Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹54.3 L
EMD Value
₹1.1 L
Closing Date
25 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Avionics Division, Hyderabad
Avionics Division, Hyderabad
Civil works for up gradation of Northgate reception room, Security room, misc. works in fabrication hanger in HAL factory area
9469
HAL/HD/CE/T/24-25/20
Works
Accessories Complex- Avionics Divn-Hyderabad-Plant Maintenance
₹0
₹1.1 L
25 Sept 2024
4 Sept 2024
4 Sept 2024
25 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
GST NO.:
PAN No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.
TURN OVER IN Rupees
Pls Enter Turn over in Rs. for all the 3 years
ESI & PF Nos with proof (If any)
Related Document to be Uploaded to e-Procurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
80% (One Work)
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
Pls Accept The Delarication
DECLARATION II
Pls Accept the Delaration II
Description of item
Demolishing the existing cement plastered brick masonry/CRS/concete made in Cement mortar of any thickness/concrete as directed and sorting / stacking the useful materials from site including cost of tools, labour, transportationupto a lead of 500mts etc., all as directed by EIC.
Earth work excavation for foundation of retaining walls,columns,etc., depth not exceeding 1.50 m in hard dense soil, other than rock including dewatering if required, getting out and stacking the earth including cost of tools, labour, transportation etc,all as directed and specified by EIC.
Removing old Aluminum/wooden partitions including doors by carefully removing glass,Powder coated Aluminum members of different sections and boards of any description at any height / position and handing over the useful materials to stores including cost of all tools, labour all as directed by EIC
Providing and constructing brick work with best locally available frogged flyash bricks in CM 1:6 for walls at all levels and for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, chipping of existing brick walls / concrete surfaces where ever new walls are meeting in order to arrest cracks, applying cement slurry before constructing wall to have proper bond, necessary scaffolding, curing etc., complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.
Supplying,stacking and spreading approved quality morrum in layers not exc. 200mm thick including watering,ramming,levelling and proper compacting attain uniform & levelled surface by spraying water and keeping wheels wet during operation or plate vibrator whereever roller is not accessible, including hire charges of roller / vibrator,labour,cost of fuel,all other incidental charges,etc all as specified and directed by EIC.
Plastering external/internal brickwalls / concrete surfaces with C.M 1:4, 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding, at all heights,etc. at heights mentioned below including material,scafolding etc as directed by EIC.
Providing and laying plain cement concrete (PCC) 1:3:6 using 20mm down graded hard granite i.e. stone aggregate for foundation, floor etc., wherever required, at all depths including mixing, placing in position, proper compacting,formwork, curing, cost of all materials, labour, tools, transportation and all other incidental charges, etc., complete all as approved directed and specified by EIC
Providing and laying plain cement concrete (RCC) 1:1.5:3 using 20mm down graded hard granite i.e. stone aggregate for foundation, floor etc., wherever required, at all depths including mixing, placing in position, proper compacting,formwork, curing, cost of all materials, labour, tools, transportation and all other incidental charges, etc., complete all as approved directed and specified by EIC
Providing impervious coat plastering by rendering Cement mortar 1:3 (one part Cement :three parts coarse sand) over concrete / brick surfaces like ceiling, walls,terrace etc.by mixing with watreproofing chemical from Dr.Fixit/Fosroc/Sika as per manufactures specification finishing smooth and even, using trowel with all necessary scaffolding at all heights, etc., complete with rates including cost of all material, tools, labour, etc., all as directed and approved by EIC.(The cost of watreproofing compund will be paid seperately.)
Providing and mixing water proofing liquid of Dr.Fixit/Sika/STP/Fosroc in cement concrete/plaster for each 50kg work in doses by weight of cement as per manufacturer's specification including cost of tools, labour, tranasportation etc., at all heights complete all as approved /specified and directed by EIC.(Providing and mixing of waterproofing liquid for each 50kg of cement bag as per specification will be measured as 'EACH').
Supplying and fixing of Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing, labour,material,transportation etc. complete all as specified by EIC
Supplying and Fixing Glazed vitrified floor tiles polished finish of (KAJARIA / NITCO / JOHNSON) make of size 600 X 600 mm, 10mm thick, for floors of approved design and pattern fixed over CM 1:6, 20 mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 kg/sq.m or with laticrete of 6*8mm thickness of consistency as per manufacturers specification as directed and jointed with approved joint filler of matching colour / shade etc. complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.
Supplying and Fixing 18-20mm thick polished/semipolishedFlamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent for flooring and black galaxy for borders), texture and finish, jointed with cement slurry and pointed with cement mixed with pigment to match the colour, laid over a screed of Cement Mortar 1:4 (One cement : four coarse sand), 20mm average thickness including wastages,curing complete with rates including including rubbing, curing, finishing, providing holes of required diameter, providing opening to fix counter basins, cost of all material,labour,tools,transportation etc., complete all as approved, specified and directed by Engineer In Charge.
Removing the old ceramic/ vitrified floor tiles/dado/skirting of any thickness as directed by and sorting / stacking the useful materials and removal of debris to a lead of 1000 M includig cost of all tools, labour , transportation etc, all as directed by EIC .(Debris should be collected in a gunny bag and disposed safely)
Providing and applying on old surface of walls / ceilings, beams, columns, parapet walls, etc., including cornices, pilasters by sand papering, dustsing, brooming, scrapping, wahsing, rubbing down wherever required and applying Two coats of APEX ULTIMA exterior emulsion paint of Asian paints (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) or equivalent make of approved shade or as approved by EIC,with rate including cost of all materials, tools,labour ,scaffolding,wastage, etc., complete at all as approved, specified and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.
Terracota-Providing and applying Single coat of Terracota coloured paint of ASIAN Paints make or equivalent product from ICI / BERGER including cost of all materials, labour, scaffolding wastages etc at all heights as approved and directed by EIC.
Supplying and applying approved quality two coats to a approx 3mm thick wall care putty to walls(internal/external) surfaces from Asian paints/Wallplast/BIRLA make and carrying out punning to obtain smooth & even finish using EMERY paper 180 including cost of material, labour, wastage etc.,complete all as approved,all made good, specified and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.
Providing and applying on prepared surface and applying two coats of interior Plastic emulsion paint of Asian paints or equivalent make of approved shade over a coat of primer Asian paint or approved make with rate including cost of all materials, tools,labour ,scaffolding,wastage, etc., complete at all as approved, specified , all made good and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.The rates include for: (a) Use of all scaffoldings and cradles including hoisting and lowering.(b)Taking down, cleaning as directed and refixing blinds and fittings, picture rods, cornice poles and small items of builder’s hardware such as door knobs, finger plates, escutcheons, hooks etc. which are not required to be painted. (c) Use of dust sheets and other coverings for the protection of fixtures, fittings, furniture, etc. (d) Shifting of movable cupboards and furniture as required and replacing in position. (e) Work in patches (over one square metre each) including matching with existing work and marrying in at the edges. (f) Removing all splashes, drops, dirt, etc. and leaving premises in a clean state.
Supplying and Fabricating TMT (Fe 500 grade) reinforcement bars of all diameter, conforming to IS, for reinforcement in RCC works as per drawings, including cutting, bending, lapping, hooking, welding wherever required and placing in position with binding wires at all levels and position. Binding wire shall be of approved quality and of 16 SWG, complete with rates including cost of all material, labour, wastages, transportation charges etc., all as directed and approved by EIC.
Removing the existing MS/AluminiumWooden frame with shutters from doors including frame of approx. size 1.10 x 2.10m from plastered brick wall by chipping / cutting the holdfasts and handing over the useful material to stores within a lead of 200m (approx.) including cost of tools, labour, transportation , cleaning the site at all heights all as specified and directed by EIC.
Removing the existing M.S/Aluminium/Wooden frame with shutters from windows including frame from plastered brick wall by chipping / cutting the holdfasts and handing over the useful material to stores within a lead of 200m (approx.) including cost of tools, labour, transportation , cleaning the site at all heights all as specified and directed by EIC.
Providing and fixing ISI marked flush door shutters of 30 mm with view glass of 300mmx300mm thick including ISI marked Stainless Steel butt hinges with necessary screwsconforming to IS :2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters, including cost of tools, labour, transportation , cleaning the site at all heights all as specified and directed by EIC. (Flush shutter shall be got approved by the Engineer In Charge before placing order)
Supply and fixing 1st class best seasoned teak wood for door frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints and fixing with necessary hold fast screws, rawl plug etc., painting the including cost of applying a coat of chloro pyriophos emulsiable concentrate confirming to IS 8944 - 2005 as per manufacturers specification,polish, cost of all material, labour charges for fixing etc. complete for finished item of work as approved and directed by Engineer In Charge
Supply and fixing of decorative laminate of 0.9-1.00mm thickness of Greenlam or equivalent make, of surface finish, colour and pattern as approved fixed with approved adhesive on flush doors on both sides cost of all material, labour charges for fixing etc. complete for finished item of work as approved and directed by Engineer In Charge.
Supplying & Fixing 200 mm long aldrop made of aluminum of approved quality and make to the door shutters as directed, using necessary screws etc., including cost of all materials, labour, wastage etc., complete with rates including cost of all material, tools, labour, wastages etc., all as directed and approved by EIC.
Supplying & Fixing 150mm extruded aluminum handles with polished bright of approved quality and make to the door shutters as directed, using necessary screws etc., including cost of all materials, labour, wastage etc., complete with rates including cost of all material, tools, labour, wastages etc., all as directed and approved by EIC.
Supplying & Fixing 150mm Long aluminium barrel extruded section tower bolts of approved make and quality, to the door shutters as directed, using necessary screws etc., including cost of all materials, labour, wastage etc., complete with rates including cost of all material, tools, labour, wastages etc., all as directed and approved by EIC.
Supplying and fixing of extruded MS hinges with galvanised mild steel hinge pin,of 100mm and fixed,of approved make complete for all as specified and directed by EIC.
Providing half round nosing of edges of granite slab of 20 mm thick including polishing etc, complete as specified and directed by Engineer In Charge.
Providing & fixing false ceiling using ARMGYP vinyl laminated tiles of size 600mm x 600mm and 9mm thick with Aluminum foil backing and edges covered with film suspended from roof using G.I rod wire at every 0.6m interval on both ways with rawl plug and EXPOSED GRID of size 24mmx38mm of ARMSTRONG make or equivalent product from ST.GOBAIN / AEROLITE at a height of upto 3M height all as directed by EIC.
Supplying and fixing of 1 inch anti skid sticker over tiles/granite of approved colour and make complete for all as specified and directed by EIC.
Supplying and fixing in position(at any ht.& level) three track glazed Aluminium powder coated sliding windows with sections conforming to JINDAL catalogue including providing & fixing 4.8mm thick plain float glass of MODI/ SAINT GOBAIN make panel with steel mesh for one shutter of approved guage & opening all as per directions of EIC and as approved quality rubber/nylon gaskets, providing and fixing standard Aluminium 75mm handles locking arrangement, necessary wheel/rollers etc.,the windows shall be fabricated with Aluminium extrusions as described below of series B: a) Bottom member three track section 92 X 31.75 X 1.50mm b) Top & sides of 92 X 31.75 X 1.50mm. c)Shutter top & bottom 40X18X1.29mm d) Shutter interlock 40X27X1.29mm e) Shutter handle side 40X18X1.29mm complete along with as specified and as directed by EIC.[Gaps between wall/beam and Al. member shall be filled with silicon and made good.]
Providing, manufacturing and erecting Partly glazed and partly panneled Double / single leaf Aluminium door using standard anodized powder coated sections of JINDAL, HINDALCO make as detailed below all of approved make.(Including necessary screws,fasteners,cleats,rods etc.Specification for each shutter :-a) Bottom members -97.30 x 44.45x 2.15mm b) Top members - 47.62x44.45x1.95mm c) Side member - 47.62 x 44.45 x 1.82mm d) Middle member - 49.91 x 44.45 x 1.60mm; Door member of SL NO19566 of JINDAL e) 12mm thick pre laminated twin finish exterior grade of Novapan MFPB (PTX) - Superior grade or TESA / ASIS / ARCHIDPLY or any other particle board having ISI Mark or 12mm thick both side finished MDF boards f) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN make g) Rubber gaskets - Good quality of approved make h) Glazing clips - Weight of 0.097Kg/RM. I) Aluminium hinges 125mm long - 3Nos j) Aluminium handle 150mm long - 2 Nos. k) Concealed lock of make godrej/sheel 4 lever l) Aluminium tower bolts 200mm long - 2 Nos. m)Miscellaneous -Al. cleats, screws ,Door sealant,PVC push/pull stickers on glass. etc
Providing and erecting partly glazed and partly panelled powder coated Aluminium partition using standard sections of JINDAL or HINDALCO so that each pannel shall not exceed 1.20 sqm with 12mm thick pre-laminated board having twin finish of Novopan / TESA in bottom rows and 5mm thick float glass of MODI / ST GOBAIN on middle and top rows including glazing clips, rubber gasket for fixing the glass, filling gaps with silicon sealant etc. Aluminium members to be extended and fixed upto slab. Specification for aluminum sections to be used is a) Bottom members- 95.25 x 44.45 x 2.00mm is partition is erected from ground level b) Top / vertical members - 63.50 x 38.10 x1.95mm c)Middle memebers - 63.50 x 38.10 x 1.95mm .
Supplying and sticking UV protected sun control / frosted film having 25 micron thickness over glass panes of windows,partitions and doors including material,labour,wastage etc as directed by EIC.
Providing and fixing Aluminum body hydraulic Door Closer of designation No. 3 of Godrej/ Universal or equivalent make conforming to IS 3564 to the doors with necessary screws etc. complete as specified and directed by EIC.
Supplying and fixing non-skid ceramic floor tiles of 7-8mm thickness as per IS of size not exceeding 300 mm X 300mm of KAJARIA or JOHNSON or NITCO make of approved colour and design over a screed of CM 1:6 and 25mm average thick and pointing with white cement mixed with matching pigment etc including cost of all materials,labour,wastages,taxes etc as all as specified and directed by EIC.
Supplying and fixing Coloured Glazed Vertical cut Ceramic Wall tiles of 7mm thickness as per IS of size not exceeding 300mm X 450mm for dado of KAJARIA or JOHNSON or NITCO make, colour and design, over a screed of cement mortar 1:6 of 20mm average thick,fixed with neat cement slurry including hacking ,chipping the pointing with white cement mixed with matching pigment etc complete as approved, specified and directed by EIC.
Supplying and fixing light coloured glazed porceline European water closet (EWC) of Parryware / Cera/make of model no-C0297 confirming to IS: 2556 with 'P' or 'S' trap with or without vent set or equivalent in Hindware/Prayag make, including supplying and fixing 10 Ltrs capacity valve less syphonic action type PVC low level cistern confirming to IS: 774 with brackets, double flapped anti microbial seat cover confirming to IS: 2548 - Part 1 and 2, 40 mm dia PVC bend, 15 mm dia High density PVC inlet pipe connection, 15 mm dia CP angle stop cock with all above of approved make, colour etc. complete all as approved, specifed and directed by the EIC.
Supplying and fixing CP health faucet product from PARRYWARE / HINDWARE / CERA / Prayag make along with 1meter long flexible tube and wall hook complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.
Supplying and fixing 530 X 410 mm light coloured glazed porceline Indian Water Closet(IWC) (Orissa pattern) of Parryware make confirming to IS: 2556 with 'P' or 'S' trap with or without vent set or Hindware/Prayag or equivalent , including supplying and fixing 10 Ltrs capacity of dual flush valve less syphonic action type low level PVC cistern confirming to IS: 774, with brackets, 40 mm dia PVC waste pipe with coupling, 15 mm dia High Density PVC inlet pipe connection, 15 mm dia CP angle stop cock all above of approved make, colour, etc. complete as approved, specified and directed by the EIC.
Supplying and fixing 2 in 1 bib cock of Parryware make or in Hindware/CERA make or equivalent product all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.
Providing and fixing vitreous china urinal of Parryware Magnum model /Flat Back large Model-60002 from Hindware/ Cera make with C.I. Hangers, 32 mm C.P. brass urinal waste coupling , 32 mm C.P. Cast brass bottle trap,CP self closing push cock,CP spreader, and pipe to wall with C.P. flange including cost of necessary bolts, nuts, screws etc., complete including cutting and making good the walls and floors where required including the cost and conveyance of materials , Labour charges, incidental charges, taxes, duties, levies etc., as approved and directed by the Engineer In Charge for the finished item of work.
Supplying and fixing urinal partition/divisional plate made of glass from Jaquar make or equivalent product in PARRYWARE / HINDWARE / CERA / SOMANY with necessary SS brackets, screws etc.including cost of necessary bolts etc complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.
Providing and fixing C.P. Long body bib cock of Parryware make or in Hindware/CERA make or equivalent product rose 100 mm diameter with 15 or 20 mm inlet conforming to IS standards and weighing not less than 810 gms complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.
Supplying and fixing 15mm diaGI pipe B class of TATA / ZENITH make with G.I assorted fittings at all heights complying to IS 1239 and fixing in masonry with holder bat clamps chasing in the brick walls and embeddeing the G.I pipes and covering the same with CM 1:6 including cutting holes in any walls or PCC slab all as directed by EIC including all labour charges cost of all materials and fixtures.
Supplying and fixing 20mm diaGI pipe B class of TATA / ZENITH make with G.I assorted fittings at all heights complying to IS 1239 and fixing in masonry with holder bat clamps chasing in the brick walls and embeddeing the G.I pipes and covering the same with CM 1:6 including cutting holes in any walls or PCC slab all as directed by EIC including all labour charges cost of all materials and fixtures.
Supplying and fixing 25mm diaGI pipe B class of TATA / ZENITH make with G.I assorted fittings at all heights complying to IS 1239 and fixing in masonry with holder bat clamps chasing in the brick walls and embeddeing the G.I pipes and covering the same with CM 1:6 including cutting holes in any walls or PCC slab all as directed by EIC including all labour charges cost of all materials and fixtures.
Providing and fixing ball valve (brass) of 25mm approved quality, High or low pressure, with plastic floats complete including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.
Providing ,laying and fixing 110mm dia PVC SWR NAhani trap, plain with CP grating on top including jointing with solvent cement, rubber ring / gaskets etc., including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures ,solvent cement, rubber gasket, incidental charges, taxes, duties, levies etc., complete as directed and approved by EIC .
Providing ,laying and fixing 110mm dia PVC SWR drainage pipes fixed to walls, in floors including tees,bends,rubber rings,etc of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.
Providing ,laying and fixing PVC SWR vent cowldrainage pipes fixed to walls, in floors including tees,bends,rubber rings,etc of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.
Providing ,laying and fixing 200mm dia PVC SWR drainage pipes fixed to walls, in floors including tees,bends,rubber rings,etc of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.
Supplying and Fixing Glazed vitrified floor tiles polished finish of (KAJARIA / NITCO / JOHNSON) make of size 600 X 1200 mm, 10mm thick, for floors of approved design and pattern fixed over CM 1:6, 20 mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 kg/sq.m or with laticrete of 6 to 8mm thickness of consistency as per manufacturers specification as directed and jointed with approved joint filler of matching colour / shade etc. complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.
Providing and laying squared coursed rubble stone (CRS) masonry of approved size in CM 1:6 proportion for foundations and basement with splays and cutting built in proper bond, properly hearted, interstices filled with mortar and bond stones placed at every spacing of 1.5m in each course including leads, lifts, scaffolding, curing, and all other incidental and royalties operational charges etc. complete as directed by the EIC
Providing and fixing block board lipping 18-25 mm wide 2mm thick of required lenght at efges of doors/table to match the laminate including leads, lifts, scaffolding, curing, and all other incidental and royalties operational charges etc. complete as directed by the EIC
Supply and fixing of 25.00 mm thick BWP grade plywood sheets of GREEPLY / CENTURYPLY make for reception table including with two side decorative lamination of Century/Greenply make Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required,cost of all materials,labour,taxes,duties etc. complete as directed by Engineer In Charge for finished item of work for various sizes of wall panelling. (No deduction will be made for cutouts)
Supplying and fixing of Toughened glass 12 mm thickness of Saint Gobain/Modi make for corridor/sraircase/fixed waall/table with etching/plain design with HAL logo cost of all material,labour,tools,transportation etc., complete all as approved, specified and directed by Engineer In Charge.
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure with Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work including cutting of nipples after curing etc. at all heights,reserviors,terrace,elevation of building,beams,columns etc complete as per directions of Engineer-in-Charge.
Providing and removing centering / form work to RCC works for roof slab by providing MS shuttering plates over with MS Jack coupling supports with all required supports, struts, wedges, scafolder, bracings, ladder gangways, dressing with shuttering oil including MS bolts, nuts and washers, temporary openings for filtering for stop, chamfered edges, internal / external splayed, rounded edges or grooves for forming threading etc. for fair finished surface at any height/level complete with rates including cost of material,tools, labour, transportation etc., all as directed and specified by EIC.
Removing old damaged ESD/PVC flooring of any thickness sticked to concrete / Mosiac floor, stacking them in rolls and handing over to stores carefuuly with in a lead of 300m including cost of tools,labour,taxes etc all as directed by EIC.
Providing and laying conductive single layer homogenous ESD flooring with marbled surface pattern as per EN649 of ARMSTRONG (Royal LG1 ) make or equivalent product from TARKETT make including thermal welding including cleaning the surface, providing copper ribbons of 25mm width and 25micron thcikness along the joints forming a grid of 1.83m x 3.0m. The sheet should have thickness of 2mm, width of 1.83mts & length between 16 to 25mts with cost of all materials,wastages, labour,tools, adhesive etc all as directed by EIC.(The sheet should have residual indentation of 0.06mm as per EN 433, the color fastness > 6 as per ISO105-B02, vertical resistence < 1 x 107 Ohm as per EN1081 and the static electric charge 0.1 kV as per EN1815.The product should also confirm to class Bfi - s1 in flammability test as per EN 13501 - 1, slip resistence of R9 as per BGR 181, dynamic coefficient of friction with class DS as per EN13893. The wear group of sheet is P as per EN649 all asp per the directions of EIC.(Surface has to be cleaned,free from dust, ,fixing with adhesive, laying of ESD sheet has to be done with company authorized personnel, after laying testing has to be done to ascertain the parameters meet the company mention limits.)
Supply and fixing 2nd class best seasoned teak wood for frame work for wall panelling and door frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints and fixing with necessary hold fast screws, rawl plug etc., painting the including cost of applying a coat of chloro pyriophos emulsiable concentrate confirming to IS 8944 - 2005 as per manufacturers specification,polish, cost of all material, labour charges for fixing etc. complete for finished item of work as approved and directed by Engineer In Charge
Supply and fixing of Decorative Laminate sheet of 0.9 mm thick of DECOLITE / ROYAL TOUCH / GREEN LAM make or equivalent of approved quality and shade fixed with approved adhesive over flush doors / plywood cup boards/ frame work around doors,etc of approved design, sizes etc., including cost of all materials, labour, taxes, duties etc., complete as specified and directed by EIC.
Supply and fixing 12.00 mm thick BWP grade marine plywood sheets of GREEPLY / CENTURYPLY make confirming to IS 710 for making wall pannelling of approved design including fixing necessary harwdware fittings like hinges,Handles,locks,etc with rate including cost of all materials,labour,taxes,wastage,etc. complete as directed by EIC. Area of plywood used for cupboard shall be measured for payment.(Hardware require for cupboards shall be measured and paid seperately under relevant items)
Supplying, fabricating by welding and erecting M.S rolled structural members like I-Beams,channels , angles,M.S pipes, MS square pipes,pipes, chequered plate,plain flats etc in position as per the drawing by mechanical means of TATA, SAIL, RINL make conforming to IS specification including lifting,hoisting,fixing in position by welding at site,bolting and providing two coats of Synthetic Enamel over a coat of Zinc Chromate primer of ASIAN paints, ICI, BERGER or equivalent make all as specified and directed by EIC.The relevant code of procedure for rolled steel section dimensions, welding ,erection and hoisting and tolerances allowed shall be complied.
Supplying ,carrying to site all approved materials providing and fixing in position pre-painted / colour coated galvalume profile sheets for roof /wall clading (trapezodial pattern or matching with the profile of existing roof sheeting) of 0.50-0.63 mm thick.(Total coated thickness),550 Mpa minimum,yield strength ,It shall be coated with hot dip alloy of 55% aluminium 43.50 % zinc 1.50 % silicon and finished with resin coat on both surfaces@275 gm/sqm of coating (Total both surfaces) having overall width & laid width as specified & shall be fixed using , the self drilling self tapping screwes shall be of required size as per site condition and the screws shall be fixed at suitable intervals as per standards procedure and direction of EIC. The contractor has to provide screw caps suiting the matching colour of sheet to avoid corrosion due to weather action and to give asethetic look. The make of screws shall be from HILTI,CORROSHIELD & BUILDEX.Penetration & side as well as end laps in sheet shall be sealed by using butyl sealant taps and silicon sealant.HDPE fillers shall be provided wherever required to close voids between sheets,sheet & fasteners etc,necessary overlaps as per manufacturers specification shall be provided. Make-JINDAL, JAPAN METAL, INTERARCH, BHUSAN, METECO, KIRBY.all complete as per direction of EIC.
Supplying and fixing of FRP sheet of 1.5mm thickness of approved shade and colour with required fittings transportation, labour etc.,complete all as specified and as directed by EIC.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
scopeCE20.pdf
TENDER_DOCUMENT • 0.01 MB
TBCE20.pdf
TENDER_DOCUMENT • 1.88 MB
ChecklistofDocuments.pdf
TENDER_DOCUMENT • 0.02 MB
NITCE20.pdf
TENDER_DOCUMENT • 0.29 MB
ProformaA.pdf
TENDER_DOCUMENT • 0.01 MB
ProformaB.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureL.pdf
TENDER_DOCUMENT • 0.01 MB
coveringletterEMD.pdf
TENDER_DOCUMENT • 0.01 MB
PROCESSDOCUMENTFORSBICOLLECT.pdf
TENDER_DOCUMENT • 1.18 MB
EFTmandateform.pdf
TENDER_DOCUMENT • 0.01 MB
PQCE20.xlsm
TENDER_DOCUMENT • 0.03 MB
AnnexureI.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureIIB.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureIIC.pdf
TENDER_DOCUMENT • 0.01 MB
pricebidCE20.xlsm
TENDER_DOCUMENT • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .