ward 03 me hafij ke makan se mustkeen ke makan tak cc nali marmmat kary

Site Clearnce and other unseen item

Pthotgraphy work

Earth work in excavation in Drain

Sand filling in foundation with complete work.

P.C.C. work in 1:4:8 cement sand with stone dust in bed of drain.

Class-150 brick work in 1:4 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. Required for proper completion of the work. S.I. No.305

12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 2 part of find sand of 1.25 fineness modulus. SI No. 584

RCC work with cement approved coarse sand and 2cm. (3/4'') gauge approved stone ballast in the proportion 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost. S.I. No.-288 (As in item (283) above but in RCC T-beam and slab roof in 1.1.5.3)

Mild steel of iron in plain work such as reinforced concrete/ brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks and authorised over lapping shall be measured. SI No. 504

Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 1:6:12 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. S.I. No.273

CC work in 1:1.5:3 with Cement sand and 20mm gauge granite stone grit including supply of all materials, labour and tools and plants etc. required for proper completion of the work.

Providing and Laying of specified quality separting membrane plastic sheeting of 125 microns.

Providing and fixing filler material (Shalited Board 18 mm thick) at construction joint.

Fixing of Display Board etc.

Please Enable Macros to View BoQ information