WBPWD/EE/PMED/NIQ-17/e-T /2019-2020

Amount

Supplying and fixing of 415V, 415A TPN SFU in Sheet steel encloser on angle iron frame on wall incl. 3nos HRC din type fuse as per rating with 2nos. Cable end box. Make- L&T/ Schneider/ Siemens.

Supplying and fixing of 415V, 160A TPN SFU in Sheet steel encloser on angle iron frame on wall incl. 3nos HRC din type fuse as per rating with 2nos. Cable end box. Make- L&T/ Schneider/ Siemens.

S & Laying of following size cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and storing surface duly rammed. (Make- Polycab/ Havells/ Glowster/ Currency)

a) 4 core 240 sqmm 1.1Kv grade XLPE insulated Al/A cable from Substation to Piller Box)

b) 4 core 185 sqmm 1.1Kv grade XLPE insulated Al/A cable.

c) 4 core 150 sqmm 1.1Kv grade XLPE insulated Al/A cable.

d) 4 core 70 sqmm 1.1Kv grade XLPE insulated Al/A cable.

e) 4 core 16 sqmm 1.1Kv grade XLPE insulated Al/A cable.

f) 2 core 10 sqmm 1.1Kv grade XLPE insulated Al/A cable.

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

a) 4 core 240 sqmm 1.1Kv grade XLPE insulated Al/A cable from Substation to Piller Box)

b) 4 core 185 sqmm 1.1Kv grade XLPE insulated Al/A cable.

c) 4 core 150 sqmm 1.1Kv grade XLPE insulated Al/A cable.

d) 4 core 70 sqmm 1.1Kv grade XLPE insulated Al/A cable.

e) 4 core 16 sqmm 1.1Kv grade XLPE insulated Al/A cable.

f) 2 core 10 sqmm 1.1Kv grade XLPE insulated Al/A cable.

Supply & Errection of uitable size out door type both side opening sheet steel piller Box of 3.15mm thick CRCA sheet with trapizium top cover (5mm thick) with ventilation arrangement with both side door arangement hinged type,with mechanical locking arrangement & in built handle pcc & brick foundation of 20 " with plaster with neat cement finish etc.with central hollow with filling of fine sand. at a height of 2.5 ft from G.L.& below 1.5 ft on pcc (4" thickness)on sand filling (6" thickness) Piller box should have 2( two ) coat of synthetic enamel paint powder coated over RO Primer with mechanical locking arrangement ,with pad lock arrangement also incl providing of Godrej brass make /weather proof Lock & key (3 no key) with it incl. 2 no eath terminal on it.The pillar box should be two part type (front & back side opening) with comprising of the following :- INCOMER:- a) S& fixing 415V, 415A TPN SFU in sheet steel encloser with 3nos. HRC din type fuse. [ Make : L&T/ Schneider/ Siemens]------1 no. BUSBAR: S & F of 415V, 600A, 4x2x40x5mm. copper bar as BBC in 16 SWG M,S sheet enclosure as per GS ---1 set. OUTGOING: a) S& fixing 415V, 250A TPN SFU in sheet steel encloser with 3nos. HRC din type fuse. [Make : L&T/ Schneider/ Siemens]------2 nos. b) S& fixing 415V, 125A TPN SFU in sheet steel encloser with 3nos. HRC din type fuse. [Make : L&T/ Schneider/ Siemens]------2 nos. c) S& fixing 415V, 63A TPN SFU in sheet steel encloser with 3nos. HRC din type fuse. [Make : L&T/ Schneider/ Siemens]------2 nos.

d) S & Fixing of MS box with hing type front door and threaded locking arrangement in one side made of 16 SWG CRCA MS sheet of suitable size fixed in MS flat iron frame on wall as per direction of EIC. The box should comprising following accessories. i) S & F single dial 24 hrs. Analog timer (Make- L&T, AUTS01ANA00)---- 1 No. ii S & F 40Amp capacity TP Power Contactor. (Make- L&T(MNX40)) ----- 1 No. iii) S & F of 415V, 40A, FP MCB type Change over. (Make- L&T/ Legrand)(for bypass arrangement) ---- 1no. iv) S & F of 415V, 40A, FP MCB. (Make- L&T/ Legrand)(for I/C) ---- 1no. v) S & F of LED type indication (For on/off)(Make- L&T/ ABB)--- 2no. vi) S & F 4 way MS stude (bolt type) bakelite molded terminal with spring washer or nuts as required.(for I/C & O/G)--- 2 Nos. The complete arrangement timer db must be wiring by PVC insulated suitable 16sqmm copper wire for power wiring and 1.5 sq mm. for control wiring and also copper socketing the all copper wire end portion. e) Inter connectiion between SFU (upto 100A) and busbar by suitable grade of cupper stranded wire with necessary cupper socketing through cable entry box. and inter connection between switches (above 100A) and busber by suitable size of Cu. busbar through cable entry box. R,Y,B LED type indication incl. 3nos fuse with necessary connection by 1.5 sq mm standared cu wire. two nos. 415 V Danger plate.

Supply & Errection of uitable size out door type both side opening sheet steel piller Box of 3.15mm thick CRCA sheet with trapizium top cover (5mm thick) with ventilation arrangement with both side door arangement hinged type,with mechanical locking arrangement & in built handle pcc & brick foundation of 20 " with plaster with neat cement finish etc.with central hollow with filling of fine sand. at a height of 2.5 ft from G.L.& below 1.5 ft on pcc (4" thickness)on sand filling (6" thickness) Piller box should have 2( two ) coat of synthetic enamel paint powder coated over RO Primer with mechanical locking arrangement ,with pad lock arrangement also incl providing of Godrej brass make /weather proof Lock & key (3 no key) with it incl. 2 no eath terminal on it.The pillar box should be two part type (front & back side opening) with comprising of the following :- INCOMER:- a) S& fixing 415V, 315A TPN SFU in sheet steel encloser with 3nos. HRC din type fuse. [ Make : L&T/ Schneider/ Siemens]------1 no. BUSBAR: S & F of 415V, 415A, 4x50x5mm. copper bar as BBC in 16 SWG M,S sheet enclosure as per GS ---1 set.

OUTGOING: a) S& fixing 415V, 200A TPN SFU in sheet steel encloser with 3nos. HRC din type fuse. [Make : L&T/ Schneider/ Siemens]------2 nos. b) S& fixing 415V, 100A TPN SFU in sheet steel encloser with 3nos. HRC din type fuse. [Make : L&T/ Schneider/ Siemens]------2 nos. c) S& fixing 415V, 63A TPN SFU in sheet steel encloser with 3nos. HRC din type fuse. [Make : L&T/ Schneider/ Siemens]------2 nos. e) Inter connectiion between switches (upto 100A) and busbar by suitable grade of cupper stranded wire with necessary cupper socketing through cable entry box. and inter connection between switches (above 100A) and busber by suitable size of Cu. busbar through cable entry box. R,Y,B LED type indication incl. 3nos fuse with necessary connection by 1.5 sq mm standared cu wire. two nos. 415 V Danger plate.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (ISI-MEDIUM-GI Pipe).

S & F additional No. 4 SWG GI (Hot Dip) earth continuity wire as per GS.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Excavation of soil for installation of Earth Electrode and filling & ramming. (Morrum Soil)

Supply & Delivery of 9 Mtr Steel Tubular Pole (Zindal /Bansal) as per specification Type 410 SP -27 as overall length 9 mtr weight 108kg. & having diamention are : Out side dia & thickness of the Bottom section (114.3 x 5.40) mm; Middle; (88.9 x 4.85) mm,Top Section (76.1 x 3.25) mm with fixing the base plate & pole cap and GI earth bolt after making drilled holes etc. on pole incl. jacketing arrangement if reqd as per direction of EIC

Erection of Single Steel tubular pole of 9 mtr. length with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly as per GS.

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary Without Loop Box

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

S & F of 50 mm. dia 1.5 mtr. long detachable type G.I. Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 5 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC.

S & Delivery of 50 mm. dia 1.5 mtr. long detachable type G.I. Double arm bracket, suitable for pole head. The arm bracket shall be properly welded with 5 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC.

Supply & Fixing of 250 V. 100 Watt LED fittings complete with all accessories street light as per direction of EIC. in place of existing arm bracket. (Make- Bajaj, cat. no.- BRTFG 100W LED I/ Philips/ Crompton/Magic

Inter connection of HPSV fittings by 2 x 1.5 Sq. mm. PVC insulated copper wire from loop box with 19mm bore PVC polythine pipes as per direction of EIC

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

i) 1st coat of aluminium paint over 1 coat of RO priming.

ii) 2nd coat of aluminium paint over 1st coat.

S & Fixing of MS box with hing type front door and threaded locking arrangement in one side made of 16 SWG CRCA MS sheet of suitable size fixed in MS flat iron frame on wall as per direction of EIC. The box should comprising following accessories. a) S & F single dial 24 hrs. Analog timer (Make- L&T, AUTS01ANA00)---- 1 No. b) S & F 40Amp capacity TP Power Contactor. (Make- L&T(MNX40)) ----- 1 No. c) S & F of 415V, 40A, FP MCB type Change over. (Make- L&T/ Legrand)(for bypass arrangement) ---- 1no. d) S & F of 415V, 40A, FP MCB. (Make- L&T/ Legrand)(for I/C) ---- 1no. e) S & F of LED type indication (For on/off)(Make- L&T/ ABB)--- 2no. f) S & F 4 way MS stude (bolt type) bakelite molded terminal with spring washer or nuts as required.(for I/C & O/G)--- 2 Nos. The complete arrangement must be wiring by PVC insulated suitable 16sqmm copper wire for power wiring and 1.5 sq mm. for control wiring and also copper socketing the all copper wire end portion.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

a) 32 mm dia.

b) 50 mm dia

c) 80 mm dia.

c) 100 mm dia.

M/S JOGMAYA ENTERPRISE

B. MAHAPATRA AND CO