Automization of drinking water supply at A and B and C and D Apartments phase 1 in central Township and SOQ FMD HAL Bangalore

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Cancelled cheque leaf to be uploaded)

PAN No.:

Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs:

Please Enter Turn over in Rupees for all the 3 years

ESI No.:

GST Detail:

Please Enter GST Details

Related Document to be uploaded in ePortal

Contact details

Please Enter Contact person Name

Please Enter Mobile No

Valid Electrical contractor license of appropriate voltage (Minimum 650V) issued by any state Govt. under clause 45 of Indian Electricity Rules 1956 or as amended from time to time or to declare engage an electrical contractor who has the above mentioned licence and requisite experience.

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued within a period 12 months from the final date of submission of tender.

Please Enter Details to 'Name of the Bank' , 'Date of Issue','Value in C89``Rs. in Lakhs

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender should be either of the following: [Work completion certificates along with LOA/PO/WO should be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No II

work done

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No III

Details of person holding the power of Attorney :

Related Document to be Uploaded to eProcurement Portal

Please Enter Details for Person holding Power of Attorney

DECLARATION I

Please Accept the Declaration I

DECLARATION II

Please Accept the Declaration II

Subject tender has been called on item rate basis. Basic Rate to be quoted for each item.

Subject work is a Works contract and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.

Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

The payment terms shall be governed as per the terms indicated in General conditions of contract.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings and quote accordingly. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

Specification of item

Supply , installation & testing of Water level Sensor for each overhead tank and underground sump as per the break up provided under technical specification and programming with PLC which is measured separatley at BOQ sl no:3 complete in all respect and as directed by EIC.

Supply and installation of DPT Sensor( preferably of range from 0-4 bar) on existing GI water header and programming with PLC which is availabe in the VFD panel complete as per specification in all respect and as directed by EIC.

Supply,fixing, programming, testing and commissioning of terrace panel comprising of PLC Controller with Input/ Output module and the required network switch (Schneider make/other equivalent make) complete in all respect and and as directed by EIC. Note: for details technical specification to be refered.

Supply,installation ,programmingand commissioning of Motorized valve with feedback signal (butterfly valve / ball valve ) as per site requirement) for 32-50mm dia GI pipe complete in all respect and as directed by EIC. Note:The number of valves and scheme of fixing valve for each tank to be refered in technical specification.

Supply , instlaltion, testing and commisioning of VFD's panel for 2nos of 10HP pumps with Programme logic Conroller and HMI, for controlling including programming. Note: For details technical specifications to be refered.

Supply , instlaltion, testing and commisioning of VFD's panel for 2nos of 7.5HP pumps with Programme logic Conroller and HMI, for controlling including programming : For details technical specifications to be refered.

Supply & laying of 6C x 1.5 Sqmm Cu UnArmoured control cable for sensors.Cables to be laid in PVC conduit /HDPE pipe as per site condition.PVC conduit and HDPE pipe will be measured separately.

Supply, laying & termination of 5C x 1.5 Sqmm Cu UnArmoured control cable for valves.Cables to be laid in PVC conduit /HDPE pipe as per site condition.PVC conduit and HDPE pipe will be measured separately.

Supply & Laying of 3C x 1.5 Sqmm Cu UnArmoured control cable for power.Cables to be laid in PVC conduit /HDPE pipe as per site condition.PVC conduit and HDPE pipe will be measured separately.

Supply & drawing/laying of Cat-6 LAN cable in the existing conduit including termiantion of same using RJ 45 jacks on PLC/Network switch as per site requirement and technical specification

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm PVC Conduit

25 mm PVC Conduit

32 mm PVC Conduit

Supply and laying of 63mm dia, PE-100 , PN8 ISI marked HDPE pipe confirming to IS 4984:19955 including suitable jointing using welding as required in the excavated trench/duct/ on roof /at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge.

Supply and laying of 25 mm dia Class-B GI pipe in excavted trench/cable duct etc including necessary joining accrssores as per site requirement compelte in all respect and as directed by EIC

Excavation All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan). Including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil.

Refilling the same soil and disposal of surplus excavated soil as directed, with in a lead of 50m.

Demolishing Cement Concrete manually/machanical means including disposal of material within 50 metres lead as per direction of Engineer in charge

Providing 1:2:4 cement concrete using 20mm graded aggregate including curing etc. and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level:

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required

Supplying and laying 25 mm X 5 mm G.I. strip at 0.50 meter below ground as strip earth electrode including connection/terminating with G.I nut, bolt, spring washer as required.

Supply, installation, testing & commissioning of 10A DP MCB C CURVE 10 KA breaking capacity With sheet metal Enclosure. The enclosure should be IP 54 complete with two coating of enamel paint over one coat of primer.

Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 3 1/2X25 sqmm size XLPE insulated Aluminum conductor 1100V gr., earthed Armoured (Arm)U.G cables as directed and as per technical specification. (Note:- Excavation, concrete cutting, reconcreting, casing pipes as required will be measured separately.)

Supply and connecting indoor type cable end joints for the 3 1/2X25 sqmm size 1.1 KV gr., Aluminum conductor XLPE insulated armoured (Arm) LT UG cables by employing necessary glands, terminals, bolts & nuts etc., complete in all respects