Tender for Various type repair jobs for maintenance of Plant and Machinery on Contract Basis.

Amount

Dismantling, fabrication and erection of M.S. plate job (tank,gutter, chute, pipe rolling & M.S. Structure plat farm) upto 12 mm thickness plate.

i) Dismantling

ii) Fabrication

iii) Erection

Dismantling, fabrication & erection of M.S., G.I. pipe line (1’’ to 12’’)

i) Dismantling

ii) Fabrication

ii) Erection

Dismantling, fabrication and erection of pipe accessories (bend,reducer,flanges,blind,nipple, Tee, etc.)(1’’ to 12’’)

i) Dismantling

ii) Fabrication

iii) Erection

Dismantling of valves/NRV

i) Upto 6” dia

ii) 7” dia to 12” dia

Erection of valves/NRV

i) Upto 6” dia

ii) 7” dia to 12” dia

Dismantling and erection of angle/Sluice/NRV valve 16” – 36”

i) Dismantling

ii) Erection

Dismantling, fabrication & erection of hand railing

i) Dismantling

ii) Fabrication & Erection

Dismantling & erection of S.S. pipe.

i) Dismantling

ii) Erection

Dismantling & erection of Seamless pipe.

i) Dismantling

ii) Erection

Dismantling & erection of seem less pipes Accessories (bend, reducer blind nipple,Tee, Flange)

i) Dismantling

ii) Fabrication

iii) Erection

Dismantling, fabrication & erection of M.S. pipe (12” dia to28’’ dia)

i) Dismantling

ii) Fabrication

iii) Erection

Dismantling fabrication erection pipe accessories (Bend, Reducer, Tee, Nipple, Flange Blind) 12” dia to 28’’ dia)

i) Dismantling

ii) Fabrication

iii) Erection

Dismantling fabrication erection pipe accessories (Bend, Reducer, Tee, Nipple, Flange Blind) 28” dia & above

i) Dismantling

ii) Fabrication

iii) Erection

Dismantling and erection of vapour/Exhaust pipe

Dismantling/fabriction and erection of vapour/Exhaust Pipe bend.

i) Dismantling

ii) Fabrication

iii) Erection

Dismantling, fabrication & erection of M.S. coil

i) Dismantling

ii) Fabrication

iii) Erection

Repair/replacement of worn out boiler ducting

Welding of pan shell from inside at the joint of shell and cone.

Dismantling fabrication, repair & erection of Semikestner/Vapour-cell save all

i) Dismantling

ii) Fabrication

iii) Erection

iv) Repair

Dismantling fabrication, repair & erection of quad body save all

i) Dismantling

ii) Fabrication

iii) Erection

iv) Repair

Dismantling fabrication and erection of pan umbrella made from 6 mm thick plate.

Dismantling fabrication and erection of Evaporator Body umbrella.

Dismantling of old tubes & fitting of new SS tube of Juice heater with hydraulic testing. (Retubing of Body)

Dismantling of old tubes & fitting of new SS tubes of Quad body with Hydrolic testing (Retubing of Body)

Welding of exhaust/vapour joints.

Dismantling & fabrication and erection of boiler Expansion joint.

Dismantling fabrication and erection of juice Sulphiter So2 coils

Dismantling fabrication & erection of So2 furnace primary cooler

Dismantling/ fabrication and erection of after burner

Dismantling & refitting and expanding of air heater tubes and trial.

Dismantling fabrication and erection of down take of pan.

Cutting & refitting shell of Quad /Pan save -all for checking/cleaning.

Dismantling, fabrication & erection of juice sulphitor SO2 Box

Replacement of worn out perforated plates of Steam entry at quad bodies

Cutting of portion of calenderia shell & its refitting for cleaning of calenderia of quad/juice heater.

Replacement of worn out SO2 furnace Cooler pipes with dismantling & erection of cover.

Replacement of side plates/bend plates/box of DSM screen

Replacement of worn out M.S. channel runner, Box made out from M.S. Plate and Chanell etc for rack carrier & Bagasse carrier etc.

S.S. lining of inter rack carrier trough / Fibrizer side plates or any other part.

Replacement of worn out portion of rack carrier/bagasse Carrier trough

Dismantling of old gear & erection of new planetary gear of crystallizers.

Fabrication and erection of M.S. grating for plate forms made From M.S. angle 25x25x6 mm and M.S. flat 25 x6 mm.

Dismantling, fabrication & erection of SO2 furnace cooler shell

Erection of M.S. plates 3mm to side wall of boilers with proper strengthening with M.S. angles.

Fabrication of 6’’ M.S. cross from seamless pipe

i) Dismantling

ii) Fabrication

iii) Erection

Dismantling fabrication & erection of condensate box of quad /pan

Replacement of worn out steam jacket of Quad body.

Replacement of weak portion of pan bottom saucer.

Dismantling, repair and erection of pan body save all

i) Dismantling

ii) Erection

iii) Repair

iv) Fabrication

Replacement of bottom of syrup receiving tank.

Dismantling, fabrication and errection of steam jacket of Pan

Strenghting / replacement / repair of syrup tank bottom at Pan floor.

Dismantling and replacement of overhead tank bottom.

Dismantling and replacement of sides plates about 1 meter height of over head tank.

Replacement of worn out side plates of fibrizer.

Fabrication of mill roller gear guard.

Fabrication of motor pump beds from M.S. channel/ Angles.

Replacement of J pipe of Quad/ Pan/ Evp. Body

Dismantling, fabrication & erection of Heavy & Light tank Vacuum filter

Dismantling, fabrication & erection of Vacuum filter tray

Dismantling, fabrication & erection of Agitator of vacuum filter

Replacement of side plate of cane carrier

Strengthning of mini cooling tower & fabrication & errection of 02 no. M.S. Tank.

Strengthning of both molasses storage tank.

Replacement of FD fan damper.

Fabrication of cover mill bearing.

Fabrication & erection of Mill house Boot (Donga)

Dismantling ,fabrication & erection of expansion joint of economizer at boiler.

Replacement of shaft & arms etc of Crystallizer.

Dismantling, fabrication & erection of transit heater with hydraulic testing.

Replacement gutter any station

Replacement of top cone of syrup sulphiter with replacement of portion of its shell.

Fixing of M.S. ring in the bottom of pans to strengthen the bottom with shell.

Replacement of worn out body of magma mixture.

Dismantling, fabrication & erection of Juice Tank at Mill house.

Dismantling of syrup receiving tank for Boiling House

Fabrication Erection of motor gear box of main rack carrier for double drive arrangement.

Fabrication Erection of motor reduction gear box extend of platform of double drive of RBC.

Removal of 3 Nos Sulphited Juice receiving tank and fabrication erection of new tank of approx size(2.5mtr dia x3mtr height).

Dismantling fabrication erection of syrup/B heavy tanks approximate size(2mtr x 5mtr x 3mtr).

Patching work at any vassele/tanks etc.

Fabrication and erection of platform at apposite side of bagasse carrier existing platform.

Replacement of wornout arms of crystallizer.

Dismantling fabrication repair and erection of Sugar melter as per existing size.

Dismantling fabrication and erection of underground Filtrate juice tank at Oliver. (Underground tank Will be of S.S material)

Repairing and Strengthening of final molasses line support column.

Modification in condensate bottles of semikestnor and Vapor cell with connecting pipe line and valves etc.

Repairing Strengthening and plastering (civil work) of Boiling house equipment columns.

Replacement of worn out columns of vacuum filter.

PRADEEP ENGINEERING WORKS

RAJ CONSTRUCTION CO