CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL

BILL OF QUANTITIES (BOQ)

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

1 CIVIL & INTERIOR WORKS 59,67,459.25 4,71,767.00

4 KITCHEN EQUIPMENTS 0.00 92,98,750.00

5 FIRE SUPPRESSION SYSTEM 0.00 6,58,300.00

6 VENTILATION SYSTEM 14,13,708.00 5,87,900.00

GRAND TOTAL 2,09,30,447.00

GRAND TOTAL 2,09,30,447.00

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

SUMMARY OF WORKS _ CIVIL

SR. NO. ITEM DSR AMOUNT NDSR AMOUNT

1 DISMANTALLING 6,01,276.25 0.00

2 EARTH WORKS, PCC & RCC WORKS 25,27,675.50 0.00

3 FLOORING, MASONRY & WET WORKS 19,58,793.25 1,22,180.00

6 FINISHES & MISCELLANEOUS 3,09,094.75 2,10,000.00

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

BOQ OF WORKS _ CIVIL

SR. NO. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

A DISMANTALLING

Demolishing brick tile covering in terracing including stacking of

1 15.26 serviceable material and disposal of unserviceable material within SQM 250.00 105.35 26,337.50

50 metres lead.

Demolishing mud phaska in terracing and disposal of material

within 50 metres lead

Demolishing brick work manually / by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per direction of

Engineer-in-Charge.

Demolishing cement concrete manually / by mechanical means

4 15.2 including disposal of material within 50 metres lead as per

direction of Engineer-in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) CUM 25.00 2,434.25 60,856.25

Disposal of building rubbish / malba / similar unserviceable,

dismantled or waste materials by mechanical means, including

5 15.60 loading, transporting, unloading to approved municipal dumping CUM 300.00 263.95 79,185.00

ground or as approved by Engineer-in-charge, beyond 50 m initial

lead, for all leads including all lifts involved.

TOTAL OF DISMANTALLING 6,01,276.25 0.00

B EARTH WORKS, PCC & RCC WORKS

Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or drains (not

exceeding 1.5 m in width or 10 sqm on plan), including dressing of

sides and ramming of bottoms, lift upto 1.5 m, including getting

out the excavated soil and disposal of surplus excavated soil as

directed, within a lead of 50 m.

2.8.1 All kinds of soil

Digitally signed by AMIT

Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm in

depth, consolidating each deposited layer by ramming and

watering, lead up to 50 and for all lift.

PLAIN CEMENT CONCRETE(1:4:8) WITHOUT FLY ASH

Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work up

to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural

4.1.8 sources : 8 graded stone aggregate 40 mm nominal size CUM 28.00 6,812.00 1,90,736.00

derived from natural sources)

Providing and laying in position ready mixed or site batched

design mix cement concrete for reinforced cement concrete

work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland

Slag cement, admixtures in recommended proportions as per IS:

9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including

pumping of concrete to site of laying, curing, carriage for all

leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge, for the

following grades of concrete.:

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the specified

minimum cement content, the contractor shall have discretion to

either re-design the mix or bear the cost of extra cement.

5.33.1 All works upto plinth level

Concrete of M30 grade with minimum cement content of 350 kg

5.33.2 All works above plinth level upto floor V level

Concrete of M25 grade with minimum cement content of 330 kg

Concrete of M30 grade with minimum cement content of 350 kg

Centering and shuttering including strutting, propping etc. and

removal of form for

5.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete SQM 60.00 392.15 23,529.00

5.2 5.9.3 Suspended floors, roofs, landings, balconies and access platform SQM 160.00 927.25 1,48,360.00

Digitally signed by AMIT

5.3 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 124.00 736.60 91,338.40

5.4 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts SQM 96.00 961.30 92,284.80

Steel reinforcement for R.C.C. work including straightening,

6 5.22 cutting, bending, placing in position and binding all complete

upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. KG 2,100.00 107.85 2,26,485.00

Steel reinforcement for R.C.C. work including straightening,

7 5.22A cutting, bending, placing in position and binding all complete

above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. KG 9,000.00 107.85 9,70,650.00

TOTAL OF EARTH WORKS, PCC & RCC WORKS 25,27,675.50 0.00

C FLOORING, MASONRY & WET WORKS

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate) finished with a floating coat of neat

cement, including cement slurry, but excluding the cost of nosing

of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 310.00 614.20 1,90,402.00

Providing and applying fibre reinforced elastomeric liquid water

proofing membrane with resilient acrylic polymers having Sun

Reflectivity Index (SRI) of 105 on top of concrete roof in three

coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric

waterproofing liquid (dilution with water in the ratio of 3:1) and

2 22.22A two coats of undiluted elastomeric waterproofing liquid (dry film SQM 215.00 536.10 1,15,261.50

thickness of complete application/system not less than 500

microns). The operation shall be carried out after scrapping and

properly cleaning the surface to remove loose particles with wire

brushes, complete in all respect as per the direction of Engineer-in-

Digitally signed by AMIT

Providing and applying fibre reinforced elastomeric liquid water

proofing membrane with resilient acrylic polymers having Sun

Reflectivity Index (SRI) of 105 on top of concrete roof in three

coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric

waterproofing liquid (dilution with water in the ratio of 3:1) and

3 two coats of undiluted elastomeric waterproofing liquid (dry film SQM 152.00 531.10 80,727.20

thickness of complete application/system not less than 500

microns). The operation shall be carried out after scrapping and

properly cleaning the surface to remove loose particles with wire

brushes, complete in all respect as per the direction of Engineerin-

Kota stone slab flooring over 20 mm (average) thick base laid

over and jointed with grey cement slurry mixed with pigment to

4 11.26 match the shade of the slab, including rubbing and polishing

complete with base of cement mortar 1 : 4 (1 cement : 4 coarse

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and

pillars laid on 12 mm (average) thick cement mortar 1:3 (1

6 11.27 cement: 3 coarse sand) and jointed with grey cement slurry mixed SQM 15.00 2,354.70 35,320.50

with pigment to match the shade of the slabs, including rubbing

and polishing complete.

Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of approved

make, in all colours, shades, except White, Ivory, Grey, Fume Red

Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4

Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including pointing the joints with white cement and matching

pigments etc., complete.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm

x 20 mm) with SRI (solar refractive index) > 78, solar reflection >

0.70 and initial emittance > 0.75 on waterproof and sloped

surface of terrace, laid on 20 mm thick cement sand mortar in the

8 12.55 ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with SQM 152.00 1,703.95 2,59,000.40

mix of white cement & marble powder in ratio of 1:1, including

rubbing and polishing of the surface upto 3 cuts complete,

including providing skirting upto 150 mm height along the parapet

walls in the same manner.

Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in foundation and plinth in:

6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) CUM 68.00 7,370.65 5,01,204.20

Digitally signed by AMIT

Half brick masonry with common burnt clay F.P.S. (non modular)

10 6.13 bricks of class designation 7.5 in superstructure above plinth level

up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 10.00 1,123.80 11,238.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S.

bars at every third course of half brick masonry.

12 13.1 12 mm cement plaster of mix :

13 13.4 12 mm cement plaster of mix :

POP PUNNING (12mm-15mm) : Providing and fixing Average

12mm to 15mm thick POP Punning over cement plaster in line &

plumb finished smooth to receive paint. (Internal surfaces of

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by

15 Engineer-in-Charge, in skirting, risers of steps and dados, over 12 SQM 190.00 1,267.95 2,40,910.50

mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per sqm, including

pointing in white cement mixed with pigment of matching shade

TOTAL OF FLOORING, MASONRY & WET WORKS 19,58,793.25 1,22,180.00

Digitally signed by AMIT

GYPBOARD CEILING :- Providing and fixing false ceiling at all

height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side inclusive) as per IS :

277 and consisting of angle cleats of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges of 26 mm

each having lips of 10.5 mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter channels 0.5

mm thick 27 mm high having flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats

of primer suitable for board, all as per manufacturer's specification

and also including the cost of making openings for light fittings,

grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of

painting with :

12.5 mm thick tapered edge gypsum plain board conforming to

IS: 2095- Part I

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band

all round the mineral fibre/ gypsum ceiling. In order to make the

2 MR Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling by RMT 65.00 367.00 23,855.00

upto 100mm as per drawings. (visible surface of gypsum band to

not exceed 100mm) including plastic emulsion paint.

Digitally signed by AMIT

Providing and fixing tiled false ceiling of specified materials of size

595x595 mm in true horizontal level, suspended on inter locking

metal grid of hot dipped galvanized steel sections ( galvanized @

120 grams/ sqm, both side inclusive) consisting of main “T” runner

with suitably spaced joints to get required length and of size 24x38

mm made from 0.30 mm thick (minimum) sheet, spaced at 1200

mm center to center and cross “T” of size 24x25 mm made of 0.30

mm thick (minimum) sheet, 1200 mm long spaced between main

“T” at 600 mm center to center to form a grid of 1200x600 mm and

secondary cross “T” of length 600 mm and size 24x25 mm made of

0.30 mm thick (minimum) sheet to be interlocked at middle of the

1200x600 mm panel to form grids of 600x600 mm and wall angle

of size 24x24x0.3 mm and laying false ceiling tiles of approved

3 12.52 texture in the grid including, required cutting/making, opening for

services like diffusers, grills, light fittings, fixtures, smoke detectors

etc. Main “T” runners to be suspended from ceiling using GI slotted

cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia

and 50 mm long dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at

1200 mm center to center along main T, bottom exposed width of

24 mm of all T-sections shall be pre-painted with polyester paint,

all complete for all heights as per specifications, drawings and as

directed by Engineer-in-charge.

12.52.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles

of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G

I sheet having galvanizing of 100 gms/sqm (both sides inclusive)

and electro statically polyester powder coated of thickness 60

microns (minimum), including factory painted after bending.

TOTAL OF CEILING 2,36,227.25 23,855.00

D DOORS & WINDOWS

Digitally signed by AMIT

Providing and fixing factory made single extruded WPC (Wood

Polymer Composite) solid door/window/Clerestory windows &

other Frames/ Chowkhat comprising of virgin PVC polymer of K

value 58-60 (Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/ wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100 gms) fabricated

with miter joints after applying PVC solvent cement and screwed

with full body threaded star headed SS screws having minimum

frame density of 750 kg/cum, screw withdrawal strength of 2200 N

(Face) & 1100 N (Edge), minimum compressive strength of 58

N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread

of flame of Class A category with property of being termite/borer

proof, water/moisture proof and fire retardant and fixed in

position with M.S hold fast/lugs/SS dash fasteners of required dia

and length complete as per direction of Engineer-In- Charge. (M.S

hold fast/lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5 mm tolerance

in dimensions i.e depth and width of profile shall be acceptable.

Variation in profile dimensions on plus side shall be acceptable

but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood

Polymer Composite) solid plain flush door shutter of required size

comprising of virgin polymer of K value 58-60 (Suspension Grade),

calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity

index of 12 for 100 gms) having minimum density of 650 kg/cum

and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),

2 26.87 minimum compressive strength 50 N/mm2, modulus of elasticity

850 N/mm2 and resistance to spread of flame of Class A category

with property of being termite/borer proof, water/moisture proof

and fire retardant and fixing with stainless steel butt hinges of

required size with necessary full body threaded star headed

counter sunk S.S screws, all as per direction of Engineer-In- Charge.

(Note: stainless steel butt hinges and necessary S.S screws shall be

paid separately)

Digitally signed by AMIT

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to

frame with 10 mm diameter bolts, nuts and wooden plugs and

3 9.53 embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 EACH 48.00 228.85 10,984.80

cement : 3 coarse sand : 6 graded stone aggregate 20mm

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm

thick MDF, on an existing Plywood surface.

Providing and fixing factory made ISI marked steel glazed doors,

windows and ventilators, side /top /centre hung, with beading

and all members such as F7D,F4B, K11 B and K12 B etc. complete

of standard rolled steel sections, joints mitred and flash butt

5 10.11 welded and sash bars tenoned and riveted, including providing

and fixing of hinges, pivots, priming coat of approved steel primer,

but excluding the cost of other fittings,glass panes complete all as

per approved design, (sectional weight of only steel members

shall be measured for payment).

Fixing with carbon steel galvanised dash fastener of required

dia and size (to be paid for separately)

Providing and fixing M.S. Tubular frames for doors, windows,

ventilators and cupboard with rectangular/ L-Type sections, made

of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded

finish, with profiles of required size, including fixing of necessary

butt hinges and screws and applying a priming coat of approved

Fixing with carbon steel galvanised dash fastener of required dia

and size (to be paid for separately)

Providing and fixing carbon steel galvanised (minimum coating 5

micron) dash fastener of 10 mm dia double threaded 6.8 grade

(yield strength 480 N/mm2), counter sunk head, comprising of 10

mm dia polyamide PA 6 grade sleeve, including drilling of hole in

frame , concrete/ masonry, etc. as per direction of Engineer-in-

Providing & fixing fly proof wire gauze to windows, clerestory

8 10.29 windows & doors with M.S. Flat 15x3 mm and nuts & bolts

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4

mm aperture on both sides

Providing & fixing glass panes with putty and glazing clips in steel

doors, windows, clerestory windows, all complete with :

10.30.2 5.5 mm thick glass panes SQM 10.00 1,390.15 13,901.50

Digitally signed by AMIT

MORTICE LOCK AND LEVER HANDLES- Providing and installing

Tubular Handle in SS packaged with Mortice lockset 55mm

backset, 20 SS forend, SS strike plate and EP Cylinder for all flush

TOTAL OF DOORS & WINDOWS 3,34,392.25 1,15,732.00

E FINISHES & MISCELLANEOUS

Applying priming coats with primer of approved brand and

1 13.85 manufacture, having low VOC (Volatile Organic Compound)

With water thinnable cement primer on wall surface having VOC

content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior

grade, having VOC (Volatile Organic Compound ) content less

2 13.83 than 50 grams/ litre. of approved brand and manufacture,

including applying additional coats wherever required to achieve

even shade and colour.

Finishing walls with Acrylic Smooth exterior paint of required

New work (Two or more coat applied @ 1.67 ltr/10 sqm over

13.46.1 and including priming coat of exterior primer applied @ 0.90 SQM 235.00 160.60 37,741.00

Providing and fixing double scaffolding system (cup lock type) on

the exterior side of building/structure, upto 25 metre height, above

ground level, including additional rows of scaffolding in stepped

manner as per requirement of site, made with 40mm dia M.S.

tube, placed 1.5 metre centre to centre, horizontal & vertical

tubes joint with cup & lock system with M.S. Tubes, M.S. tube

challis, M.S. clamps and staircase system in the scaffolding for

working platform etc. and maintaining it in a serviceable

condition for execution of work of cleaning and/ or pointing and/

or applying chemical and removing it thereafter. The scaffolding

system shall be stiffened with bracings, runners, connecting with

the building etc, wherever required, if feasible, for inspection of

work at required locations with essential safety features for the

workmen etc., complete as per directions and approval of

Engineer-in-charge. Note:- (1) The elevational area of the

scaffolding shall be measured for payment purpose. (2) The

payment will be made once only for execution of all items for

Digitally signed by AMIT

Preparation of complete set of arhchiteural drawings including

architecutral details. A qualified professional for the purpose shall

be appointed after due appproval from Engineer In Charge.

Design of complete civil structure and preparation of complete

5 MR set of structural drawings as per the latest building codes and Nos 1.00 2,10,000.00 2,10,000.00

engineering practices including structural design calculation, if

required complete to the satisfaction of engineer-in-chage. A

qualified professional for the purpose shall be appointed after due

appproval from Engineer In Charge

Steel work welded in built up sections/ framed work, including

6 10.25 cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Providing and fixing hand rail of approved size by welding etc. to

7 10.26 steel ladder railing, balcony railing, staircase railing and similar

works, including applying priming coat of approved steel primer.

TOTAL OF FINISHES & MISCELLANEOUS 3,09,094.75 2,10,000.00

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

SUMMARY OF WORKS

Sr. No. Item DSR Amount NDSR Amount

A SANITARY FIXTURES 24,804.60 66,730.95

C WATER SUPPLY 2,37,062.05 0.00

SR. NO. DSR REF. NO. ITEM UNIT QUANTITY DSR RATE DSR AMOUNT NSDR RATE NDSR AMOUNT

A SANITARY FIXTURES

Providing and fixing white vitreous china extended

wall mounting water closet of size 780x370x690 mm of

approved shape including providing & fixing white

1 17.78 vitreous china cistern with dual flush fitting, of flushing Each 1.00 14,999.15 14,999.15

capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),

including seat cover, and cistern fittings, nuts, bolts

and gasket etc complete.

Supply, installation, testing and commissioning of

glazed vitreous china under counter wash basin with

R.S. or C.I. brackets painted white, 32mm C.P. brass

2 MR - 01 waste of standard pattern , C.P brass wall flange 32 Each 1.00 11,952.68 11,952.68

mm dia. C.P. brass bottle trap and union 32 mm dia

C.P. pipes to wall flange. complete including cutting

and making good the walls wherever required.

3 17.34 Providing and fixing toilet paper holder :

Providing and fixing 600x450 mm beveled edge mirror

of superior glass (of approved quality) complete with 6

mm thick hard board ground fixed to wooden cleats

with C.P. brass screws and washers complete.

Digitally signed by AMIT

Providing and fixing 8 mm dia C.P. / S.S. Jet with

flexible tube upto 1 metre long with S.S. triangular

plate to Eureopean type W.C. of quality and make as

approved by Engineer - in - charge.

Providing & fixing 15 mm dia C.P. brass bib cock with

C.P. wall flange of approved quality.

Providing and fixing CP Brass Single lever telephonic

7 1722B wall mixer of quality

& make as approved by Engineer in charge.

(a) 15 mm nominal dia Each 1.00 6,940.75 6,940.75

Providing and fixing P.V.C. waste pipe for sink or wash

basin including P.V.C. waste fittings complete.

17.28.1 Semi rigid pipe

Providing & fixing, testing and commissioning of

storage type electric water heater with automatic

thermostatic control electric element, pressure release

valve, brackets fixed to expansion fasteners with M.S.

nuts and bolts all complete including cutting and

making good the walls wherever required.

15 litres capacity (Horizontal /Vertical type1.5 kw

electrical load).

25 litres capacity (Horizontal /Vertical type1.5 kw

electrical load).

Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary

fixtures shall be selected by Architect/Interior

designer/Project manager and the same shall be

binding for execution.

No additional fixing cost shall be paid for change in

type of sanitary fixtures.

Contractor to receive all the above mentioned items

& store at place as directed at site.

Providing & fixing PTMT grating of approved quality

18.58.1 Circular type 0.00 0.00

2 17.35 Providing and fixing soil, waste and vent pipes : Digitally signed by AMIT

17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 metre 10.00 1,151.90 11,519.00

2.2 17.35.2 75 mm diameter :

17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 metre 30.00 1,044.75 31,342.50

Providing and fixing M.S. holder-bat clamps of

approved design to Sand Cast iron/cast iron (spun)

pipe embedded in and including cement concrete

3 17.37 blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size),

including cost of cutting holes and making good the

Providing and fixing bend of required degree with

4 17.38 access door, insertion rubber washer 3 mm thick, bolts

and nuts complete.

17.38.1.1 Sand cast iron S&S as per IS - 1729 each 6.00 598.50 3,591.00

17.38.2.1 Sand cast iron S&S as per IS - 1729 each 6.00 501.45 3,008.70

Providing and fixing plain bend of required degree.

17.39.1.1 Sand cast iron S&S as per IS - 1729 each 6.00 470.45 2,822.70

17.39.2.1 Sand cast iron S&S as per IS - 1729 each 6.00 376.25 2,257.50

Providing lead caulked joints to sand cast

6 17.58 iron/centrifugally cast (spun) iron pipes and fittings of

Painting sand cast iron/ centrifugally cast (spun) iron

soil, waste vent pipes and fittings with two coats of

7 17.65 synthetic enamel paint of any colour such as

chocolate grey, or buff etc. over a coat of primer (of

approved quality) for new work :

7.1 17.65.1 100 mm diameter pipe metre 10.00 82.80 828.00

Digitally signed by AMIT

Making khurras 45x45 cm with average minimum

thickness of 5 cm cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate of 20 mm

nominal size) over P.V.C. sheet 1 m x1 m x 400 micron,

finished with 12 mm cement plaster 1:3 (1 cement : 3

coarse sand) and a coat of neat cement, rounding

the edges and making and finishing the outlet

Cutting holes up to 15x15 cm in R.C.C. floors and roofs

for passing drain pipe etc. and repairing the hole after

insertion of drain pipe etc. with cement concrete 1:2:4

9 18.77 (1 cement : 2 coarse sand : 4 graded stone aggregate Each 6.00 452.00 2,712.00 0.00 0.00

20 mm nominal size), including finishing complete so

as to make it leak proof.

Providing and fixing on wall face unplasticised Rigid

PVC rain water pipes conforming to IS : 13592 Type A,

10 12.41 including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion, (i) Single

socketed pipes.

Providing and fixing to the inlet mouth of rain water

11 12.44 pipe cast iron grating 15 cm diameter and weighing each 6.00 54.70 328.20

not less than 440 grams.

SITC of grease trap including all the fittings and

12 MR accessories complete in all respects as per drawings NOS 1.00 10,030.00 10,030.00

and instructions of engineer-in-charge.

Constructing brick masonry manhole in cement mortar

1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab

with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) :

3 graded stone aggregate 20 mm nominal size),

foundation concrete 1:4:8 mix (1 cement : 4 coarse

sand (zone-III) : 8 graded stone aggregate 40 mm

13 19.7 nominal size), inside plastering 12 mm thick with

cement mortar 1:3 (1 cement : 3 coarse sand) finished

with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm

nominal size) finished with a floating coat of neat

cement complete as per standard design :

Inside size 120x90 cm and 90 cm deep including C.I.

cover with frame (heavy duty) 560 mm internal

19.7.3 diameter, total weight of cover and frame to be not

less than 208 kg (weight of cover 108 kg and weight of

frame 100 kg) :

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

Digitally signed by AMIT

Making connection of drain or sewer line with existing

manhole including breaking into and making good

the walls, floors with cement concrete 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size) cement plastered on both sides with

cement mortar 1:3 (1 cement : 3 coarse sand), finished

with a floating coat of neat cement and making

necessary channels for the drain etc. complete :

19.21.3 For pipes 350 to 450 mm diameter EACH 1.00 1,328.45 1,328.45

Constructing brick masonry road gully chamber

45x45x77.5 cm with bricks in cement mortar 1:4 (1

cement : 4 coarse sand ) with precast R.C.C. vertical

grating complete as per standard design :\

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

Providing and laying Non Pressure NP-3 class (Medium

duty) R.C.C. pipes including collars/spigot jointed with

16 19.35 stiff mixture of cement mortar in the proportion of 1:2

(1 cement : 2 fine sand) including testing of joints etc.

C WATER SUPPLY

Providing and fixing Chlorinate Polyvinyl Chloride

(CPVC) pipes having thermal stability for hot & cold

water supply including all CPVC plain & brass

threaded fittings i/c fixing the pipe with clamps at 1.00

1 18.8 m spacing. This including jointing of pipes & fittings 0.00 0.00

with one step CPVC solvent cement and the cost of

cutting chases and making good the the same

including testing of joints complete as per direction of

engineer in charge.

Concealed work including cutting chases and making

good the walls etc.

1.1 18.8.1 15 mm nominal outer dia Pipes RM 40.00 497.80 19,912.00 0.00

1.2 18.8.2 20 mm nominal outer dia Pipes RM 40.00 537.60 21,504.00 0.00

1.3 18.8.3 25 mm nominal outer dia Pipes RM 40.00 627.25 25,090.00 0.00

Digitally signed by AMIT

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply including all CPVC plain & brass

threaded fittings This includes jointing of pipes & fittings

with one step CPVC solvent cement, trenching, refilling

& testing of joints complete as per direction of

Engineer in Charge.

HOT WATER 0.00

Providing and fixing G.I. pipes complete with G.I.

3 18.10 fittings and clamps, i/c cutting and making good the 0.00

Providing & fixing ball valve ( brass) of approved

4 18.18 quality,High or low pressure, with plastic floats 0.00

Providing and fixing gun metal gate valve with C.I.

wheel of approved quality (screwed end) :

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701 marked,

6 18.48 with cover and suitable locking arrangement and Per Litre 5,000.00 11.00 55,000.00 0.00

making necessary holes for inlet, outlet and overflow

pipes but without fittings and the base support for tank.

Providing and fixing rectangular high density

polyethylene water storage loft tank with cover,

conforming to ISI : 12701, colour of opaque white or as

7 18.48A approved by Engineer-in-charge. The rate includes Per Litre 500.00 11.00 5,500.00 0.00

making necessary holes for inlet, outlet & over flow

pipes. The base support Including fittings & fixtures for

tank shall be paid separately.

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

BOQ FOR KITCHEN EQUIPMENTS

SR. NO. ITEM SIZE UNIT QUANTITY RATE AMOUNT

Design, fabrication, supply, installation, testing and commisioning

of following commercial kitchen equipments complete in all

respects including all nesseccary fixing equipments, fittings,

accessories etc.

NOTE: The sizes mentioned against the relevant subhead may

vary by 10% depending upon the site conditions.

GENERAL SPECIFICATIONS

All frame works will be of rustproof M.S angle of size 38x38x4mm &

All vertical legs will be of 38mm square 1.5mm S.S tube with

adjustable feet. Cross bracing of over shelves vertical of 25mm

TOP & SINK BOWL

All top & sink bowl will be of SS 304 grade 1.5mm.

UNDER & OVER SHELF

Will be of 1.2mm SS 304 grade s.s sheet.

Will be of 1.0mm SS 304 grade s.s sheet.

Inner of refrigerator will be of 0.7/0.8 mm & outer 0.8/0.9mm s.s

1.0mm thick 202 low nickle grade s.s sheet with removable type

baffle filter grade cup & light mounting bracket.

Digitally signed by AMIT

All top of 1.5mm s.s sheet removable type cast iron pan supports

All burner with individual control valves pilot lamps etc.

Gridlle /chappati/dosa plate top 12mm thick m.s plate.

INSULATION MATERIAL

Puf for refrigerator equipment & non sag glass wool for other

insulated product.

A DISHWASH AREA

1 DISH LANDING TABLE WITH GARBAGE CHUTE 2700X600X850+150 nos 1.00 1,02,500.00 1,02,500.00

3 PRE RINSE UNIT STD nos 1.00 1,22,500.00 1,22,500.00

4 CONVERYOR DISHWASHER nos 1.00 32,50,000.00 32,50,000.00

5 CLEAN DISH TABLE WITH 2 UNDER SHELF 1650X900X850+150 nos 1.00 80,000.00 80,000.00

3 POTATO PEELER 10 KG PER HR CHARGE nos 1.00 1,12,500.00 1,12,500.00

4 WORKING TABLE WITH SINK UNIT 1200X600X850+150 nos 1.00 65,000.00 65,000.00

5 WORKING TABLE WITH 2 UNDER SHELF 1100X600X850+150 nos 1.00 57,500.00 57,500.00

6 VEG CUTTING MACHINE nos 1.00 2,37,500.00 2,37,500.00

7 WORKING TABLE WITH SINK UNIT 1800X600X850+150 nos 1.00 80,000.00 80,000.00

D MAIN KITCHEN

1 TANDOOR SUPPORT TABLE 600X750X850+150 NOS 2.00 27,500.00 55,000.00

5 LOW HT BURNER RANGE 600X750X600 NOS 4.00 47,500.00 1,90,000.00

Digitally signed by AMIT

8 TWO BURNER INDIAN RANGE 1100X750X850+150 NOS 1.00 57,500.00 57,500.00

9 WORKING TABLE WITH 2 UNDER SHELF 600X750X850+150 NOS 1.00 23,750.00 23,750.00

10 2 DOOR UNDERR COUNTER CHILLER 1500X600X850 NOS 3.00 1,75,000.00 5,25,000.00

11 WORKING TABLE WITH 2 UNDER SHELF 1500X600X850 NOS 3.00 55,000.00 1,65,000.00

E CHAPATI SECTION

2 CHAPATI ROLLING TABLE WITH 2 UNDERR SHELF 1100X750X850+150 NOS 1.00 52,500.00 52,500.00

3 CHAPATI TABLE WITH PUFFER 1200X750X850+150 NOS 1.00 82,500.00 82,500.00

4 CHAPATI COLLECTION TABLE 450X750X850 NOS 1.00 30,000.00 30,000.00

5 WORKING TABLE WITH 2 UNDER SHELF 450X750X850+150 NOS 1.00 22,500.00 22,500.00

6 CHAPATI MAKING MACHINE NOS 1.00 1,37,500.00 1,37,500.00

7 CHAPATI COLLECTION TABLE 450X750X850 NOS 1.00 22,500.00 22,500.00

F S.S. EXHAUST HOOD

DOUBLE SKIN S.S. EXHAUST HOOD WITH LED LIGHT AND FILTER OF

WIDTH UPTO 1000MM AND HEIGHT UPTO 600MM.

G GAS DISTRIBUTION PIPELINE

PROVIDING AND FIXING OF COMPLETE GAS DISTRIBUTION PIPELINE

AS PER THE IS CODES AND OTHER RELEVANT ENGINEERING CODES

INCLUDING PROVISION OF VALVE AT ALL EQUIPMENT LOCATIONS

COMPLETE AS PER THE KITCHEN LAYOUT TO PROVIDE GAS SUPPLY

TO ALL THE UNITS. THE GASLINE TO BE EXPOSED AND PAINTED AS

PER THE SAFTY STANDARDS.

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

BOQ FOR FIRE SUPPRESSION SYSTEM

SR. NO. ITEM UNIT QUANTITY RATE DSR AMOUNT NDSR AMOUNT

NOTE: Complete fire suppression system to be integrated with fire alarm

Supply & Installation of Automatic wet chemical kitchen hood

suppression system designed as per UL 300, UL/ULC listed & CE

1 Mechanical Reg. Release, R-102 with 3.0 Gallon. Tank Assembly filled LOT 1.00 3,10,126.80 3,10,126.80

with LPH Ansulex 3 Gallon and fitted with LT-30R Nitrogen Cartridge with

3PDT switch (it is including piping, valve etc., complete in all respect)

Supply & Installation of Nozzles for appliance, plenum and duct

protection with swivel adaptors, 3/8" & 1/2" pipe seal adaptors

Supply & Installation of Detection line with ss wire rope having fusible

3 links mounted within series and terminal detectors, pulley elbows for NOS 1.00 78,064.00 78,064.00

change of direction

Supply & Installation of Manual Pull station for manual operation with

Supply & Installation of Mechanical gas shut valve with accessories for

5 shutting the gas supply including required pipes etc, complete in all NOS 1.00 67,436.00 67,436.00

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

BOQ FOR VENTILATION SYSTEM

S. no. DSR REF. NO. Description Unit Quantity Rate DSR AMOUNT

36.1 EVAPORATIVE COOLING

Supplying, Installation, Testing and Commissioning of factory assembled double

skin central evaporative cooling plant having following specifications

A. Air washer section comprising 50 mm thick pre-air filter made out from

washable Aluminium wire mesh filter with 90 % down to 10 microns.

B. Humidification section comprising of Wet pads 200 mm thick impregnated

cellulose paper media (Celdec pads) with two (2) bend PVC eliminator,

internal casing with blank off's of wet section In SS-304 construction.

C. Fan Section comprising of belt driven, Double Inlet Double Width (DIDW)

backward curved fan with outlet velocity less than or equal to 10 m/s and

minimum efficiency of 70% Air Movement & Control Association International

(AMCA) certified centrifugal fan suitable for required cfm at 50 mm WC static

D. Totally Enclosed Fan Cooled (TEFC) motor of IE-3 class as required with pulley,

E. The unit shall be fabricated with frame work hollow extruded aluminium

profile with 0.80 mm precoated GSS on outside and on inside complete with 25

mm thick Chloroflouro Carbon (CFC) free Polyurthane Frame (PUF) insulation of

minimum 40 kg/cum density sandwiched in between inner and outer skins, SS -

304 (18 SWG) Sump tank, 25mm C-PVC piping, make up, drain & quick fill and

drain connection, Butterfly/Gate valves for pumps, make up, drain & quick fill

and drain connections of sump, 2 no. Pumps of suitable capacity and

necessary fittings, stand, anti vibration pads etc.as required.

F. Starter panel DOL/Star-Delta suitable for operation of Blower motor & pump

made out of 1.6 mm thick sheet steel powder coated enclosure comprising of

over load protection relay, short circuit & single phasing protection, ON / OFF

push buttons, ammeter, voltmeter, indicating lamps, MCB, contactor etc. (As

per Specification of CPWD & direction of Engineer- in-charge) complete in all

G. All as per pre approved by Engineer-in-charge.

2 MR SCRUBBER

ELECTROSTATIC PRECIPITATOR FOR DRY TYPE AIR SCRUBBER

Digitally signed by AMIT

Supply, Installation, Testing and Commissioning of

ESP for dry type scrubber (packaged type)

comprising of following as per the specifications:

a. The Electrostatic section shall be 90-95% in single pass as

per DOP test method. Electrostatic Precipitator should be

able to charge particles from 0.01 micron to 10 micron

through solid state power supply. Collector cell shall be of

permanent type and slide out facility for easy removal for

cleaning. Operating voltage shall be 220+6 % volts,50 Hz/

1Ph, power consumption shall not exceeding 50 watts per

unit upto 7500 Cfm. System should be fitted with interlock

switch for safety. Velocity across the air cleaner shall not

be more than 500 FPM. Scrubber shall be provided

with pre-filters as required.

ESPs shall be provided with UV & Ozone Odours removers.

b. ESP Modules shall have necessary provision in terms of

flanges to facilitate Ducts/Plenum connections as per

approved shop drawings.

c. In addition to the above, ESP shall be

provided with adequate vibration isolation pads

and fire retardent flexible canvass connections made

out of canvass sleeve.

ESP for Dry Scrubber Machines shall be of following

duty parameters :

(Actual motor rating shall be as per approved technical submittal/ fan selecion

DUCTING FOR KITCHEN EXHAUST

Supplying, installation, balancing and commissioning of factory fabricated GSS

sheet metal rectangular/ round ducting complete with neoprene rubber

gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions,

reducers, end caps, collars etc as required complete in all respect in

confirmation to IS : 655 and approved drawings and specifications of following

sheet thickness complete as required.

Digitally signed by AMIT

Supply, fabrication, Installation and testing of MS ducting for kitchen exhaust

contructed out of 2mm thick MS sheet using welded joints & MS angle iron

4 MR flanges in line with good engineering practice. Entire ducting shall be applied SqM 160.00 3,500.00 5,60,000.00

with minimum two coats of red oxide primer. Duct shall be provided with oil

trap as required

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the

outlet of air handling units/ductable split units//inline fans. Flexible connections

shall be constructed using imported fire retardant fabric with extruded

aluminium frame/flange on both sides of approved make.

Supplying, Fixing, installation, testing and commissioning of powder coated

extruded aluminium Supply Air Grills with aluminium volume control dampers in

confirmation to SMACNA/IS and as per specifications complete etc. as

Supplying & fixing of powder coated extruded aluminium Return Air Grills with

7 30.16 louvers but without volume control dampers complete in confirmation to SQM 15.00 6,285.00 94,275.00

SMACNA/IS and as per specifications complete etc. as required.

Supply, Installation and Testing of Bird Screens with GI wire mesh to be

installed at the suction of fresh air/discharge of Exhaust air as per the

specifications and shop drawings. Sample of bird screen to be got approved

from consultants and Clients prior to procurement.

Supplying, installation, testing and commissioning of GI volume control duct

damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages,

flanges etc in confirmation to SMACNA/IS and as per specifications complete

etc. as required.

Supplying and fixing 50 mm thick aluminium foil faced resin bonded fibre glass

insulation (on duct ) of density 24 kg/cu.m or mineral wool insulation(non

combustible) of density 44 kg/cu m after applying two coats of cold setting

10 30.24 adhesive (CPRX compound) sealing all joints with self adhesive aluminium tape SQM 50.00 548.00 27,400.00

& covering with 0.63mmx19mm GI wire mesh netting butting all joints and laced

with GI wire complete as per specifications and as required. (for indoor

Supplying and fixing Installation, Testing and commissioning of 50mm thick

aluminium foil faced resin bonded fibre glass insulation (on duct) of density 24

kg/cu.m or mineral wool insulation(non combustible) of density 44 kg/cu m

after applying two coats of cold setting adhesive (CPRX compound) sealing all

joints with self adhesive aluminium tape & covering with 0.63mmx19mm GI wire

mesh netting & butting all joints and laced with GI wire complete and finally

covered with one layer of tar felt stuck with hot bitumen as per specifications

and as required. (for outdoor applications)

Digitally signed by AMIT

Supply and Application of 50mm thick TF quality expanded polystyrene (EPS)

insulation for exposed ducts insulation. Quoted price shall be inclusive of Low

VOC adhesive as required and as per the specifications. Density of insulation

shall not be less than 24Kg/CuM. Insulation shall be covered necessary glass

cloth & UV protection paint.

(For Air Washer)

Fire rated coating compound STARCOAT CRC /magik CRC/ Foster/3M to be

provided over duct. Fire rated coating compound used for construction of fire

rated ductwork shall be protected with minimum 0.7mm to 1mm nominal

thickness tested to properties as per the requirements of BS 476: 6 & 7, including

non-combustibility Class O and fire propagation - Class 1 surface spread of

flame & materials in accordance with building regulations for the

determination of BS 476 Part 24 (Test Certificate required from CBRI or BS

Certified Lab).

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

BILL OF QUANTITIES (BOQ)

SUB HEAD NDSR AMOUNT (Rs.) DSR AMOUNT (Rs.)

1 MAIN PANEL & DISTRIBUTION BOARD Rs. 2,51,223.00 Rs. 90,346.00

4 LIGHTING FIXTURES & FANS Rs. 1,35,111.42 Rs. 36,980.00

5 CABLE TRAY Rs. - Rs. 47,880.00

4 FIRE DETECTION Rs. - Rs. 5,43,699.00

GRAND TOTAL Rs. 18,71,049.42

GRAND TOTAL Rs. 18,71,049.42

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

A MAIN PANEL & DISTRIBUTION BOARD

Supply,installation,testing and commissing of 3phase and neutral 415V 4 wire

free standing floor mounted indoor MV panel made out of 14 SWG sheet after

seven tank process and painting with epoxy powder coating MV electrical

panel shall be dust and vermin proof ,hinged and locable doors.The panel shall

consist of suitable rating TPN bus bar at the rating of 0.8A /SQMM Supported by

1 DMC/SMC insulator and color coded with heat shrinkable sleeves. Metering shall

be provided as specified .The panel shall have short circuiting with standing

capacity of minimum 36KA and consist of the switch gear as mentioned below

.The panel shall got fabricated from manufacturer with CPRI test certificate .The

panel shall be mounted on U channel including supply and fixing of the

same.(including Capacitor banks)

− 200 Amps 4P MCCB On Load change over switch. -1No.

− Spreaders-1Set.

− Extended Rotary Operating Mechanism.-1Set

Digital VA F Meter with built in Selector Switch, CTs, CT shorting links, R/Y/B LED

indicating lamps and control SP MCBs.

− ELR, CBCT, VIF, SPD

Outgoing Section

− 8 Step Automatic Power Factor Correction Relay (Digital)_1 No

− 63 Amps FP MCCB stater panel for scrubber

− 63 Amps FP MCCB stater panel for air washer

− 63 Amps FP MCB_C curve -4Nos.

− 32 Amps 4P MCB -2Nos.

− 25 Amps 4P MCB -2Nos.

− 10 kVAR capacitor duty Contactor with 220 V AC Coil_3 Nos

− 5 kVAR capacitor duty Contactor with 220 V AC Coil_4 Nos

− ON / OFF LED Indicating Lamps _7Set

− Start / Stop Push Buttons_7Set

− A/M Selector Switch_1 No

− Control S/P MCB (2/4 A)_7 Nos

− Neutral Links_7 Nos

− Control Blocks_7 Nos

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

Enclosure, 250A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100%

− neutal& Non adhesive PVC insulated heat shrinkable sleeves, Internal Wiring, SET 1.00 2,38,783.00 2,38,783.00

Terminals, etc.as required._1Set

Supplying and fixing of following ways surface/ recess mounting, vertical type,

415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder

painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth

2 2.5 bar, din bar for mounting MCBs (but without MCBs and incomer ) as required.

(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve,

miniature circuit breaker suitable for inductive load of following poles in the

existing MCB DB complete with onnections, testing and commissioning etc. as

Supplying and fixing following rating, double pole, (single phase and neutral),

240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA

in the existing MCB DB complete with connections, testing and commissioning

etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing

5 2.13 MCB DB complete with connections, testing and commissioning etc. as

Supplying and fixing 63 A, 415 V, TPN Industrial type socket outlet, with MCB and

4 pole and earth, metal enclosed plug top along with 30 A "C" curve, TPMCB, in

6 MR sheet steel enclosure, on surface or in recess, with chained metal cover for the Each 2.00 6,220.00 12,440.00

socket out let and complete with connections, testing and commissioning etc.

Supplying Installation, Testing and Commissioning of following capacity TPN tap

off box made of 1.6mm thick sheet steel enclosure duly painted with powder

coating on existing rising mains complete with TPN disconnector FSU and HRC

fuses, connections, earthing etc. as required.

Supplying Installation, Testing and Commissioning of 63A TPN MCCB in

8 MR weatherproof enclosure duly painted with powder coating with all fuses, each 2.00 16,500.00

connections, earthing etc. as required. 33,000.00

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

TOTAL OF MAIN PANEL & DISTRIBUTION BOARD 2,51,223.00 90,346.00

C CABELS / MAINS

Supply ,laying,testing and commissoning of 1100V grade armoured cable

having sector / circular shaped aluminium / copper conductor PVC insulated

cores under ground PVC tape wrapped inner sheathed, GI strip / wire

armoured and overall extruded PVC sheathed confirming to IS: 1554, laid on

wall or ceiling using GI clamps and spacers as per route shown at site and

further as directed by Engineer-in charge

1.1 MR 120 Sq.mm 3 1/2 core Aluminium cable mtr. 100.00 2,833.00 2,83,300.00

1.2 MR 35 Sq.mm 3 1/2 core Aluminium cable mtr. 10.00 686.00 6,860.00

1.3 MR 25 Sq.mm 4 core copper cable mtr. 200.00 612.00 1,22,400.00

1.4 MR 16 Sq.mm 4 core copper cable mtr. 10.00 503.00 5,030.00

1.5 MR 4 Sq.mm 3 core Copper cable mtr. 10.00 260.00 2,600.00

Supply & fixing of end termination for above mentioned cables including

2 compressed type brass glands, crimping type coper lugs, insulation tape etc. as

'required complete with earthing of glands in following sizes

Total of Cables / Mains carried over to summary 4,23,148.00 7,444.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of

1100 V grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded

copper wires, in & including 25 mm dia , MS conduit surface/ concealed in wall

1 / ceiling conferming to IS 732 including all accessries such as junction boxes ,

conduit bends, elbows and ceiling rose , and anodised GI switch box with

modular switch ,modular plate and the box covered with front plate

1.1 1.3.3 One light point controlled by one 6A switch Per Pts 20.00 1,845.00 36,900.00

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

Secondary light point controlled by same switch

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

1.3 1.7 FRLS PVC insulated copper conductor, single core cable in surface/ recessed

steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Per

2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per

1.7 1.3.3 Exhaust fan point including of ceiling rose near fan. Per Pts 4.00 1,845.00 7,380.00

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC

insulated copper conductor cable drawn through 25 dia MS conduit laid in

2 1.4 surface/concealed over false ceiling or in slab/wall chases including ,2way Per Pts 4.00 1,981.00 7,924.00

modular switches,modular plate ,suitable GI box and earthing the point with 1.5

sqm FRLS PVC insulated copper conductor single core cable as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

3 1.14 FRLS PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular

4 1.24 plate & switch box including connections but excluding modular plate etc. as

Supplying and fixing following size/ modules, GI box alongwith modular base &

cover plate for modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular

metal boxes etc. as required.

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole

and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet

7 2.18 steel enclosure, on surface or in recess, with chained metal cover for the socket Each 10.00 1,806.00 18,060.00

out let and complete with connections, testing and commissioning etc. as

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole

and earth, metal enclosed plug top along with 30 A "C" curve, TPMCB, in sheet

8 2.20 steel enclosure, on surface or in recess, with chained metal cover for the socket Each 4.00 4,358.00 17,432.00

out let and complete with connections, testing and commissioning etc. as

Supply and fixing of following sizes of MS conduit along with accessories in

surface /recess including painting in case of surface conduit,or cutting the wall

and making good the same in case of recessed conduit as required

TOTAL OF WIRING 0.00 3,35,218.00

D LIGHTING FIXTURES & FANS

1 8.11 LED Batten light (System lumen efficacy >135 Lm/Watt)

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

Supplying, installation, Testing & Commissioning of LED surface mounted Batten

light of following body material and construction as per IS : 10322 with driver

(Replaceable) as per the requirement with Driver efficiency >85% ,Operating

voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40

0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD

< 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time

(LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of

initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As

per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power

consumption should not more than the specified rating and Fixture shall be of

relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/

Screen printing on housing complete in all respect i/c external connections with

1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required with Minimum 5 year OEM warranty. System lumen

efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required

for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as

approved by Engineer-in-Charge as per requirement. (Thermal management:

heat sink of aluminium housing such that LED junction temperature shall not rise

Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete with all

hardware and connectors etc., as per the direction of the engineer In charge

3 8.8 LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt)

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following

body material and construction as per IS : 10322 with driver as per the

requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,

frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge

protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95,

IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be

below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning

Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K /

5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching)

<3, Maximum power consumption should not more than the specified rating

and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name

Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c

external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper

conductor single core cable and earthing etc. as required with Minimum 5 year

OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test

report and all testing required for LED fixtures as per BIS shall be submitted.

Shape size and CCT shall be as approved by Engineer-in- Charge as per

requirement. (Thermal management: heat sink of aluminium housing such that

LED junction temperature shall not rise above 90°C).

Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

4 9.1 Brush Less Direct Current (BLDC) Fan with Remote

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less

Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy)

blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper

winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W)

minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic

Distortion) less than 10%, remote (preferably mobile app based) for speed

control and all remaining accessories including safety pin, nut bolts, washers,

temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm,

suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS

374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated

copper conductor single core cable and earthing etc. as required.

Digitally signed by AMIT

CONSTRUCTION OF KITCHEN BLOCK AT IIPA HOSTEL, NEW DELHI

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

9.1.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Each 10.00 2,882.00 28,820.00

TOTAL LIGHTING FIXTURES & FANS 1,35,111.42 36,980.00

Supply, fabrication and fixing of steel frame work in position for cable

tray/Panels fabricated out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50

channels, flats etc.complete with providing of Anchor fastners and all necessary

3 hardwares as required for fixing, including cutting, bending, welding, drilling,

bolting etc. as per design as required and painted with one coat of primer and

two coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable

tray of following sizes complete with bend/tee joints, coupling plate & nuts bolts

etc. as required for fixing and including the cost of providing loop earthing with

2 nos. 50 mm x 6 mm GI earth strips complete as per specifications, as required

TOTAL TOTAL LIGHTING FIXTURES & FANS 0.00 47,880.00

Digitally signed by AMIT

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

Sr. No DSR No. Description Unit Qty Unit Rate Total amount Total amount

Sr. No DSR No. Description Unit Qty Unit Rate Total amount Total amount

1 28.2 INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing and commissioning of micro processor based

intelligent addressable main fire alarm panel, central processing unit with the

following loop modules and capable of supporting not less than 240 devices

(including detectors) and minimum 120 detectors per loop and loop length

up to 2 km, network communication card, minimum 320 character graphics/

LCD display with touch screen or other keypad and minimum 4000 events

history log in the non volatile memory (EPROM), power supply unit (230 ± 5 %

V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with

automatic charger. The panel shall have facility to connect printer to

printout log and facility to have seamless integration with analog/digital

voice evacuation system (which is part of the schedule of work under SH: PA

System) and shall be complete with all accessories . The panel shall be

compatible for IBMS system with open protocol BACnet/ Modbus over IP

complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog

2 28.2.4 addressable photothermal detector complete with mounting base complete Each 6.00 3,004.00 18,024.00

Supplying, installation, testing & commissioning of response indicator on

6 28.2.5 surface/recessed MS Box having two LED, metallic cover complete with all Each 2.00 306.00 612.00

connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete with

base as required.

Supplying, installation, testing & commissioning of addressable manual call

point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum

strobe complete as required.

B CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V

1 28.5.2 rated with annealed copper conductor having XLPE insulation, steel wire RM 40.00 192.00 7,680.00

armouring & FRLS/HFFR outer sheath complete as required.

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Digitally signed by AMIT

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

Sr. No DSR No. Description Unit Qty Unit Rate Total amount Total amount

Sr. No DSR No. Description Unit Qty Unit Rate Total amount Total amount

Supplying, installation, testing & commissioning of 6 zone, voice alarm

controller with USB, MP4 player (including 6 zone button paging station) with

seamless integration facility with main fire alarm panel for voice evacuation

complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker

complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50

Watt, 25V rms operating at 240 volt AC supply complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated copper

conductor cable in the existing surface / recessed steel conduit of following

pairs, cores and size including connections and interconnections etc. as

28.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 40.00 61.00 2,440.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with

all ancillaries and accessories like coupler etc. as required.

Digitally signed by AMIT