8365/E8

Amount

Taking down of Submain wiring of any size and type of wire complete all as specified and as directed.

Taking down unserviceable rusted/ damaged MCB DBs of any type and any capacity including making good to the disturbed surfaces to walls as per existing one complete all as directed by Engineer-in-Charge. Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit.

Supply and fix Sheet metal enclosure Metal Door/ Double door for DB's where MCBs to be used 4 way single pole and neutral with 200 amps rated bus bar complete all as specified and as directed. Make:- L&T Cat Part No. DBSPN004DD or Make:- Legrand cat part No.5076 10 or C&S Cat Part No. CSDBSPNPEDD04 .

Supply and fix Sheet metal enclosure Metal Door for DB's where MCBs to be used 8 way single pole and neutral with 200 amps rated bus bar complete all as specified and as directed. Make:- L&T Cat Part No. DBSPN008DD or Make:- Legrand cat part No.5076 01 or ABB Cat part No. 1SYI011608C0001 or Make:- C&S Cat part No.CSDBSPNPEDD08.

Supply and fix Sheet metal enclosure Metal Door for DB's where MCBs to be used 12 way single pole and neutral with 200 amps rated bus bar complete all as specified and as directed. Make:- L&T Cat Part No. DBSPN012DD or Make:- Legrand cat part No.5076 12 or ABB Cat Part No.1SYI011612C0001 or Make:- C&S Cat part No.CSDBSPNPEDD12 .

Supply and fix Sheet metal enclosure Metal Door for DB's where MCBs to be used 4 way Tripple pole and neutral with 200 amps rated bus bar complete all as specified and as directed. Make:- L&T Cat Part No. DBTPE004DD or Make:- Legrand cat part No.5076 70 or ABB Cat part No. 1SYI0215004C0001 or Make:- C&S Cat part No.CSDBTPNHPDD04.

Supply and fix Sheet metal enclosure Metal Door for DB's where MCBs to be used 8 way Tripple pole and neutral with 200 amps rated bus bar including taking down old unserviceable DB complete all as specified and as directed. Make:- L&T Cat Part No. DBTPN008DD or Make:- Legrand cat part No.5076 72 Make:- ABB Cat part No.1SYI021608C001 or Make:- C&S Cat Part No.CSDBTPNHPDD08.

Supply and fix MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve braking capacity 10 kA as directed by the Engr-in-Charge. Make:-L&T Cat part No. BB10060C to BB 10320C or Make:- Legrand cat part 408587 to 408595 or Make:- C&S Cat Part No.CSMBS1C6 to 32 or Make:- ABB Cat Part No. SH201M-C6 to C-32.

Supply and fix in repairs MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve braking capacity 10 kA as directed by the Engr-in-Charge. Make:-L&T Cat part No. BB10060C to BB 10320C or Make:- Legrand cat part 408587 to 408595 or Make:- C&S Cat Part No.CSMBS1C6 to 32 or Make:- ABB Cat Part No. SH201M-C6 to C-32.

Supply and fix MCB 40 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge. Make:-L&T Cat part No. BB20400C or Make:ABB Cat Part No. SH202M-C40 or Make:- Legrand cat part 408637 or Make:- C&S Cat Part No.CSMBS2C40.

Supply and fix in repairs MCB 40 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge. Make:-L&T Cat part No. BB20400C or Make:ABB Cat Part No. SH202M-C40 or Make:- Legrand cat part 408637 or Make:- C&S Cat Part No.CSMBS2C40.

Supply and fix MCB, 63 Amps, TPN 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge. Make:-L&T Cat part No. BB30630C or Make:-ABB Cat Part No.SH203M-C63NA or Make:- Legrand cat part 408683 or Make:- C&S Cat Part No.CSMBS3C63N.

Supply and fix RCCB, DP, sensitivity 30mA, 2 Module, 240 Volts, 40 Amps complete all as directed by the Engr-in-Charge. Make:-L&T Cat part No.AURAD204003 or Make:-ABB Cat Part No.DS201M C40 AC30 or Make:- Legrand cat part 411853 or Make:- C&S Cat Part No.CSRB2P40A30.

Materials and labour Sub main wiring with 2 runs of single core PVC insulated FRLS grade, unsheathed stranded copper conductor of size 4 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor of size 4 Sqmm FRLS grade as earth lead drawn in and including PVC casing caping of suitable size including all fittings and taking out old unserviceable sub main wring including PVC casing caping complete all as specified and as directed. Note:- Two run 4 Sqmm main conductor and one run of 4 Sqmm earthing conductor and one run of PVC casing caping shall be measured as one unit.

Materials and labour Sub main wiring with 2 runs of single core PVC insulated FRLS grade, unsheathed stranded copper conductor of size 6 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor of size 6 Sqmm FRLS grade as earth lead drawn in and including PVC non metallic rigid conduit , ISI marked of 25 mm dia including all fittings complete all as specified and as directed. Note:- Two run 6 Sqmm main conductor and one run of 6 Sqmm earthing conductor and one run of PVC conduit shall be measured as one unit.

Materials and labour Sub main wiring with 2 runs of single core PVC insulated FRLS grade, unsheathed stranded copper conductor of size 10 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor of size 10 Sqmm FRLS grade as earth lead drawn in and including PVC non metallic rigid conduit , ISI marked of 32 mm dia including all fittings complete all as specified and as directed. Note:- Two run 10 Sqmm main conductor and one run of 10 Sqmm earthing conductor and one run of PVC conduit shall be measured as one unit.

Repairs to Building main panels through carrying out checking all electrical connections including incoming and outgoing Under ground cables of any size including lugs, busbar, voltmeter, ampmeter, cable glands, insulator on busbars and tightning all these connections properly with proper size of nuts, bolts and washers as per existing size and taking out all serviceable cables from panels and refixing the same with necessary realignment and new MS clamps as per existing one providing insulation of busbar with colour code insulation tape including replacement of old unserviceable worn out MCCB & MCB and preparation of internal and external surfaces by cleaning with dry cloth and remove dust particles by using air blower and scratching the old painted surfaces as directed and painting with two coats of synthetic enamel paint over a coat of red oxide primer and writing panel board No. with synthetic enamel paint and repairs to existing foundation with PCC type B1(1:2:4, using 20mm graded crushed stone aggregates) and apllying 15 mm thick rendering in cement mortar 1:4 and two coats of cement based paint over a coat of primer of any colour/ tint as directed including testing of panel board complete all as directed by Engineer-in-Charge. Note:- MCCB & MCB shall be measured and paid separately as under.

Supply and Only MCCB 4 Pole, 250 amps, 36kA, 415V with thermal and magnetic release, adjustable type including taking down old unserviceable one complete all as specified and as directed. Make:- L&T Cat part No.CM92109OOP1OG or Make:- Legrand cat part No.6690 72 or Make:- C&S cat part No.CSCN250TM*4P.

Supply and Only MCCB 4 Pole, 200 amps, 36kA, 415V with thermal and magnetic release, adjustable type including taking down old unserviceable one complete all as specified and as directed. Make:- L&T Cat part No.CM92109OON1OG or Make:- Legrand cat part No.6690 71 or Make:- C&S cat part No.CSCN250TM*4P..

Supply and Only MCCB 4 Pole, 125 Amps, 36kA, 415V with thermal and magnetic release, adjustable type including taking down old unserviceable one complete all as specified and as directed. Make:- L&T Cat part No.DZ1F0100DXD1A or Make:- Legrand cat part No.669739 or Make:- C&S cat part No.CSE1NN125ATM4P.

Supply and Only MCCB 4 Pole, 100 Amps, 36kA, 415V with thermal and magnetic release, adjustable type including taking down old unserviceable one complete all as specified and as directed. Make:- L&T Cat part No.DZ1F0100DXD1A or Make:- Legrand cat part No.669738 or Make:- C&S cat part No.CSE1NN100TM4P.

Supply & Fixing in replacement aviation obstruction light comprising of aluminium housing with polycarbonate enclosure including dismantling and taking down existing unserviceable/worn out aviation light from RCC over head tank of height of 21.0 Mtr complete in all respect as specified and directed. Make:- Cat part No BJAV 302 of Make- BAJAJ or equivalent model as specified in PS

Taking out old unserviceable LT XLPE cable of any size and description complete all as specified and as directed.

Supply and fixing XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 35 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs through existing GI pipe etc including connection complete all as directed by the Engr-in-Charge.

Supply and fixing XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 10 Sqmm 2 core in duct/floor/wall with provision of saddle and lugs through existing GI pipe etc including connection complete all as directed by the Engr-in-Charge.

Supply and fix GI strip of size 32 x 6 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as directed including taking out old unservicaeble one.

Supply and fix as in repair Air termination aluminium single pointed rod 12 mm dia, 300 mm long complete all as specified and as directed.

Supply and fix in repair test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8mm dia 25mm long hex head screw complete all as specified and as directed.

Materials and labour Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 Cm girth complete all as specified and as directed.

Supply and fix Changeover switch in sheet steel enclosure, 4P, 250 Amps manual type 415 Volts including taking down old unserviceable one complete all as specified and as directed. Make:- L&T Cat part No.CO32500OSOO or Make:- C&S cat part No.E-CSCS250NM4CO. or equivalent model from make:- Schneider / ABB.

Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I including taking out of old unserviceable earth pit with all accessories complete all as specified and as directed.

Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strips 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I including taking out of old unserviceable earth pit with all accessories complete all as specified and as directed.

K.P Construction Co

MS JYOTI INDUSTRIES

Rounaq Enterprise

M/S J S ENTERPRISES

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION

JOY-EN-JOY

G D TRADERS