Provn of Qty-02 HIgh Mast Seucurity Light at Ferozepur under GE (AF) Bhisiana

Amount

Excavation in trenches not exc 1.5 m wide and not exceeding 1.5 m depth for foundation laying of cables etc and getting out in soft loose soil all as specified and directed.

Returning filling including spreading leveling watering and well ramming in layers n.exc 25 cm in soil completed all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point as in soil complete all as specified and directed.

M&L dry river sand as in sand cushioning to under ground cable including punning down all as directed.

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed.

S&F XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 50 sqmm 4 core , connecting with proper lugs and cable glands all as per specified and directed by Engr-in Charge.

M&L earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected to and including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC slab 50mm thick in cement concrete (1:2:4), type B-1, reinforced with welded steel wire fabric or XPM, (weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade, wire mesh and lugs, GI protection pipe, 15mm dia, light grade, 7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed.

M&L for making bore below the road for crossing the GI pipe light grade 40 mm dia for cable protection and fill the putty on both sides of the GI pipe after crossing the armoured cable to avoid the water inside complete all as specified and dricted by Engineer-in-Charge.

S&F GI tubing 40mm bore light grade galavansied with all fitting complete for cable protection under road crossing/on pole/wall or similar position all as specified and dricted by Engineer-in-Charge.

S&F new generation LED flood light with high luminous efficiancy 200 W with IP 65 protection with front toughened glass complete all as specified and directed.

S&F 4 pole MCCB 63 Amps capacity 50Hz 415 volts with rupturing capacity 16 KA complete all as specified and directed by Engineer-in-Charge.

S&F 15 mtrs high mast light continuosly tapered cross section high mast as per details specified and given:- (a) Suitable for flood lights LED luminous 08 Nos, 200 Watt LED lights complete suitable for operation on 230V, 50Hz AC supply. (b) 1/2 section having suitable sectional length with slip joints between sectional length with slip joints with sections without any water proof cover. (c) Raising/lowering type lantern carriage designed to carry 08 Nos luminaries, contrail gearbox, junction box and pully assemble with water proof cover. (d) Necessary suitable length for lowering & raising of lantern carriage of stainless steel wire ropes of 7/19 construction (with minimum 6mm dia) and multi core flexible copper power cable. (e) Hinged service door in base section base plate earthing terminal. (f) Suitable arrangement for supply distribution with termination of suitable size underground cable in high mast. (g) Complete with other provision for execution in the confirmation with detailed technical specification as provided by Manufacturer. (h) Double drum winch with separate handle for manual operation of winch with a torqe limiting devices for safe docking of carriage. (i) Lighting conductor final made of 25mm dia 300mm long GI tube having single prong. (j) Integral single power tool (electric) for lowering & raising of high mast (k) Anchor plate, templetes, foundation bolts manufactured from special steel alongwith nuts washers etc. (l) Design & casting of RCC foundation suitable for erection of high mast upto 15 mtrs as per manufactures recommendation considered safe soil bearing capacity including supplying and casting.

Rasvinderpalandco

M/s Luxmi Constructions