TN-05/EE/2025-26 Work of renovation of canal service road between Km 3.400 to Km 4.800 of Rajwaha Pooth.(Lot-7)

Amount

Uprooting junds

Scraping upper surface both side of road to remove earth / silt up to 5 cm.

Water Bound Macadam Grading - 3 Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming. stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405.

Brick on Edging both side of the road all labour, T&P etc complete & as per directed by the Engineer-in- charge. (As per PWD SOR wef 01.05.25 Ch no 04, item no 4 Page No 13 )

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 to 1.0 kg/sqm using mechanical means as per Technical Specification Cause (S.I.No- 502)

Providing and applying tack coat with Bitumen VG-10 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per technical specification Clause 503.

Providing. laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying Paver Finisher Hydrostatic and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be follawed by seal coat of Type C as per Technical pecification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specifed levels, grade and cross fall using Type C as per Technical Specification Clause 510.

Earth work in filling for repair of ruts, cuts, pote holes, depressions and strengthening of bank by power tranported earth with a lead beyond 200m. and upto 1.00 Km including excavation, loading, unloading, manual compaction and dressing of the surface upto the required level & slope and all lift etc. complete

Prroviding and laying oi hot app ied rhermoplaslic compound 2.5 mm thick incllding refleclorising glass beads @ 250 gms persqm area, thickness 01 2.5 mm is exclusive of surface app ied glass beads as per IRC:35-2015 .The llnished surface to.be level, uniform and lree ffom steak and holes. Rates are inclusive of all taxes, royally, etc. all T&P/machine materiat and labour required forproper completion of work.

VIJAY LAXMI ASSOCIATES (BID ID -5603371)