PERIODICAL SERVICES AND REPAIRS TO RCC CHAJJAS FACIA COLUMNS BEAM AND CONNECTED ITEMS TO INTERNAL EXTERNAL SURFACES OF BLDGS AND REPAIRS AND MAINT INCLUDING CLEANING OF SEWAGE LINE, MANHOLE, SEPTIC TANKS, SOAK PITS UNDER C2A AND C2B AREA UNDER GE (EA

Amount

M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

M&l for preparation of old surfaces of walls and applying one coat of whitewash complete all as specified and as directed.

M&L for preparation of old plastered surface of ceiling and applying one coats of white wash all as specified and as directed.

M&L for Providing 3 mm thick wall care putty on surfaces of wall as specified and directed by engineer in charge.

M&L for preparation of old surface of walls and applying two coats of Distemper oil emulsion, white or tinted complete all as specified and as directed,

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and as directed

M&L for preparation of old painted Concrete surface of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint all as specified and as directed.

M&L for french polishing on old wood and wood based surfaces of any description, width or girth including cleaning, filling to achieve smooth finish with two or more coats complete all as specified and as directed.

Taking down Cement plaster from brick walls/ceilling etc incl raking out joints, hacking for key and scrubbing down with water etc all as specified and as directed.

M&L rendering 15mm thick (10mm + 5mm) on fair face of brick work/concrete in CM 1:4 and finishing surface even and fair by mixing liquid water proofing compound as per manufacturers instructions complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ /Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finishing the surface even & fair complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of bricks or concrete surfaces as in ceiling surfaces in cement mortar 1:3 finished even & fair all as specified and as directed.

M&L preperation of newly plastered surfaces of walls and applying two coats of oil bound distember over a coat of alkali resistant primer using spray machine, spray hard to receive area to achieve excellent application using limited manpower over a coat of wall care putty not less than 1mm thick complete all as specified and as directed.

M&L preperation of newly plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint dark shade over a coat of primer (100% Acrylic) using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L Obliterating old writing of any description with synthetic enamel paint n.exc 0.10 sqm each to match the existing work complete all as specified and as directed.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 Cm high complete all as specified and as directed.

M&L for 50mm thick sand stone slab as in chajja /cover slab set and jointed over supports in cement mortar 1:4 including demolition of existing RCC slabs, chajja etc complete all as specified and as directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep for fixing joist,angle, channel section and sandstone slab in chajjas upto G+2 floors and finishing face of groove with cement mortar 1:3 complete all as specified and as directed.

S&F rolled mild steel joist, channel, angle or Tee section fixed independently without connecting plate etc cut to ordinary length i.e. within 20 mm of length indicated) of Fe 410 Gde E-250 quality including applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, kerbs roof padding etc as directed mixed with liquid water proofing compound as per manufacturer's instructions complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit/STP/CICA as approved by GE.

M&L for repairing the edges/corner of Chajja/roof projection and similar work by removing plaster width/girth not exceeding 150 mm and making good with 10 mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint dark shade (100% Acrylic) using spray machine, including required scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note :- Weather proof acrylic exterior paint shall be applied machincally by latest machine such as trucare Graco or equivalent having minimum presure of 3300 PSI.

M&L for preparation of old painted surface of walls by removing the existing treatment sanding the surface and providing 3mm thick wall putty to achieve smooth surface and applying two coat of royale base luxury emulsion paint over a coat of deco solvent base primer applied on dry putty surface only as per manufactures instructions and as directed by Engineering-in-Charge.

All as per Serial item No 27.00 herein before but applying two coats of plastic emulsion paint.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brickwork using fly ash old size bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius provided with access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) branch piece double (double Y) equal or un equal provided with access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) branch piece double (double Y) equal or un equal provided with access door complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) branch piece double (double Y) equal or unequal provided with access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamps flat iron of size 25x3mm thick provided at 1 mtr spacing complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps of size 25x3 mm thick flat at 1 mtr spacing complete all as specified and as directed.

M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

S&F in repairs 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets, stops, rollers end caps etc. complete all as specified and as directed.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in Sqm n.exc 0.50 Sqm in each pane complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. and getting out in soft/ loose soil.complete all as directed and as specified and as directed.

All as per serial item No 43.00 here-in-before but depth exc 1.5 m and n.exc. 3 m depth complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil all complete all as specified and as directed.

Removing of excavated surplus materials to a distance exc 50 m but nexc 100 mm and depositing where directed a level n.exc 1.5 mtrs above the starting point complete all as specificed and as directed.

Demolition and breaking up 100mm internal dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed.

Demolition and breaking up 150mm internal dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed.

Demolition and breaking up 200mm internal dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) bed to 100 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested compete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) bed to 50mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm int dia of pipe.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) bed to 200 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for of pipe complete all as specified and as directed.

M&L for Salt glazed stoneware drain pipes, grade `A` of 100mm internal dia laid in trenches and jointed complete all as specified and as directed.

M&L for Salt glazed stoneware drain pipes, grade `A` of 150mm internal dia laid in trenches and jointed complete all as specified and as directed.

M&L for Salt glazed stoneware drain pipes, grade `A` of 200mm internal dia laid in trenches and jointed complete all as specified and as directed.

Construction of Soakage, well of size 1.80m dia 3.00m deep compete all as shown in TD drawing No CEAA/TD/80 including excavation, PCC in foundation, brick work, Honey combing brick work, filling with brick bats, RCC slab cover and fitting complete all shown in drawing and as specified and as directed.

Cleaning of sewage lines which are blocked /filled with sludge, semi solid/material etc by roding manholes to manholes manuually or by mechanically by machine and removing the sludge to a non inhabitant area or buried into ground all as specififed for the follwoing internal dia of pipe line complete all as specified and as directed.

150 mm dia

200 mm dia

Note for serial item No. 57.00, 57.01 & 57.02 (i) Sewage line cleaned should function smoothly during entire contract period and measurement shall be made only once. (ii) Contractor shall be responsible to clear any further blocagkage without any extra payment till completion of work.

Cleaning of blockage of any type of wc (Indian/pedestal) from WC pan to Ist manhole in single/double storied bldg including resetting/ refitting of asccess door in soil pipe where open without causing any damage to the WC pan 'P' or 'S' trap and pipe including fitting complete all as speciffied and as directed.

Cleaning of any type blockage of in Nahani trap provided in bath room, kitchen and indoor water pipe of kitchen sinks and WHB and removing all the sludge and foreign material from the trap and waste pipe from blocked trap to gully trap/ surface drain wherever opened or without causing any damage to the trap and pipe including fitting distance of gully trap from outer wall of bldg upto 2m complete all as speciffied and as directed.

Cleaning and de-sludging by excavating in water liquid sludge in foul position from septic tanks and soak wells of any size depth or width mechanically with pump and filling in the covered tank mounted on truck and disposing of the same out side of MOD land complete all as specified and as directed.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

Demolition of reinforced cement concrete as in cover slabs/ roof slabs of any description (reinforcement cut as required to faciliate demolition) complete all as specified and as directed.

M & L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregates) as in foundation filling & mass concrete complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benchings etc complete all as specified and as directed.

M&L for form work to soffits of suspended slabs such as roof slabs, landing and similar work n exc 200 mm thick (Horizontal or sloping) for rough finished surface complete all as specified and as directed.

Form work to edges of concrete flat, roof slabs, shelves not exceeding 200 mm thick (Horizontal or slopping) for rough finished surfaces.complete all as specified and as directed.

M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for MS TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and as directed.

All as per item No 69 here-in-before but MS round bar 10 mm dia and over as in handles of manhole covers complete all as specified and as directed.

M&L for providing Precast cement concrete type B1 1:2:4 (using 20 mm graded aggregate) as in cover slabs for manholes etc complete all as specified and as directed.

M&L for reinforcement cement (nominal mix) type B1 1:2:4 (using 12.50 mm graded stone aggregate) as in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.complete all as specified and as directed.

M&L for providing precast cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in louvers and jallies 40mm thick including all mouldings set in CM 1:4 complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement morter 1:4 and finishing the surfaces even & smooth without using extra cement complete all as specified and as directed.

M/s Orient Traders

B S ENTERPRISES

M/s Hoti Lal Contractor

M/s RCC

M/s M S CONSTRUCTION

mh enterprises

ASHUTOSH BUILDERS