MADE OF MEDICAL GRADE TITANIUM, DIATMETER FROM 3.5MM TO 5.5 MM WITH LENGTH FROM 4MM TO 350MM. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

ANTERIOR CERVICAL PLATE AND SCREW SYSTEM WITH INSTRUMENTATION PRELORDOSED CERVICAL PLATES4 HOLE TO10 HOLE 23MM TO 120MM WITH SELFDRILLING SCREWS AND RESCUE SCREWS3MM TO 4.5MM DIAMETER AND 8MM TO 24MM LONG.PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT.THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

ANTERIOR CERVICAL INTERBODY FUSION CAGE WITH INSTRUMENTATION,ANTERIOR CERVICAL INTERBODY FUSION CAGE MADE FROM MEDICAL GRADE TITANIUM FROM 5MM TO 12MM. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT

TAPER THREADED SCHANZ SCREW( 52 THREADED)-6MMX8

TAPER THREADED SCHANZ SCREW( 52 THREADED)-6MMX6

TAPER THREADED SCHANZ SCREW( 32 THREADED)-6MMX8

TAPER THREADED SCHANZ SCREW( 32 THREADED)-6MMX6

POSTERIOR MEDIAL PROXIMAL TIBIA LOCKING PLATES 2 TO 10 HOLE (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. 1 UNIT CONSISTS OF I) PLATE-1. PLATE SHOULD FIT ANATOMICALLY, II)CORRESPONDING LOCKING SCREWS -NUMBER OF SCREWS CORRESPONDING TO NUMBER OF HOLES IN PLATE.

OLECRANON LOCKING HOOK PLATES 4 TO 8 HOLES (PLATE WITH SCREW) LCP COMBI-HOLES IN THE SHAFT. 1 UNIT CONSISTS OF I) PLATE-1. PLATE SHOULD FIT ANATOMICALLY II)CORRESPONDING LOCKING SCREWS

MEDIAL DISTAL FEMUR LOCKING PLATES 3 TO 9 HOLED PLATE WITH SCREW,ALL SIZES BOTH SIDES LCP COMBI-HOLES IN THE SHAFT.

LCP PLATE FOR DISTAL FEMUR (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) 6- 16HOLES, LCP COMBI-HOLES IN THE SHAFT.

HIP TRACTION SCREW-8MMX10

HIP TRACTION SCREW-6.5MMX10

HIP TRACTION SCREW-4.5MMX10

DHS TROCHANTERIC SUPPORT LOCK PLATE 130, 135 DEGREES 3 TO 6 HOLES PLATE WITH SCREW, ALL SIZES BOTH SIDES

DENHAM PIN- 5MMX9

DENHAM PIN- 4MMX9

INTRA MEDULLARY NAILS - V NAIL - 11 X 38MM

INTRA MEDULLARY NAILS - V NAIL - 11 X 36MM

INTRA MEDULLARY NAILS - V NAIL - 11 X 34MM

INTRA MEDULLARY NAILS - V NAIL - 10 X 38MM

INTRA MEDULLARY NAILS - V NAIL - 10 X 36MM

INTRA MEDULLARY NAILS - V NAIL - 10 X 34MM

INTRA MEDULLARY NAILS - V NAIL - 10 X 32MM

CLAMP T-T 8 X 8 MM

BIPOLAR (UNCEMENTED) PROSTHESIS SIZE - 55

BIPOLAR (UNCEMENTED) PROSTHESIS SIZE - 53

BIPOLAR (UNCEMENTED) PROSTHESIS SIZE - 51

BIPOLAR (UNCEMENTED) PROSTHESIS SIZE - 49

BIPOLAR (UNCEMENTED) PROSTHESIS SIZE - 47

BIPOLAR (UNCEMENTED) PROSTHESIS SIZE - 45

BIPOLAR (UNCEMENTED) PROSTHESIS SIZE - 43

BIPOLAR (UNCEMENTED) PROSTHESIS SIZE - 41

BIPOLAR (UNCEMENTED) PROSTHESIS SIZE - 39

AMP PROSTHESIS - 55 SIZE

AMP PROSTHESIS - 53 SIZE

AMP PROSTHESIS - 51 SIZE

AMP PROSTHESIS - 49 SIZE

AMP PROSTHESIS - 47 SIZE

RUSH NAIL SIZE - 3 X 26 CM

RUSH NAIL SIZE - 3 X 24 CM

RUSH NAIL SIZE - 3 X 22 CM

RUSH NAIL SIZE - 2.5 X 38 CM

RUSH NAIL SIZE - 2.5 X 36 CM

RUSH NAIL SIZE - 2.5 X 34 CM

RUSH NAIL SIZE - 2.5 X 32 CM

RUSH NAIL SIZE - 2.5 X 30 CM

RUSH NAIL SIZE - 2.5 X 28 CM

RUSH NAIL SIZE - 2.5 X 26 CM

RUSH NAIL SIZE - 2.5 X 24 CM

RUSH NAIL SIZE - 2.5 X 22 CM

MALLEOLAR SCREWS - 4.5MM X 80MM

MALLEOLAR SCREWS - 4.5MM X 75MM

MALLEOLAR SCREWS - 4.5MM X 70MM

MALLEOLAR SCREWS - 4.5MM X 65MM

MALLEOLAR SCREWS - 4.5MM X 60MM

MALLEOLAR SCREWS - 4.5MM X 55MM

MALLEOLAR SCREWS - 4.5MM X 50MM

MALLEOLAR SCREWS - 4.5MM X 45MM

INTRA MEDULLARY NAILS - V NAIL - 9 X 38MM

INTRA MEDULLARY NAILS - V NAIL - 9 X 36MM

INTRA MEDULLARY NAILS - V NAIL - 9 X 34MM

INTRA MEDULLARY NAILS - V NAIL - 9 X 32MM

INTRA MEDULLARY NAILS - V NAIL - 11X 32MM

CANNULATED REAMERS - 10MM

BONE AWL SOLID & CANNULATED

WASHERS FOR 6.5 MM CC SCREWS

WASHERS FOR 4 MM CC SCREWS

SQUARE NAIL FOR ULNA SIZE - 3 X 34 CM

SQUARE NAIL FOR ULNA SIZE - 3 X 32 CM

SQUARE NAIL FOR ULNA SIZE - 3 X 30 CM

SQUARE NAIL FOR ULNA SIZE - 3 X 28 CM

SQUARE NAIL FOR ULNA SIZE - 3 X 26 CM

SQUARE NAIL FOR ULNA SIZE - 3 X 24 CM

SQUARE NAIL FOR RADIUS SIZE - 3 X 34 CM

SQUARE NAIL FOR RADIUS SIZE - 3 X 32 CM

SQUARE NAIL FOR RADIUS SIZE - 3 X 30 CM

SQUARE NAIL FOR RADIUS SIZE - 3 X 28 CM

SQUARE NAIL FOR RADIUS SIZE - 3 X 26 CM

SQUARE NAIL FOR RADIUS SIZE - 3 X 24 CM

SQUARE NAIL EXTRACTOR

SPIKED WASHERS- SMALL

SPIKED WASHERS- MEDIUM

SPIKED WASHERS- LARGE

RUSH NAIL SIZE - 3 X 38 CM

RUSH NAIL SIZE - 3 X 34 CM

RUSH NAIL SIZE - 3 X 32 CM

RUSH NAIL SIZE - 3 X 30 CM

RUSH NAIL SIZE - 3 X 28 CM

NAIL INSERTION HANDLE WITH CONICAL BOLT - FEMUR

NAIL INSERTION HANDLE WITH CONICAL BOLT

IMPACTOR / EXTRACTOR

GUIDE WIRE PLAIN

GUIDE WIRE INSERTOR

GUIDE WIRE BULLET POINT

GUIDE WIRE BALL TIPPED

DRILL SLEEVES WITH TROCHAR

DRILL BITS - 6.3MM CANNULATED

DRILL BITS - 4MM SOLID

DRILL BITS - 4MM CANNULATED

DRILL BITS - 4.5 MM

DRILL BITS - 3.5MM

DRILL BITS - 3.2MM

DRILL BITS - 3.2 MM CANNULATED

DRILL BITS -2.7MM CANNULATED

DRILL BITS - 2.7 MM

CANNULATED REAMERS - 9MM

CANNULATED REAMERS - 8MM

CANNULATED REAMERS - 7MM

CANNULATED REAMERS - 6MM

CANNULATED REAMERS - 12MM

CANNULATED REAMERS - 11MM

LOCKING SLEEVES - 4.5MM

LOCKING SLEEVES - 3.5MM

LOCKING SLEEVES - 2.5MM

DRILL BITS - 4MM

DRILL BITS - 2.7MM

DRILL BITS - 2.5MM

DRILL BITS - 2.2MM

DRILL BITS - 1.7MM

TISSUE PROTECTOR

SOLID REAMERS -8 MM

SOLID REAMERS - 9MM

SOLID REAMERS - 7MM

SOLID REAMERS - 6MM

SOLID REAMERS - 12MM

SOLID REAMERS - 11MM

SOLID REAMERS - 10MM

SCREW DRIVER CANNULATED 4.5 MM- LONG HANDLE

SCREW DRIVER CANNULATED 3.5 MM

SCREW DRIVER CANNULATED 2.7 MM

SCREW DRIVER 4.5MM

SCREW DRIVER 3.5MM

SCREW DRIVER 2.7

NAIL INSERTION HANDLE WITH CONICAL BOLT - TIBIA

NAIL INSERTION HANDLE WITH CONICAL BOLT - PROXIMAL FEMORAL NAIL

NAIL INSERTION HANDLE WITH CONICAL BOLT - HUMERUS NAIL

PROXIMAL TIBIAL L BUTRESS - 12 HOLE -LEFT AND RIGHT

PROXIMAL TIBIAL L BUTRESS - 10 HOLE -LEFT AND RIGHT

MURPHYS BONE SKID

MEASURING GAUGE

LRS (LIMB RECONSTRUCTION SYSTEM)

FEMORAL RASP STRAIGHT

FEMORAL DISTRACTOR

ETHIBOND 5.0 NONABSORBABLE SUTURE MATERIAL

ELECTRONIC PNEUMATIC TOURNIQUET

BONE SUBSTITUTES WITH ANTIBIOTIC

BONE CEMENT 40 GMS

SCREW REMOVAL FORCEPS WITH RATCHET LOCK

HOLLOW REAMER FOR REMOVAL OF DAMAGED SCREW 4.5 AND 6.5 MM

HOLLOW REAMER FOR REMOVAL OF DAMAGED SCREW 3.5 AND 4.0 MM

EXTRACTION CONICAL SCREW FOR 4.5 AND 6.5 MM SCREWS

EXTRACTION CONICAL SCREW FOR 2.7/3.5/4.0 MM SCREWS

BROKEN NAIL REMOVAL SYSTEM

SCREW INSERTION HANDLE

PLAIN GUIDE WIRE 45 CMS

GUIDE WITH THREADED TIP 45 CMS

LOCKING SLEEVES - 6.5MM

THREADED ROD (06 MM)LENGTH 075 MM

LENGTH 200,220 MM

LENGTH 100,120 MM

LENGTH 80 , 100 , 120 MM

LENGTH 200 , 220 MM

HALF RING LENGTH 140 ,160, 180 MM

PROXIMAL TIBIAL T BUTRESS - 8 HOLE -LEFT AND RIGHT

PROXIMAL TIBIAL T BUTRESS - 7 HOLE -LEFT AND RIGHT

PROXIMAL TIBIAL T BUTRESS - 5 HOLE -LEFT AND RIGHT

PROXIMAL TIBIAL T BUTRESS - 12 HOLE -LEFT AND RIGHT

PROXIMAL TIBIAL T BUTRESS - 10 HOLE -LEFT AND RIGHT

PROXIMAL TIBIAL T BUTRESS - 6 HOLE -LEFT AND RIGHT

PROXIMAL TIBIAL L BUTRESS - 9 HOLE -LEFT AND RIGHT

PROXIMAL TIBIAL L BUTRESS - 7 HOLE -LEFT AND RIGHT

PROXIMAL TIBIAL L BUTRESS - 6 HOLE -LEFT AND RIGHT

PROXIMAL TIBIAL L BUTRESS - 5 HOLE -LEFT AND RIGHT

SHORT CONNECTION PLATE 02 HOLE

LONG CONNECTION PLATE 16 HOLE

LONG CONNECTION PLATE 14 HOLE

LONG CONNECTION PLATE 12 HOLE

LONG CONNECTION PLATE 10 HOLE

LONG CONNECTION PLATE 09 HOLE

LONG CONNECTION PLATE 08 HOLE

OBLIQUE SUPPORT

FEMALE 5 HOLE

FEMALE 4 HOLE

FEMALE 3 HOLE

FEMALE 2 HOLE

POST FEMALE 1 HOLE

POST MALE 1 HOLE

THREADED SLOTTED ROD (06 MM)LENGTH 075 MM

THREADED SOCKIT 60 MM

THREADED SOCKIT 40 MM

THREADED SOCKIT 30 MM

THREADED SOCKIT 20 MM

WIRE FIXATION BOLT ( SINGLE SLOTTED )

WIRE FIXATION BOLT ( CANULATED )

TWISTED PLATE 2 HOLE

TWISTED PLATE 6 HOLE

TWISTED PLATE 5 HOLE

TWISTED PLATE 4 HOLE

TWISTED PLATE 3 HOLE

SHORT CONNECTION PLATE 07 HOLE

SHORT CONNECTION PLATE 06 HOLE

SHORT CONNECTION PLATE 05 HOLE

SHORT CONNECTION PLATE04 HOLE

SHORT CONNECTION PLATE03 HOLE

LARGE WITH CD UNIT AND ALENKEY 6 MM

GRADUATED SWIVEL CLAMP

DYNAMIC WRIST FIXATOR

DYNAMIC EXTERNAL FIXATOR

DYNA RING CLAMP

DRILL GUIDE 6 X 5.0 X 80

DRILL GUIDE 6 X 5.0 X 40

DRILL GUIDE 6 X 3.2 X 80

DRILL GUIDE 6 X 3.2 X 40

DRILL GUIDE 5 X 5.0 X 83

DRILL GUIDE 5 X 5.0 X 43

CHARNELY COMPRESSION CLAMP WITH 2 PIN

CD UNIT 75MM

CD UNIT 65MM

CD UNIT 55MM

BOLT FOR SANDWICH PLATE

BALL & SOCKET CLAMP STANDARD

ALLEN KEY 5/8MM

ILLIZAROV GRAPHIC BOX

CONNECTION PLATE WITH THREADED END 7 HOLE

CONNECTION PLATE WITH THREADED END 5 HOLE

CONNECTION PLATE WITH THREADED END 3 HOLE

WITH CD UNIT AND ALENKEY 6 MM

TEMPLATE FOR END CLAMP & CENTRAL CLAMP

T - BALL & SOCKET CLAMP

SMALL WITH CD UNIT AND ALENKEY 6 MM

SELF ADJUSTING CLAMP WITH DYNAMIC EXTERNAL FIXATOR (HTO )

SANDWICH PLATE

RAIL FIXATOR ( PEADIATRIC )

RAIL 450MM

RAIL 400MM

RAIL 350MM

RAIL 300MM

RAIL 250MM

PEDIATRIC SWIVEL CLAMP

PEDIATRIC RAIL FIXATOR 250MM

PEDIATRIC RAIL FIXATOR 200MM

PEDIATRIC RAIL FIXATOR 150MM

PEDIATRIC END CLAMP

PEDIATRIC CENTRAL CLAMP

PEDIATRIC CD UNIT

METAFICIAL CLAMP

MEDIUM WITH CD UNIT AND ALENKEY 6 MM

LRS IMPLANTS & INSTRUMENTS SET CONTAINER

FIBRE WIRE - NO 2 WITH NEEDLE

FIBRE WIRE - NO 1 WITH NEEDLE

ENDOBUTTON SIZE 25 MM

ENDOBUTTON SIZE 15 MM

ENDOBUTTON SIZE 20 MM

BAYONET TYPE 1.8 MMX16

TROCAR TYPE 1.8 MMX16

BAYONET TYPE 1.8 MM X 16

WRENCHO CUBE 4HOLE

WRENCHO CUBE3 HOLE

WRENCHO CUBE2 HOLE

WRENCHO CUBE 1HOLE

CONNECTING BOLT.,

TSR LENGTH 150 MM

TSR LENGTH 125 MM

THREADED SLOTTED ROD (06 MM)LENGTH 100 MM.,

ITALIAN FEMORAL ARCH 120 LENGTH 140 MM TO 200 MM

TENS NAIL WITH INSTRUMENTATION TITANIUM ELASTIC NAILS RANGE FROM DIAMETER 2MM TO 4.5 MM AND LENGTH 440 MM.PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT (THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

DISTAL END RADIUS LOCKING T PLATE-5 HOLE

DISTAL END RADIUS LOCKING T PLATE-4 HOLE

DISTAL END RADIUS LOCKING T PLATE-3 HOLE

CONNECTING ROD 8 MM 4TO16

CONNECTING ROD 4 MM 4TO16

CANCELLOUS SCREWS4.0MM (FULL THREADED)-60MM

CANCELLOUS SCREWS4.0MM (FULL THREADED)-55MM

CANCELLOUS SCREWS4.0MM (FULL THREADED)-50MM

CANCELLOUS SCREWS4.0MM (FULL THREADED)-45MM

CANCELLOUS SCREWS4.0MM (FULL THREADED)-40MM

CANCELLOUS SCREWS4.0MM (FULL THREADED)-30MM

CANCELLOUS SCREWS4.0MM (FULL THREADED)-28MM

CANCELLOUS SCREWS4.0MM(FULL THREADED)-26MM

CANCELLOUS SCREWS4.0MM (FULL THREADED)-24MM

CANCELLOUS SCREWS4.0MM (FULL THREADED)-22MM

CANCELLOUS SCREWS4.0MM(FULL THREADED)-20MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-80MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-75MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-70MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-65MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-60MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-55MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-50MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-45MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-40MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED35MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-30MM

CANNULATEDCANCELLOUSSCREW4.0MMSSHORTTHREADED-20MM

THREADED CANNULATED6.5MM CANCELLOUS SCREWS- 45MM

THREADED CANNULATED6.5MM CANCELLOUS SCREWS- 40MM

THREADED CANNULATED6.5MM CANCELLOUS SCREWS- 35MM

THREADED CANNULATED6.5MM CANCELLOUS SCREWS- 30MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS-100MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-95MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-90MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED- 85MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-80MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-75MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-70MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-65MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-60MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-55MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-110MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-105MM

CANNULATED CANCELLOUS SCREWS 6.5MM (16MM THREADED)-100MM

CANCELLOUS SCREWS4.0MM(SHORT THREADED)-60MM

CANCELLOUS SCREWS4.0MM (SHORT THREADED)-55MM

CANCELLOUS SCREWS4.0MM(SHORT THREADED)-50MM

CANCELLOUS SCREWS4.0MM (SHORT THREADED)-45MM

CANCELLOUS SCREWS4.0MM (SHORT THREADED)-40MM

CANCELLOUS SCREWS4.0MM SHORT THREADED-30MM

CANCELLOUS SCREWS4.0MM (SHORT THREADED)-28MM

CANCELLOUS SCREWS4.0MM (SHORT THREADED)-26MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS- 110MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS- 100MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 90MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 80MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 70MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 65MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 60MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 55MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 50MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 45MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 40MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 35MM

FULLY THREADED6.5MM CANCELLOUS SCREWS- 30MM

FULLY THREADED6.5MM CANCELLOUS SCREWS-25MM

THREADED CANNULATED6.5MM CANCELLOUS-100MM

THREADED CANNULATED6.5MM CANCELLOUS SCREWS- 95MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS- 90MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS- 85MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS- 80MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS- 75MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS- 70MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS- 65MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS SCREWS- 60MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS- 55MM

THREADED CANNULATED6.5MM CANCELLOUS SCREWSSCREWS- 50MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-70MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-65MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-60MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-55MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-110MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-105MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-100MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED-95MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED-90MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED-85MM

CANNULATED7MMCANCELLOUSSCREWS16MM THREADED-80MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED-75MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED-70MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED-65MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED-60MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED-55MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED-110MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED-105MM

CANNULATED7MMCANCELLOUSSCREWS(16MM THREADED)-100MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS-95MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS-90MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS-85MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS-80MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS-75MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS-70MM

CORTICAL 2.7MM SCREWS -32 MM

CORTICAL 2.7MM SCREWS -26MM

CORTICAL 2.7MM SCREWS -24MM

CORTICAL 2.7MM SCREWS -22MM

CORTICAL 2.7MM SCREWS -20MM

CORTICAL 2.7MM SCREWS -18MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-95MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-90MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-85MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-80MM

CANNULATED7MMCANCELLOUSSCREWS(32MM THREADED-75MM

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS-65MM.,

FULLY THREADED 6.5MMCANNULATED CANCELLOUS SCREWS-25MM.,

CORTICAL 2.7MM SCREWS - 54 MM

TUBULAR PLATE 1/3RD 3.5MM-10 HOLE

LCDCP 5 TO 12 HOLES 3.5MM 1 UNIT CONSISTS OF 1 PLATE AND 3.5MM SCREWS FOR ALL THE AVAILABLE HOLES. (QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS)

CORTICAL 2.7MM SCREWS -60 MM

CORTICAL 2.7MM SCREWS -58 MM

CORTICAL 2.7MM SCREWS -56 MM

CORTICAL 2.7MM SCREWS - 30 MM

CORTICAL 2.7MM SCREWS -52 MM

CORTICAL 2.7MM SCREWS -50 MM

CORTICAL 2.7MM SCREWS -48 MM

CORTICAL 2.7MM SCREWS -46 MM

CORTICAL 2.7MM SCREWS-28 MM

CORTICAL SCREWS 3.5MM -38MM

CORTICAL SCREWS 3.5MM -36 MM

CORTICAL SCREWS 3.5MM -34 MM

CORTICAL SCREWS 3.5MM -32 MM

CORTICAL SCREWS 3.5MM -30 MM

CORTICAL SCREWS 3.5MM -28 MM

CORTICAL SCREWS 3.5MM -24MM

CORTICAL SCREWS 3.5MM -22MM

CORTICAL SCREWS 3.5MM -20MM

CORTICAL SCREWS 3.5MM -18MM

CORTICAL SCREWS 3.5MM -16MM

CORTICAL SCREWS 3.5MM -14MM

CORTICAL SCREWS 3.5MM -12MM

CORTICAL SCREWS 3.5MM - 58 MM

CORTICAL SCREWS 3.5MM - 56 MM

CORTICAL SCREWS 3.5MM - 54 MM

CORTICAL SCREWS 3.5MM - 52 MM

CORTICAL SCREWS 3.5MM - 50 MM

CORTICAL SCREWS 3.5MM -40MM

CORTICAL SCREWS 3.5MM - 60MM

TUBULAR PLATE 1/3RD 3.5MM -9HOLE

TUBULAR PLATE 1/3RD 3.5MM -8HOLE

TUBULAR PLATE 1/3RD 3.5MM -7HOLE

TUBULAR PLATE 1/3RD 3.5MM-6 HOLE

TUBULAR PLATE 1/3RD 3.5MM-5HOLE

CORTICAL SCREWS 4.5MM - 62 MM

CORTICAL SCREWS 4.5MM - 60 MM

CORTICAL SCREWS 4.5MM - 58 MM

CORTICAL SCREWS 4.5MM - 56 MM

CORTICAL SCREWS 4.5MM - 54 MM

CORTICAL SCREWS 4.5MM - 52 MM

CORTICAL SCREWS 4.5MM - 50 MM

CORTICAL SCREWS 4.5MM - 48 MM

CORTICAL SCREWS 4.5MM - 46 MM

CORTICAL SCREWS 4.5MM - 44 MM

CORTICAL SCREWS 4.5MM - 42MM

CORTICAL SCREWS 4.5MM - 40MM

CORTICAL SCREWS 4.5MM - 38MM

CORTICAL SCREWS 4.5MM - 36MM

CORTICAL SCREWS 4.5MM - 34MM

CORTICAL SCREWS 4.5MM - 32MM

CORTICAL SCREWS 4.5MM - 30MM

CORTICAL SCREWS 4.5MM - 28MM

CORTICAL SCREWS 4.5MM - 26MM

CORTICAL SCREWS 4.5MM - 24MM

CORTICAL SCREWS 4.5MM - 22MM

CORTICAL SCREWS 3.5MM -48 MM

CORTICAL SCREWS 3.5MM -46 MM

CORTICAL SCREWS 3.5MM -44 MM

CORTICAL SCREWS 3.5MM -42 MM

CORTICAL SCREWS 4.5MM - 70 MM

CORTICAL SCREWS 4.5MM - 68 MM

CORTICAL SCREWS 4.5MM - 66 MM

CORTICAL SCREWS 4.5MM - 64 MM

BRUN SPRAT CURETTES - 1 STRAIGHT

BRUN SPRAT CURETTES - 1 CURVED

BRUN SPRAT CURETTES - 0 STRAIGHT

BRUN SPRAT CURETTES - 0 CURVED

BONE REDUCTION FORCEPS SELF CENTERED

BONE NIBBLERS STRAIGHT - 9 INCHES DOUBLE ACTION

BONE NIBBLERS STRAIGHT - 7 1/2 INCHES SINGLE ACTION

BONE NIBBLERS STRAIGHT - 5 1/2 INCHES SINGLE ACTION

BONE NIBBLERS STRAIGHT - 5 1/2 INCHES DOUBLE ACTION

BONE NIBBLER DUCK BILLED - 9 INCHES DOUBLE ACTION

BONE NIBBLER DUCK BILLED - 5 1/2 INCHE DOUBLE ACTION

BONE HOOKS - SMALL

BONE HOOKS - MEDIUM

BONE HOOKS - LARGE

BONE HOLDING FORCEPS - 9CM

BONE HOLDING FORCEPS - 27CM

BONE CUTTING FORCEPS - STRAIGHT

BONE CUTTING FORCEPS - ANGLED

BOEHLER STIRUP - MEDIUM 90 MM

BOEHLER STIRUP - LARGE 150 MM

ADSONS RETRACTORS

GIGLI SAW HANDLE T- STYLE

GIGLI SAW BLADE - 16 INCHES

GIGLI SAW BLADE - 12 INCHES

FREER DOUBLE EDGED ELEVATOR

DRILL SLEEVES - 60 MM TIP

DRILL SLEEVES - 40 MM TIP

DOUBLE ENDED CURETTE 4MM/5MM

DOUBLE ACTION WIRE EXTRACTION PLIERS - 6MM

DOUBLE ACTION WIRE EXTRACTION PLIERS - 4MM

DISC FORCEPS - 14MM

DISC FORCEPS - 12MM STRAIGHT AND CURVED

DISC FORCEPS - 10 MM

DEPTH GAUGE - SMALL

DEPTH GAUGE - MINI

DEPTH GAUGE - LONG

COBBS SPINAL ELEVATOR

BRUN SPRAT CURETTES - 2/0 STRAIGHT

BRUN SPRAT CURETTES - 2/0 CURVED

BRUN SPRAT CURETTES - 2 STRAIGHT

BRUN SPRAT CURETTES - 2 CURVED

LOWMANS BONE CLAMPS - 17CM

LOWMANS BONE CLAMPS - 14.5 CM

LAMINECTOMY RONGEURS-UP - 5MM

LAMINECTOMY RONGEURS-UP - 3MM

LAMINECTOMY RONGEURS-UP - 1MM

LAMINECTOMY RONGEURS-FORWARD - 5MM

LAMINECTOMY RONGEURS-FORWARD - 3MM

LAMINECTOMY RONGEURS-FORWARD - 1MM

LAMINECTOMY RONGEURS-FORWARD

KUNTSCHER DIAMOND POINTING BONE AWL - STRAIGHT

KUNTSCHER DIAMOND POINTING BONE AWL - CANNULATED

KRAMER WIRE SPLINTS

K NAIL EXTRACTOR

IL NAIL EXTRACTOR

HOLLOW REAMER FOR REMOVAL OF DAMAGED SCREW 4.5 & 6.5 MM

HOLLOW REAMER FOR REMOVAL OF DAMAGED SCREW 3.5 & 4.0 MM

HOHMANNS RETRACTOR - 8MM

HOHMANNS RETRACTOR - 40MM 90 DEGREE

HOHMANNS RETRACTOR - 22MM 120 DEGREE

HOHMANNS RETRACTOR - 22MM

HOHMANNS RETRACTOR - 10MM

HENNINGS PLASTER SPREADER

SCALP CONTOUR SELF RETAINING RETRACTORS( SMALL, MEDIUM & LARGE)

PLASTER CUTTING SAW

PIN CUTTER LARGE 57.5 CM

PERIOSTEAL ELEVATORS - 6MM STRAIGHT

PERIOSTEAL ELEVATORS - 6MM CURVED

PERIOSTEAL ELEVATORS - 3MM CURVED

PERIOSTEAL ELEVATORS - 14MM STRAIGHT

PERIOSTEAL ELEVATORS - 14MM CURVED

PENFIELDS ELEVATOR

PARALLEL PLIERS WITH CUTTER

OSTEOTOMES STRAIGHT - 8MM

OSTEOTOMES STRAIGHT - 5MM

OSTEOTOMES STRAIGHT - 4MM

OSTEOTOMES STRAIGHT - 15MM

OSTEOTOMES STRAIGHT - 10MM

OSTEOTOMES CURVED - 8MM

OSTEOTOMES CURVED - 6MM

OSTEOTOMES CURVED - 15MM

OSTEOTOMES CURVED - 10MM

NERVE ROOT RETRACTOR

MINI HOHMANNS RETRACTOR - 8MM

MINI HOHMANNS RETRACTOR - 6MM

LENGTH 140 ,160,180 MM

WIRE PULLING FORCEPS

WIRE CUTTER - SINGLE ACTION

WIRE CUTTER - DOUBLE ACTION CURVED

WIRE AND PIN BENDER

UNIVERSAL ROD BENDER

UNIVERSAL HAND DRILL WITH CANNULATED CHUCK-OPEN GEAR TYPE

UNIVERSAL DRILL GUIDE - 4.5MM

UNIVERSAL DRILL GUIDE - 3.5MM

THOMAS SPLINT - SMALL SIZE

THOMAS SPLINT - MEDIUM SIZE

THOMAS SPLINT - LARGE SIZE

STAINLESS STEEL WIRE - 22 G

STAINLESS STEEL WIRE - 20G

STAINLESS STEEL WIRE - 18G

STAINLESS STEEL WIRE - 16G

SMALL COUNTER SINKS

LANGENBACK RETRACTOR - 15X45

LANGENBACK RETRACTOR - 10X45

LANGENBACK RETRACTOR - 10X32

VA DISTAL RADIUS BUTTRESS LOCKING PLATE (PLATE WITH SCREW) (ALL SIZES BOTH SIDES) LCP COMBI-HOLES IN THE SHAFT. 1 UNIT CONSISTS OF I) PLATE - 1. PLATE SHOULD FIT ANATOMICALLY, II)CORRESPONDING LOCKING SCREWS -NUMBER OF SCREWS CORRESPONDING TO NUMBER OF HOLES IN PLATE. THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES(QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS). PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT. (THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS)

CLAMP 8 MM 10 MM 11 MM USE FOR (CLAMP)

CLAMP 8 MM, 10 MM (NUT)11 MM (FIXATION BOLT)

USE FOR (D.U) 6 MM 7 MM

HINGES 90 DEGREE

LENGTH 90 DEGREE 140 MM TO 200 MM

HUMERUS INTERLOCKING NAIL WITH INSTRUMENTATION-RANGE FROM DIAMETER 6MM TO 8MM AND LENGTH FROM 180 TO 300 MM. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT. EACH LINTERLOCKING NAIL UNIT CONSIST OF I INTERLOCKING NAIL-1 NO II INTERLOCK BOLTS X 4 NUMBERS THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

TOTAL KNEE ARTHROPLASTY TKR PROSTHESIS-CEMENTED. EACH UNIT CONSISTS ONE OF NUMBER OF VARIABLE SIZES OF 1. FEMORAL COMPONENT COCR RIGHT LEFT 2. TIBIAL TRAY KEELED COCR 3. UHMWPE TIBIAL INSERT 4. UHMWPE PATELLA COMPONENT FIXED 5. 2 PACKETS OF ANTIBIOTIC CEMENT 20 GMS EACH SHELF LIFE OF ALL ITEMS PRIOR TO EXPIRY DATE MUST BE AT LEAST 3-5 YEARS.ALL SIZES OF IMPLANTS AND INSTRMENTATION TO BE PROVIDED ON CASE TO CASE BASIS (THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

TOTAL HIP ARTHROPLASTY THR PROSTHESIS UNCEMENTED EACH UNIT CONSISTSOF ONE NUMBER OF VARIABLE SIZES OF 1.UNCEMENTED FEMORAL STEM HA COATED 2.UNCEMENTED POROUS COATED CUP.3.ACETABULAR CUP LINER UHMWPE 4. FEMORAL HEAD DIAMETER 28MM,32MM, 36 MM,WITH ADJUSTABLE NECK LENGTHS 5.CANCELLOUS BONE SCREWS 6.5MM 2 NOS 20MM,25MM,SHELF LIFE OF ALL ITEMS PRIOR TO EXPIRY DATE MUST BE AT LEAST 3-5 YEARS. ALL SIZES OF IMPLANTS AND INSTRMENTATION TO BE PROVIDED ON CASE TO CASE BASIS

TOTAL HIP ARTHROPLASTY THR PROSTHESIS CEMENTED. EACH UNIT CONSISTS ONE NUMBER OF VARIABLE SIZES OF 1.CEMENTED FEMORAL STEM TRIPLE TAPER TYPE 2.CEMENTED UHMWPE FLANGED CUP. 3. FEMORAL HEAD DIAMETER 28MM,32MM,36 MM WITH ADJUSTABLE NECK LENGTH 4. CEMENT RESTRICTOR 5. CANAL CENTRALISER 6. ANTIBIOTIC BONE CEMENT 2 PACKETS OF 40G EACH SHELF LIFE OF ALL ITEMS, PRIOR TO EXPIRY DATE MUST BE AT LEAST 3-5 YEAR. ALL SIZES OF IMPLANTS AND INSTRMENTATION TO BE PROVIDED ON CASE TO CASE BASIS

SUPRACONDYLAR NAILS FEMUR 1. RANGE FROM 10 MM DIA TO 12 MM DIAMETER AND LENGTH 200 TO 350 MM 2. UNITS EACH SUPRACONDYLAR NAIL UNIT CONSIST OF I INTERLOCKING NAIL-1 NO II INTERLOCK BOLTS X 4 NUMBERS.2 NUMBERS OF 5MM PROXIMAL BOLTS LENGTHS RANING FROM 32 MM TO 40MM AND 2 NUMBERS 6MM DISTAL BOLT. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

STRAIGHT DISTAL RADIUS DORSAL LOCKING PLATE 3, 4HOLE PLATE WITH SCREW ALL SIZES BOTH SIDES LCP COMBI-HOLES IN THE SHAFT. 1 UNIT CONSISTS OF I PLATE - 1. PLATE SHOULD FIT ANATOMICALLY, IICORRESPONDING LOCKING SCREWS -NUMBER OF SCREWS CORRESPONDING TO NUMBER OF HOLES IN PLATE. THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT.

SCREWS,2.5MM,3M,4MM HEADLESS COMPRESSION HERBERT SCREWS, SIZES 12MM TO 36MM TITANIUM THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

PROXIMAL TIBIA T BUTTRESS LOCKING PLATES 4 TO 12 HOLES PLATE WITH SCREW ALL SIZES BOTH SIDES LCP COMBI-HOLES IN THE SHAFT. 1 UNIT CONSISTS OF I PLATE - 1. PLATE SHOULD FIT ANATOMICALLY, II CORRESPONDING LOCKING SCREWS-NUMBER OF SCREWS CORRESPONDING TO NUMBER OF HOLES IN PLATE. THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES(QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT.

PROXIMAL TIBIA L BUTTRESS LOCKING PLATES 4 TO 12 HOLES PLATE WITH SCREW ALL SIZES BOTH SIDES LCP COMBI-HOLES IN THE SHAFT. 1 UNIT CONSISTS OF I PLATE - 1. PLATE SHOULD FIT ANATOMICALLY, IICORRESPONDING LOCKING SCREWS -NUMBER OF SCREWS CORRESPONDING TO NUMBER OF HOLES IN PLATE. THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT.

PROXIMAL FEMORAL LOCKING PLATE 3 TO 11 HOLES PLATE WITH SCREW ALL SIZES BOTH SIDES LCP COMBI-HOLES IN THE SHAFT. 1 UNIT CONSISTS OF I PLATE -1. PLATE SHOULD FIT ANATOMICALLY, IICORRESPONDING LOCKING SCREWS -NUMBER OF SCREWS CORRESPONDING TO NUMBER OF HOLES IN PLATE. THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT. THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

PLATE 4.5MM RECONSTRUCTION PLATE 4 TO 12 HOLES.1 UNIT CONSISTS OF 1 PLATE AND 4.5MM SCREWS FOR ALL THE AVAILABLE HOLES. QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS

PLATE 4.5MM NARROW LCP 6 TO 12 HOLES, 14 HOLE,16 HOLE.1 UNIT CONSISTS OF 1 PLATE AND LOCKING SCREWS FOR ALL THE AVAILABLE HOLES. THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS

PLATE 3.5MM LCP 6 TO 12 HOLES. 1 UNIT CONSISTS OF 1 PLATE AND LOCKING SCREWS FOR ALL THE AVAILABLE HOLES. THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS

PFN WITH HELICAL BLADE PFN A2 1. RANGE PROXIMAL FEMORAL NAILS FROM 9 MM DIA TO 12 MM DIA LENGTH 170 MM TO 300 MM 2. UNITS EACH PROXIMAL FEMORAL NAIL UNIT CONSIST OF I PROXIMAL FEMORAL NAIL-1 NO 9 MM DIA TO 12MM DIA LENGTH 170 MM TO 300 MM I PFN BLADE-1 NO.75MM - 120MM III 4.9 MM LOCKING BOLT X 2 28-48MM PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

PFN NAIL SHORT - 1. RANGE-PROXIMAL FEMORAL NAILS BOTH SIDES FROM 9 MM DIA TO 11 MM DIA LENGTH 250 MM 2. UNITS EACH PROXIMAL FEMORAL NAIL UNIT CONSIST OF I PROXIMAL FEMORAL NAIL - 1 NO 9 MM DIA TO 11 MM DIA LENGTH 380 MM TO 440 MM II 8 MM CANNULATED LOCKING BOLT 70-110MM X 1, 6 MM CANNULATED LOCKING BOLT 55-95MM X 1 , 4.9 MM LOCKING BOLT 28 - 48MM X2. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

PFN NAIL LONG -1.RANGE PROXIMAL FEMORAL NAILS BOTH SIDES FROM 9 MM DIA TO 11 MM DIA LENGTH 380 MM TO 440 MM 2. UNITS EACH PROXIMAL FEMORAL NAIL UNIT CONSIST OF I PROXIMAL FEMORAL NAIL - 1 NO 9 MM DIA TO 11 MM DIA LENGTH 380 MM TO 440 MM II 8 MM CANNULATED LOCKING BOLT 70-110MM X 16 MM CANNULATED LOCKING BOLT 55-95MM X1 , 4.9 MM LOCKING BOLT 28 - 48MM X 2. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

L DISTAL RADIUS DORSAL LOCKING PLATE 3, 4HOLE PLATE WITH SCREW ALL SIZES BOTH SIDES LCP COMBI-HOLES IN THE SHAFT. 1 UNIT CONSISTS OF PLATE-1. PLATE SHOULD FIT ANATOMICALLY, II CORRESPONDING LOCKING SCREWS -NUMBER OF SCREWS CORRESPONDING TO NUMBER OF HOLES IN PLATE.THE SCREWS SHOULD MATCH WITH THREADS OF THE LOCKING HOLES QUOTE FOR ENTIRE ASSEMBLY WITH SCREWS. PROVISION FOR EXCHANGE OF UNUSED SIZES SHOULD BE PRESENT.THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

INTRAMEDULARY NAIL, INTER LOCKING TIBIA NAIL1. RANGE TIBIAL INTERLOCKING NAILS FROM 8 MM DIA TO 12 MM DIAMETER AND LENGTH FROM 280 MM TO 400 MM 2. UNITS EACH TIBIAL INTERLOCKING NAIL UNIT CONSIST OF I TIBIAL INTERLOCKING NAIL-1 NUMBER II 3.9 4.9MM INTERLOCK BOLTS X 4 NUMBERS. THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

INTRAMEDULARY NAIL, INTER LOCKING FEMUR NAIL 1. RANGE FEMUR INTERLOCKING NAILS FROM 9 MM DIA TO 13 MM DIAMETER AND LENGTH 320 TO 440 MM 2. UNITS EACH LINTERLOCKING NAIL UNIT CONSIST OF I INTERLOCKING NAIL-1 NOII INTERLOCK BOLTS X 4 NUMBERS. THE COMPLETE SET OF INSTRUMENTS SHOULD BE SUPPLIED ON LOANER BASIS

DHS SET-THE IMPLANTS SHOULD BE AVAILABLE WITH LONG BARREL 38MM AND SHORT BARREL LENGTH OF 25MM. THE DHS BARREL PLATE SHOULD BE AVAILABLE IN THE FOLLOWING CCD ANGLE 130, 135,140,145 AND 150 THE DHS BARREL PLATE SHOULD BE AVAILABLE IN 4-6 HOLES 12.5 MM DHS BLADE SCREW IS REQUIRED IN 65-120 MM INCREMENTS 1 UNIT CONSISTS OF I DHS SCREW-1 NOS II DHS PLATE-1 NOS III 4.5 MM CORTEX SCREW-NUMBER OF SCREWS CORRESPONDING TO NUMBER OF HOLES IN BARREL PLATE.