Drilling of New Borewell and Installation ppump Motor in Chikkbidarakallu Tengina Thota Main Road Chikkabidarakallu in Madanayakanahalli CMC Limit(Reserved for ST)

Drilling of New Borewell and Installation ppump Motor in Chikkbidarakallu Tengina Thota Main Road Chikkabidarakallu in Madanayakanahalli CMC Limit(Reserved for ST)

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 100 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 100 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 100 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 100 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 100 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 100 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Logging / scanning of borewell at any depth continuously with the help of Logger unit including the cost of transportation charges, crew charges, stationery charges and cost of consumables etc. (sl n...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1219 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 1mm (minimum)....

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8014-2000;1Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Supplying and drawing 1 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to11:8110-1984 and vi...

Providing, Laying and Fixing of GI pipes conforming to IS 1219:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing wrought mild steel (galvanized) GI collar confirming to IS 1219-II, 1991 with latest amendments if any For 50 mm dia GI collar:(sl no 11.6.6 page no129 Vol-5 Schedule of Rates For 2023-24 ...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Supply, installing,testing and commissioning COMMON control panel

consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog

Supplying &fixingof Porcelain fuse channel withcut out on existing wooden/panel using necessary nuts, bolts and washers. 61 A (sl no 5.7.3 page no 11 Vol-6 Schedule of Rates For2023-24)

Supplying&fixingminiature circuit breakers onexistingMCB distribution boards using necessary fixingmaterialsand'C'Type curve, indicator ON/OFF, energy cross-1 with Short circuit breaking capacity of...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped ...

Supplyingandfixingangleironframeworkfabricatedoutof M.S. angle iron..and M.S.Flat......with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x ...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm (sl no13.25.1 page no 154 Vol-5 Schedule of Rates For 2...

Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1219-II, 1991 with latest amendments if any For 50 mm dia GI Union (sl no 11.12.6 page no 131 Vol-5 Schedule of...

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1219-II, 1991 with latest amendments if any for: For 50 mm dia GI elbow (sl no11.7.6 page no 129 Vol-5 Schedul...

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. (sl no13.36 pa...

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-1975 ( Sl no: ...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 12/61 A three phase 4 wire whole current class-1 Accuracy Energy Meter. ( PWD Ele SR 2023-24 page no 19 of 105 item no 5.35)

Aluminium End Terminal (Lug) 16 Sqmm ( ESCOMs SR 2021-24 page no : 27 of 81 Slno: 470 item no: 60.02 Material Code: 288

Supplying and fixing hylum plastic sheet 3mm thick with necessary

nitches for fixing switches, regulators etc., and fixing on existing

wood or metal box using N. F. screws.