REPAIRS TO FALSE CEILING JOINERY ROLLING SHUTTERS IN CERTAIN BLDGS AT AUNDH UNDER GE MH AND RH KHADKI

Amount

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete M-15 grade (nominal mix) using 20mm graded stone ggregrate, depth of embedded portion of holdfast exc half bricks and not exc one brick all as specified and directed

Taking down chowkat without taking off shutter from frame exc 1.5 and n.exc 4 Sqm each all as specified and directed

Taking down shutters of any description exceeding 1 Sqm and n.exc 2Sqm each all as specified and directed.

S&F 125x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S&F 105x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

M&L for PCC M-10 grade (nominal mix) using 12.50mm graded stone aggregate as in filling of pressed steel chowkat all as specified and directed

S&F 35mm thick (2nd Class hardwood) factory made gauzed and skeleton door shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars) , edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied and fitted to chowkats all as specified and directed

S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed.

S&F 30mm thick flush shutters, solid core construction with block board core and plywood face panels , commercial type on both sides all as specified and directed.

S & F Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed & fixed length of bolt 250 mm all as directed.

S & F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixe 150mm long.

S & F 150 mm size Mild steel pressed handles, oval type, stove enamelled black complete.

S&F in repair 2nd class hard wood plain, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in cupboards, almirah in any position including polish complete all as specified and directed.

S&F in repairs 40mm width continuous (paino) hinges, mild steel, bright finish or electrogalvanised all as specified and directed

S&F in repairs 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in shelves all as specified and directed.

S&F in repairs cup board knobs 40mm size with all fixing screws etc complete all as sepcified and directed.

Taking down chowkat without taking off shutter from frame n. exc 1.5 Sqm each all as specified and directed

S & F in repairs hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and directed by Engineer-in-charge.

S&F 100 mm mild steel butt hinges medium weight, cold rolled all as directed.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip S&F in ordinary glass 3mm thick glazing with oil putty in squares n exc 0.5 sq. m each pane all as specified and directed

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip S&F in repairs Figured glass, pinhead type 4mm thick glazing with oil putty in squares n exc 0.5 sq. m each pane all as specified and directed

S& F fixed in repairs. 4mm thick sheet glass ordinary quality exc 0.50 Sqm but not exc 1 Sqm each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm fixing to steel window with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L preparation to wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S&F powder coated (minimum thickness of powder coating shall not be less than 50 microns of approved coloure) aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F aluminium powder coated (minimum thickness of powder coating shall not be less than 50 microns of approved coloure) window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x 1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade complete all as directed. Note : 4mm thick glazing & 0.56 mm dia SS wire mesh shall be deemed to be included in unit rate quoted

S&F powder coated (minimum thickness of powder coating shall not be less than 50 microns of approved coloure) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Supply only 5.5mm thick sheet glass ordinary quality and glazing exceeding 0.5 Sqm in each pane all as specified and directed .

S&F aluminium louvered ventilators of section size 100mmx 25mmx 1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator all as directed by Engr-in-Charge. Note : Glass & wire mesh shall be deemed to be included in unit rate quoted.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening all as specified and directed.

S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed.

S & F stainless steel Butt hinges 75 mm long, medium weight, cold rolled steel.

S & F in 125 mm size extruded aluminium alloy handles, fabricated type anodised.

S & F in Aluminium, anodised, barrel tower bolts of extruded section 125mm long complete all as specified and directed.

Dismantling steel rolling shutter including assembly exceeding 4 Sqm but not exceeding 12 Sqm and repair for proper functioning by replacing rolling assembly and re-erecting the shutter, including straightening, cutting and welding of shutter angles, channels providing proper guides as required and making good, functioning by applying greasing , oiling for smooth and easy movement of the shutter and applying two coats of synthetic enamel paint of matching colour/shade, including preparation of old steel surfaces complete all as specified and directed.

S&F in repair locking arrangements of CP brass for aluminium doors i.e , by placing new lock 4 lever, vertcal type of 65mm , with triplicate key etc complete all as specified and directed.

S & F in repairs Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed & fixed length of bolt 250 mm all as directed.

S & F in repairs Mild steel barrel tower bolts, stove enamelled black, with bright bolt 150mm long.

S & F in repairs 150 mm size Mild steel pressed handles, oval type, stove enamelled black complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile & laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified.

M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile & laid over and including 10 mm thick plastering as in backing coat in cm 1:4 complete all as specified.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile & laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified.

M&L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handles etc all as specified and directed.

S & F in repairs powder coated aluminium bracket for curtain rods all as specified and directed.

S&F in repairs 20mm Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as specified and directed. Note : Brakets shall be measured and paid separately under relevant items of this BOQ.

S&F in repairs drawer handles, mild steel, flush drop (65 to 75mm grip) on 4 screw plate, including letting in all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 61 kg and fixed all as specified and directed.

S&F in repairs 150mm rubber door stopper of aluminium alloy body, anodised all as specified and directed.

Dismantling wall and ceilihg boards (Fiber pulp, insulation etc or insulation boards any thickness including cover fillets.

M&L for false ceiling of plain gypsum board 12mm thick and frame made out of MSGI BPS grade, angle 24mm x 24mm x 0.43mm, 'T' section 24mm x 25mm x 0.30mm and main runner 'T' section 24mm x 38mm x 0.35mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c, hanging with 2.50 / 3.00mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with painting two coats of plastic emulsion paint over one coat of primer and preperation of surface complete all as specified and directed by the Engr-in-Charge.

S&F POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction allas specified.

S & F in repairs cloth drying pulley system 6 feet long with alominium of respective size and all fitting material like channel, pilley, rope, locks, consumables etc. Make: Easy dry or equavalent as approved by GE.

M/S SANDEEP CONSTRUCTION COMPANY

A B S ENTERPRISES

S P DEVELOPERS

V.R.PRAJAPATI AND CO.