PROVN OF PATH WAY AND PROVN OF 2 NOS URINAL POINTS WITH ALLAIED FACILITIES AND PROVN OF 01 TOILET BLOCK AT DBS SWC AND SPL REPAIR TO TOILETS BLDG NO. CERTAIN BLDS AT NORTH CAMP AT MFFR UNDER GE NORTH BIKANER

Amount

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge complete

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), all as specified and directed by Engineer-in Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips including providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick/stone masonry built in CM complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing 15 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing 20 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and as directed by Engineer-in-Charge.

Dismantling100mm cast iron /PVC pipes fixed to walls or laid in trenches in any position complete all as specified and as directed by Engineer-in-Charge.

Dismantling water tanks and removing to store exc 250 ltrs and nexc 500 ltrs complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etcor notexceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes,, etc and getting out in loose/soft soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each layer complete all as specified and as directed by Engineer-in-Charge.

Removing excavated soil not exceedind 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including base of manholes complete all as specified and as directed by Engineer-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in-Charge.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone agregate as sub base of floors complete all as specified and as directed by Engineer-in-Charge.

Machine pressed precast conctete interlocking paver block coloured and glossy any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade to IS 15658-2006 manufactured using grey cement and Colour pigment including 25 mm Sand Cushioning complete all as specified and as directed by Engineer-in-Charge.

M&L for Brick work with fly ash bricks old size straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-In-Charge.

M&L non skid ceramic tiles 7 to 8 mm thik (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors on 15mm thick screeding in CM 1:6 set set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured tiles in vertical surface 300x 200x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on 10mm thick screeding in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

M & L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.

M&L 100mm thick for PCC 1:2:4 type B-0 (12.50mm graded stone aggregate) for roof covering complete all as specified and as directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the steel frame at site complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engineer-in-Charge.

PCC 1:3:6 type B-1 using 20mm graded aggregate as in bed blocks of hold fasts complete all as specified and as directed by Engineer-in-Charge.

M&L for 5 mm thick rendering in cement mortar 1:3 on stone masonry surface or surface other than fair face of brick work, in ceiling, finished even & smmoth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing new platered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L for 10mm thick Rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces and next layer 5mm thick with water proofing compound , finished fair and even without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 10mm thick Rendering in cement mortar 1: 6on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of oil Bound Distemper white or tinted over a coat of primer as per manufacturer;s instructions complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over a coat of as per manufacturer;s instructions complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparing old plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over a coat of as per manufacturer;s instructions complete.

M&L for Preparing old plastered or unplastered surfaces of walls and applying two coats of oil Bound Distemper white or tinted over 3 mm coat of birla white putty a coat of white wash complete.

S&F 5mm sheet glass, ordinary quality and glazing with oil putty in squre n exc 0.5sqm in each pane but forsted complete all as specified and as directed by Engineer-in-Charge.

Providing cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in cills, bed block, copings,bed plates, bond stone, etc including weathering, slightiy rounded or chamfered angles and throating as directed including necessary form work complete.

M&L for preparation new or previous untreated steel & iron surfaces of any description over 10cm in with or grith and applying two coats of synthetic enamel paid over & including a coat of red oxide primer complete.

M&L 5cm thick sand stone slabs in shelves, chajjas, shelves etc n exc 2m in length set and pinted in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

S&F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.

S&F in repair, white, vitreous china WC squatting pan, Orissa pattern 580mmx440mm size with integral foot rest, and connection to flush pipe/trap and connection to anti syphonage pipe etc. including making good to floor as per existing specifications complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous china wash basin, Pedestal type , white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, and including waste Pipe and waste Coupling complete.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 190 gms) complete.

S&F Vitreous china bowl urinal Haif stalf type, white, with grating and union for discharge pipe including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, including providing & fixing 5 litres cast iron automatic flushing cistern with brackets, 32 mm bore PVC waste pipe and 25 mm bore light grade GI flush pipe complete.

M & L White Marble work 20 to 25mm thick (table rubbed and polished) in steps, jambs, pillars, for Patition , windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete.

S&F PVC (SWR) pipes, single socketed,in any length with rubber ring joints, fixed to walls, 75mm bore complete.

S&F PVC (SWR) bends any radius, 110mm bore complete.

S&F PVC (SWR) branch pieces, single (single Y) equal or uneqal, 110mm bore complete.

S&F PVC (SWR) couplers, 110mm bore complete.

S&F PVC (SWR) 'P' trap, wc connecter 125/110mm bore complete.

M&L for 15mm bore steel water tubes, medium grade. ISI marked, galvanised with all fittings, fixed to walls and ceilling or laid in floors complete.

M&L for 20mm bore steel water tubes, medium grade. ISI marked, galvanised with all fittings, fixed to walls and ceilling or laid in floors complete.

S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, double layered ISI marked , hoisted and fixed in position including connecting up pipes complete.

S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, double layered ISI marked , hoisted and fixed in position including connecting up pipes complete.

S&F Bib taps cast copper alloy Chromium Plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete.

S&F pillar tapes, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete.

S&F angle valve cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (Minimum weight 210 gms) complete.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete.

S&F Steel ventilators with top hung shutter including hinges, steel peg stay complete.

S&F Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long, with haps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete.

S&F Extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete.

M&L for Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in packing under and hunching against the sides of pipes, without bedding layer, after they are laid and tested in 150 mm dia of pipe complete all as specified and as directed by Engineer-in-Charge.

S&F Salt glazed stone were drain pipes, grade ‘A’ 150 mm bore (internal dia) laid in trenches over existing concrete bedding and jointed complete all as specified and as directed by Engineer-in-Charge.

Cutting into existing manholes or connecting new, drains making good existing benching or forming channel and reforming benching with cement and sand mortar 1:4 or PCC 1:2:4 type B-1 smooth finished and reforming benching as in 150 mm dia of pipe complete all as specified and as directed by Engineer-in-Charge

M&L for 75mm thick Cement concrete 1:3:6 type C2 using 20mm graded stone aggregate in plinth protection, , finished even and smooth using extra cement , laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.

Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete (reinforcement to be measured separately)

M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

M&L 18-20 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L 18-20 mm thick machine cut kota stone slab as in skirting/dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

M & L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge.

Anodised aluminium frame and Shutter for doors, windows, ventilators with one or more rebates including joining cleat, Deko Grill , Partitions etc for fixing complete all as specified and as directed by Engineer-in-Charge.

S&F Pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate of profile 125x60mm complete all as specified and as directed by Engineer-in-Charge.

M&L MS work as in hold hast complete all as specified and as directed by Engineer-in-Charge.

S&F 2nd class hard wood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partcile board with commercial face veneers complete all as specified and as directed by Engineer-in-Charge.

S&F 2nd class hard wood 35mm thick Plain, framed, Glazed shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partcile board with commercial face veneers complete all as specified and as directed by Engineer-in-Charge.

M&L for painting to new wooden surface over 10cm width or girth with two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.

S&F 100mm lomg butt hinges, cold rolled mild steel medium weight complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel barrel tower bolt stove enameled black with bright bolt of length 200mm complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and as directed by Engineer-in-Charge.

S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. With glazing bar dovtailed or welded including one shop coat of primer complete all as specified and as directed by Engineer-in-Charge.

S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. Without glazing bar dovtailed or welded including one shop coat of primer complete all as specified and as directed by Engineer-in-Charge.

S&F 3mm thick Sheet glass , ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge.

M&L Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St-240, conforming to Fe- 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel joist , channel, angle, tee section, fixed independently without connecting plates etc. including welding as necessary confirming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

M&L Roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in cement mortor 1:6 n.exc 3 m in length complete all as specified and as directed by Engineer-in-Charge.

S&F Tower Rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and as directed by Engineer-in-Charge.

M&L Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 Gde E-165 all as specified and as directed by Engineer-in-Charge.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5 cm and dia of shank 5 to 10 mm complete all as specified and as directed by Engineer-in-Charge.

M&L for Mild steel framed worked as in doors or gates of angle or other section with gusset angle chowkhat , plates,rails braces etc. incl all necessary drilling,welding,bolting or riveting etc. complete and door for hanging and fastening and fixing complete Fr-290 (Gde-165) complete all as specified and as directed by Engineer-in-Charge.

S & F Pre-painted galvatume ( Sand Colour ) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of sand colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as complete all as specified and as directed by Engineer-in-Charge.

S & F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of sand colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing anodized snap grid frame work of size 605mm x 605 mm for false ceiling including necessary notching. The snap grid shall consist of anodized aluminium main & cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/RM and 23.5 x 26.4 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminum angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminum angle of size 35 x 25 x 2 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12 mm thick mineral fibre board fixed in grid support with 2.50 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of aluminum as per specification and providing two coats of synthetic enamel paint over a coat of pink primer including preparation to exposed surfaces complete all as specified and as directed by Engineer-in-Charge.Make of mineral fibre Board : Armstrong Ceiling Tiles.

S& F Harrison rails,mild steel,curtain rod chromium plated with fixing brackets, stops, rollers complete all as specified and as directed by Engineer-in-Charge.

M&L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 3 M effective depth complete all as per CEBTZ TD drg & as specified and as directed by Engineer-in-Charge.

M&L Soakage wells exc, in any type of Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, with Stone Patti cover Slab Masonry/ Filling with brick bats complete of size 1.8 M dia X 3.0 M deep complete all as per CEBTZ TD drg & as specified and as directed by Engineer-in-Charge.

Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc complete all as specified and as directed by the Engr-in-Charge.

Taking down of unserviceable DBs/switch fuses/changeover in sheet steel enclosure complete with MCBs/Fuse/grips any capacity and removing from site and making good disturbed surface of wall, floor etc. Taking after disconnecting all cable complete all as specified and as directed by the Engr-in-Charge.

M&L Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including new sunken box covered with and including 3 mm thick bakelite laminated sheet top cover of approved make for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 101 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge

All as per item No 101 here-in-before but socket point on independent board complete as specifed as directed by Engineer - In - Charge

All as per item No 101 here-in-before but cable 2.5 Sqmm for 15 Amps switch socket outlet on independent board complete as specifed as directed by Engineer - In - Charge

S&F Switch piano flush type, Single pole 5 Amps, one way ISI marked, complete all as specified and as directed by Engineer-in-Charge S&F Socket outlet 2 in 1, 3 pin, 5A ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F Socket outlet 2 in 1, 3 pin, 5A ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F switch socket combination 5 in 1, 5/16 amp flush type fixed on laminated sheet top cover (laminated sheet top cover is including in point wiring).

S&F Lamp holder insulated body with back plate for conduit/casing capping fittings complete all as specified and as directed by Engineer-in-Charge Make : CG/Havells/Phillips.

S&F Ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Supply & fix LED bulk head ,09W / 10 W, IP65 diacast aluminium housing powder coating finished complete all as specified and directed by Engineer-in-charge.Make : CG / havell's / Phillips.

S&F Fan regulator electronic type, 230 Volt, 150 Watt 2 modules with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Complete all as specified and directed by Engr-In-Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louver Complete all as specified and directed by Engr-In-Charge.

S&F Sheet metal enclosure for distribution boards, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 8 ways double door , supplied and fixed in repair, including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make - Legrand/ GE/Seimens/L&T/Schneider/Indo Asian/C & S/Strandard/BCH/HPL

S&F Sheet metal enclosure for distribution boards, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 4 ways double door , supplied and fixed in repair, including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make - Legrand/ GE/Seimens/L&T/Schneider/Indo Asian/C & S/Strandard/BCH/HPL

S&F MCB single pole, 240 volts of rating 6-32 Amps, breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge Make : Legrand / Schneider / ABB/ Havells

S&F MCB suitable for 6 to 32 Amps, 240 Volt AC supply single pole and neutral with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand/ GE/ Seimens/L&T/Indo Asian/C&S/ABB/BCH /Havells

S&F Decorative ultra slim linear LED lightening fixture, energy efficent 18 Watt complete all as specified and directed by engineer-in-charge.Make SYSKA/BAJAJ/PHILIPS/C.G/wipro

Supply and laying cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.00 sq mm 2 core complete all as specified and as directed by the Engr-in-charge.

M&l Protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class 'B' bricks complete all as specified and directed by Engr-in-charge.

M&L Local tibba dry sand cushioning for protection of cable complete all as specified and as directed by Engineer-in-charge. Note Local approved tibba dry sand after removal of vegetations, grass and other deleterious substances shall be used for sand cushioning.

M & L GI tubing light grade for protection of cables with pole/ in ground of size 40mm dia complete all as specified and as directed by Engineer-in-Charge.

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I complete all as specified and as directed by Engineer-in-Charge.

S&F Socket outlet 2 in 1, 3 pin, 5A ISI marked, complete all as specified and as directed by Engineer-in-Charge

Supply and fixing PVC fresh air fan (Exhaust fan) of size 250/300 mm sweep and connecting up including three core PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm wire from ceiling rose/connector to fan of length not less than 1.0 meter complete all as specified and directed. Make: - Usha/Bajaj/Havells

Supply ,laying, jointing and testing only of GI tubing medium grade 20mm bore with all fittings laid in trenches/floor etc complete

Supply ,laying, jointing and testing only of GI tubing medium grade 25 mm bore with all fittings laid in trenches/floor etc complete

Supply and laying in replacement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.00 sq mm 3 core complete all as specified and as directed by the Engr-in-charge.

Gill Construction Co

VIJAY KUMAR SHARMA