Water Supply Scheme Khawaspur Bifurcation from Existing Water Supply Scheme Hothian MH PC, Block Khadoor Sahib, Distt. Tarn Taran. Under Nabard-XXVII

Amount

Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tubewellis lowered & tested, equipment as required such as hand boring machine and its accessory, transportationto site and vice versa etc. complete in all respect.

(d) Boring with 300mm id Housing Pipe up to 150 M depth

Supplying, lowering of MS Pipe as per IS: 4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.

(e) 250 mm nominal diameter (weight 52.3 kg per meter) 8 mm thickness

(b) 150 mm nominal diameter (weight 21.6 kg per meter) 5.4 mm thickness

Supplying & Fixing MS Taper/reducer made out of 6mm thick M.S. Sheet complete in all respects reducer size 250x150mm.

Supplying, & Fixing lowering of Stainless Steel Cage type wire wound screen as per IS: 8110-2000 or latest ISI marked Duly welded with suitable grade S.S welding electrode to lower the strainer into tubewell bore.

(i) 150 mm Steel Stainer (slot size 0.15mm/0.20) 5.00 mm thickness

Supplying, Lowering & fixing of M.S. special socket to connect S.S. Strainer to M.S. Pipe duly welded with suitable grade welding electrode complete in all respect.

(d) 150 mm internal diameter

Supplying, Lowering & fixing of stainless steel socket as per IS 8110-2000 or latest ISI marked duly welded with suitable grade SS welding electrode to lower the strainer into T/Well bore complete in all respect.

( a)150 mm i/d

Supplying at site Wooden box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore.

Collection of water sample from different strata and testing of sample from approved laboratory (Physical & chemical Analysis)

Supplying and fixing M.S well cap having thread to fix on housing pipe complete in all respect

(d) 250 mm internal diameter

Supplying & fixing of bail plug of M.S. pipe complete with inverted U-hook attached to the bottom plug complete in all respect.

(b) 150mm internal diameter (weight 21.6 kg per meter) 5.40 mm thickness

Supplying & fixing of M.S. Clamp of size 150mm x 12mm made out of MS Flat 1.52 m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Development of stabillizing of the tubewell with air compressor of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

(a) Capacity of Air compressor 300 cfm at 250 PSI

Development of stabillizing of the tubewell with submersible pump of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)

Providing for santary clay seal (as per BIS code IS 2500-2019) including sterlization of T/W

Construction of one No. RCC OHSR having capacity 100 KL (1,00,000 ltrs) height 24.00 mtr. up to FSL & 20.50 mtr. up to sill level from formation level complete with external RCC stair case with landing slabs at each staging RCC roof, ventilator single man hole cover lightening conductor, aluminium ladder inside tank portion etc. complete as decribed in schedule No. 3. Providing & fixing CI/D/F expansion joint conforming to IS -1536-1989 or latest and bail mouth and D/F puddle collars as per DWSS design, Duck foot bends conforming to ISI-13382 and CI/DF sluice Valve duly ISI marked ( IS 7181-1986 or latest) one each with inlet, outlet and scour pipes including providing and installing intel, outlet, scour pipes and overflow DI double flanged pressure pipes horizontally cast in sand moudls as per IS 8329-2000 and latest duly ISI marked from bottom dome to duck foot bend and further up to 2.75 mtr as per detail specification. TMT steel painting Providing and applying internal crystalline slurry of hydrophillic in nature for water proofing managementr for vertical & horizontal surface and swellable type water stop tape of all complete shall be included in cost complete in all respect as per specifications. (The specification & drawing are based on safe bearing capacity of soil of 8.75 tones per sqm. In case the safe bearing capacity of soil is less than 8.75 tone per sqm. the contractor shall submit his own design for foundation portion based on actual safe bearing standard capacity as per DWSS specifications. The difference in quantites from the standard drawing based on 8.75 tone per sqm. to the safe bearing capacity will be paid as per CSR+prevalling celling premium). It also includs, providing & fixing automatic Electronic water level control device and construction of Plinth protection around OHSR with masonary toe wall with 40mm thick CC 1:2:4 on top over 100mm thick CC 1:8:16 & inside earth filling within lead of 5 km including overflow haudi complete in all respects.

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications 10 kg /cm2 mechanically

160mm o/d pipe lines laid complete

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) Class -PN-as per ISI

150mm i/d Sluice Valve Flanged

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department (3 no. each of size 0.9m x 0.9m)

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering (22.50 BHP) 698 LPM against a head of 75 mtr along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including M.S. Column Pipe of suitable size 100 mm =50 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible 6.00mm2 100 mtr cable (reputed make) complete in all respects as per standard Specifications.

Cost of pumping set (698 LPM, 75mtr head)

Cost of lowering (With length)100mm 46mtr.

Cost of submersible cable (with length) 6.00mm2

Cost of panel board

C.I FITTING INSIDE PUMP CHAMBER

Providing and installing 150 mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects as Annexure A12 – 1 & Drawings D-12 & D-17.

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Manually) (6kgf/cm2) (excavation & including specials)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 160mm o/d

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechnically) (6kgf/cm2) (excavation & including specials)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

PVC pipe 160mm o/d

PVC pipe 210mm o/d

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

PVC pipe 160mm o/d

Dismentalling of Mettaled roads and back filling with excavated earth

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

PVC pipe 160mm o/d

PVC pipe 210mm o/d

Hand boaring Horizontaly for crossing of pipe under road or any other obdtacle by using Augar/Boki method including excavation, stringing and jointing of pipe upto 160 mm complete

Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy pattern) as per IS 778 with hand wheels, on GI Pipe lines laid in the ground or inside buildings including all carriages complete

50MM i/d Gun Metal peet valve heavy pattern

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge) Class PN-1 as Per ISI

80 mm I/d S/V Flanged

100 mm I/d S/V Flanged

150 mm I/d S/V Flanged

200 mm I/d S/V Flanged

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department with each of Size 0.6m x 0.6m

Providing water connection to household up to Wall with providing, laying, jointing, testing GI pipe lines 15 mm i/d = 2.50 mtr. , B-Class as per , (Above ground level) , Providing & fixing MDPE pipe 15 mm i/d with specials 2.00 mtr. (Below GL), including cost of special such as tees, bends, sockets, elbow, peet valve, union, nipples and hocks etc, cutting, threading and testing in trenches in the ground and ISI 15 mm i/d GM ferrule as per IS" 2692 and 3" i/d clamp with C..I. bib cock, 15 mm i/d as per IS " 210 with stainless steel spindle of approved make as per Complete in all Respect

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Construction of Pump Chamber Size 3.05 X3.70 mtr with toilet block including cost of Electric wiring & sanitary installations as per standar design (Drawing D-2) complete in all respect.

Development of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing .

Providing & fixing Pcc fencing Poles with 6'' Height,3"x3" Top & 4''x3'' Base provided with 3 Nos. Hooks complete in all respect

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing.

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing .

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr complete in all respects

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works .

Providing & fixing MS Sign Board as per standard size of DWSS

Environmental

Rough grassing including uprooting rank vegetation and weeds by digging the area to a depth of 15 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, mixing fertilizer, levelling and dressing for planting new grass, including disposal of all rubbish with all leads and lifts, planting doob grass in rows 15 cm apart in both directions, watering and maintenance till first mowing.

Digging of pits in all kinds of soil & refilling the same, with the excavated earth mixed with well decayed farm yard manure @ 30% of pit volume and insecticide for termite control

Supplying and planting permanent trees in prepared pits and watering

Planting ground covers (ordinary) including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 25cm distance from plant to plant and row to row.

Planting bulbous flower beds including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 30cm distance from plant to plant and row to row.

Provision for one way stand post with khura complete in all recpect.

Provision of carriage

Carriage of Bajri (Course Agrregate)

Extra Carriage of Sand (Fine Aggregate)

Amardas Engineering Works