REPAIR/MAINT OF E/M WORKS AND B/R WORKS IN SUB STATION BUILDING AND OTHER WORKS AT VARIOUS LOCATIONS UNDER GE E/M LUCKNOW

Amount

Taking down chowkhats or frame (wooden/aluminium) n. exc. 1.5 Sqm each with shutters (with out taking off shutters from the frame) and taken as credit complete all as specified and directed by Engineer-in-Charge.

Taking down shutter only exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutter only n. exc 1.0 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames (wooden/aluminium) with shutters without taking off shutter from the frames exc. 1.5 but n. exc 4 sqm each complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified and directed by Engineer-in-Charge.

S&F Bands, straps, clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good complete all as specified and directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications& drawing complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, supplying and fixing in frame at site as per specification and drawings shown in section 8 of SSR part -II complete all as specified and directed by Engineer-in-Charge.

M&L 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified and directed by Engineer-in-Charge.

30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides , complete all as specified and directed by Engineer-in-Charge.

M & L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded , complete all as specified and directed by Engineer-in-Charge.

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed by Engineer-in-Charge.

S&F 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed by Engineer-in-Charge.

S&F 100mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed by Engineer-in-Charge.

S&F 150mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 100mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 300mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed by Engineer-in-Charge.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass panes of any thickness, size ,quality or description from wooden frames , glazed with putty or fixed with beads in repairs complete all as specified and directed by Engineer-in-Charge.

S&F glass pan ordinary quality 3mm thick and glazing with oil putty/ wooden beads in square n. exc 0.5 m each pane complete all as specified and directed by Engineer-in-Charge.

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane complete all as specified and directed by Engineer-in-Charge.

S&f for 4.8 mm thick sheet glass ordinary qulity and glazing with neosprene beading exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15 cm thick (above or below ground level) complete all as specified and directed by Engineer-in-Charge.

M&L 75mm th PCC 1:3:6 type C-2 as in sub base, Paving, plinth protection, finished even and fair complete all as specified and directed by Engineer-in-Charge.

M&L for Hardcore with broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

M&L non-skid coloured ceremic tiles 300x300x7 mm in flooring, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed bed in cement mortor 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3 complete all as specified and directed by Engineer-in-Charge. (Note : Screed bed will not be measured and paid separately)

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. at any height complete all as specified and directed by Engineer-in-Charge.

All as per item no 32 above but on ceiling surfaces.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L rendering 10mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L rendering 10mm thick on ceiling in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of Oil bound distemper over a coat of cement based white wall care putty average thickness 3mm thick including preparation of newly plastered surfaces complete all as specified and directed by Engineer-in-Charge.

M&L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed by Engineer-in-Charge.

Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying two coat of white wash complete all as specified and directed by Engineer-in-Charge.

All as per item No 39 above but on ceiling.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Preparation of new surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying two coat of synthetic enamel paint over and including primer complete all as specified and directed by Engineer-in-Charge.

Preparation of old painted surfaces of bricks,stone,concrete, asbestos cement or plastered surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L applying two coats of Apex ( Asian Paint) / Weather coat (Berger) over old painted surface including preparation of wall surface complete all as specified and directed by Engineer-in-Charge. (Note:- Rate included for working upto 25m height from ground level, necessary safety precautions of workers and their insurances, contractors will ensure proper safety precaution of workers during the work, nothing will be paid extra )

M&L applying two coat of cement base paint on old decorated wall surfaces including preperation of surfaces, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing 15 mm bore and connections complete all as specified and directed by Engineer-in-Charge.

All as per item no 47 above but 20 mm bore

M & L Mild steel galvanized steel tubing medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

All as per item no 49 above but 20 mm bore

S&F in repair 15 mm dia bib tap cast copper alloy(fency type), chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stop valve, cast copper alloy, fancy type,chromium plated screwed down both ends for high pressure (concealed type), as per ISI suitable for 15mm dia iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm white, with front or back inlet with integral foot rests including connections to trap, and to flushing pipe, antisyphonage pipe, etc (excluding flushing cistern and flush pipe) complete including making good to floor complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china urinals, flat back of size 465mmX355mmX265mm, white with grating and union for discharge pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 32 mm bore flexible pipe of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP mild steel gratings suitable for 75/100 mm dia NT/ FT complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Chromium plated Brass Tubular towel rod, of 24" (60 cm long) complete all as specified and directed by Engineer-in-Charge.

Dismantling PVC water tanks exc 250 ltr but n. exc 500 ltr capacity and removing to store complete all as specified and directed by Engineer-in-Charge.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

S&F 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC OHT tanks complete all as specified and directed by Engineer-in-Charge.

M&L 18-20mm thick machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L 18-20mm thick machine cut kota stone slab as in skirting/riser over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and complete and 10mm thick screed bed in CM 1:3 complete all as specified and directed by Engineer-in-Charge.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engineer-in-Charge.

Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6.0 m mean radius built in cement sand mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M & L for Cement concrete Type D2 1:4:8 (using 40mm graded stone aggregates) as in foundations, filling and mass complete all as specified and directed by Engineer-in-Charge.

S&F mild steel TMT bars 8mm dia and over ,cut to length , bent to shape requred, including cranking , bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

M & L for Providing precast cement concrete Type B1 1:2:4 (using 20mm graded stone aggregates ) as in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. and setting in mortar complete with joints to match complete all as specified and directed by Engineer-in-Charge.

M&L 18-20 mm thick granite stone slab , bedded over screed bed and jointed in cement mortar to match the colour of slab as in flooring , polishing and grinding complete all as specified and directed by Engineer-in-Charge. (Note : Screeding bed shall be measured and paid separately)

M&L for exterior grade outdoor coloured floor/wall tiles (heavy duty) of tactileseries of size 300x300x15mm of Make Johnson endura or equivalent make bedded over and including 20mm thick screed bed in CM 1:6 and jointed in cement mortar to match the colour of slab as in flooring complete all as specified and directed by Engineer-in-Charge.

Demolition of Concrete(reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

M&L Chequered cement concrete coloured tiles 20 cmx20cmx20 mm thick with coloured cement and pigment , set, jointed and pointed in neat cement slurry over 20mm thick screed bed in CM 1:4 as in floors complete all as specified and directed by Engineer-in-Charge. (Note : Screed bed will not be measured and paid separately)

M & L for Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 40mm thick sand layer including filled interstices complete all as specified and directed by Engineer-in-Charge.

M & L for cement concrete type D 2, 1:4:8 (40mm graded aggregate) 75 mm thick as in sub base of floor complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

Dismantling post or struts (wood/steel or rcc) any section incl taking out embedded portion and making good distrubed on normal ground in concrete, brick works masonary complete all as specified and directed by Engineer-in-Charge.

M&L for dismantling fencing wire mesh any type complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out returing filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in soft soil etc complete all as specified and directed by Engineer-in-Charge.

M&L for type C2 1:3:6 (40 mm graded aggregate) cement concrete in foundation and mass concrete etc complete all as specified and directed by Engineer-in-Charge.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engineer-in-Charge.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed by Engineer-in-Charge.

S & F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed by Engineer-in-Charge. (Note : each line wire to be measured)

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagonal or squre nut exc 5 cm long but n.exc 10cm long dia of neck in 11 to 15mm etc complete all as specified and directed by Engineer-in-Charge.

M & L for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc., and similar work conforming to Fe-290 Gde E-165 fixed in repair, complete all as specified and directed by Engineer-in-Charge.

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete con- forming to Fe.290.Gde-E-165, complete all as specified and directed by Engineer-in-Charge.

S & F for mild steel plain sheet 1.25 mm thick as in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed by Engineer-in-Charge.

M & L for cement concrete type B1 , 1:2:4 mix using 20 mm graded aggregate as in kerb stones and similar articles with plain faces including formwork complete all as specified and directed by Engineer-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Aluminium Anodised aluminium partition with 12mm thick prelaminated particle board at bottom panel and 5.5.mm thick glass on top panel including glazing clip and neosprene rubber beading as in repair , complete all as specified and directed by Engineer-in-Charge. Note: Rate of Glass and 12 mm thick prelaminated particle board shall be included in the rate quoted by the contractor against above item.

M & L for Aluminium anodised double leaf door shutter side hung type without sash bar 44.45mm thick (two panels) fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail 150mm and middle rail 115mm including jointing cleats, screws, aluminium anodised fittings such as pair of 'D' type handle (decorative type), tower bolts 150mm long 2 Nos for each shutter, 100mm size butt hinges, aluminium beading snap type, PVC packing, locking arrangement with mortice lock of best quality, in and including 4.80 mm thick tinted glass with necessary beading / packing and necessary fitting & fixtures ,floor Door spring ISI marked steel body ,including taking down old existing unserviceable door, complete all as specified and directed by Engineer-in-Charge.

M & L for Aluminium anodised single leaf door shutter side hung type without sash bar 44.45mm thick (two panels) fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail 150mm and middle rail 115mm including jointing cleats, screws, aluminium anodised fittings such as pair of 'D' type handle (decorative type), tower bolts 150mm long 2 Nos for each shutter, 100mm size butt hinges, aluminium beading snap type, PVC packing, locking arrangement with mortice lock of best quality, in and including 4.80 mm thick tinted glass with necessary beading / packing and necessary fitting & fixtures ,floor Door spring ISI marked steel body ,including taking down old existing unserviceable door, complete all as specified and directed by Engineer-in-Charge.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair, complete all as specified and directed by Engineer-in-Charge.

Repairing of existing aluminium door single leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 5-12 mm glass and making the door and shutter serviceable , complete all as specified and directed by Engineer-in-Charge. Note :Floor door springs where renewed shall be measured and paid separately under appropriate item.

Repairing of existing aluminium door double leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 5-12 mm glass and making the door and shutter serviceable complete all as specified and directed by Engineer-in-Charge. (Note : Floor door springs where renewed shall be measured and paid separately under appropriate

S&F anodised Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 2 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thickness complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets , complete all as specified and directed by Engineer-in-Charge.

Providing and fixing of E-board 'Everest' make 600x600x4mm thick white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24 mm wide T-section/Angle section , complete all as specified and directed by Engineer-in-Charge.

Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coats, complete all as specified and directed by Engineer-in- Charge.

S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per, complete all as specified and directed by Engineer-in-Charge.

S & F for 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site, complete all as specified and directed by Engineer-in-Charge.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed by Engineer-in-Charge.

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete con- forming to Fe.290.Gde-E-165, complete all as specified and directed by Engineer-in-Charge.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering in ridges made to any shape or semi circular cladding to wall, fixed with self tapping screws in and including demolition of old unservicable sheet/ridge, complete all as specified and directed by Engineer-in-Charge.

Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws in and including demolition of old unservicable sheet/ridge, complete all as specified and directed by Engineer-in-Charge.

S & F for 2mm thick Fibre glass reinforced translucent plain or corrugated sheeting with 100 mm lap fixed with coach screw and washer etc. complete all as specified and directed by Engineer-in-Charge.

M & L for Welded steel wire fabric supplied and fixed complete to wood or steel members(not exc 4 Kg/sqm) as in repairs including dismantling of old unserviceable wires, complete all as specified and directed by Engineer-in- Charge.

M & L for Welded steel wire fabric supplied and fixed complete to wood or steel members( exc 4 Kg/sqm) as in repairs including dismantling of old unserviceable wires, complete all as specified and directed by Engineer-in- Charge.

M & L for Hard drawn steel wire fabric (n. exc 4 Kg/Sqm) cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt, complete all as specified and directed by Engineer-in-Charge.

Demolition of existing roof treatment of any type complete all as specified and directed by Engineer-in-Charge.

M & L 15mm thick screed plaster on RCC slab CM 1:4 with using water proofing compound @ 3% by weight of cement, complete all as specified and directed by Engineer-in-Charge. (Note : WPC to be measured and paid separately)

M & L for water proofing treatment on roof surfaces in the following manner:- (a) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg/sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr/sqm. (b) supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10 cm & 15 cm end lap weinghing not less than 3.5 kg/sqm.

M&L 230X115X40 mm thick machine pressed brick tiles with minimum thickness of joint (n.exc.) & are throughly filled with water proof polymer based joint mortar over 20 mm thick CM 1:3 complete all as specified and directed by Engineer-in-Charge.

M&L applying one coat of aluminium paints over new or previously untreated surface of any description, over 10cm in width or girth,not otherwise described including preparation complete all as specified and directed by Engineer-in-Charge.

M&L for cutting the tree branches any type / shape / thick, over the building/near the building /sorrounding the installation etc including removal all debris and make the surrounding clear for working complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed by Engineer-in-Charge.

M&L Point wiring One light/fan point controlled by one way switch 6 amps 240 volts with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, MS box 1.6 mm thick with hylum sheet 3 mm thick (approved colour) suitable size for switches, sockets, fan regulator etc for the following :- Note - (i) Colour code of cable Phase-Red Neutral- Black and Earth -Green) (ii) MS box painted with two coat of synthetic enamelled paind and over coat of red oxide both side.

All as per item No 121 above but One 3 pin 6 Amps switch socket out let point on independent Board

All as per item No 121 above but One 3 pin 6 Amps switch socket out let point on same board

M&L Point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 2.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, MS box 1.6 mm thick with hylum sheet 3 mm thick (approved colour) suitable size switches, sockets 16 Amps, 240 volts :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green) (ii) MS box painted with two coat of synthetic enamelled paind and over coat of red oxide both side.

S&F switch piano flush type single pole, one way 6 Amps 240 ISI marked etc complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 2 in 1, 3 pin 5 A flush type ISI marked 240 volts ISI marked etc complete all as specified and directed by Engineer-in-Charge.

S&F switch socket combination 2 in 3 pin 5 and 15 Amps flush type ISI marked universal suitable for 240 volts etc complete all as specified and directed by Engineer-in-Charge.

M&L for ceiling rose with three terminal as per relevant IS complete all as specified and directed by Engineer-in-Charge.

Supply and fix decorative box type fitting with blue colour end cap for LED tube 20 watt luminaire for 230 volt AC incl LED tube 20 watt complete all as specified and directed by Engineer-in-Charge.

Supply & fix decorative box type fitting with blue colour end cap for LED tube 10 watt luminaire for 230 volt AC incl LED tube 10 watt complete all as specified and directed by Engineer-in-Charge.

S&F stepped type fan electronic fan regulator flush type ISI marked on the existing fenolic laminated sheet etc complete all as specified and directed by Engineer-in-Charge.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed by Engineer-in-Charge.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way TPN suitable for MCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed by Engineer-in-Charge.

S&F MCB single pole ISI marked `C' series working on 240 Volts 50 HZ AC supply for out going controlling cercuit of capacity 6-32 Amp breaking capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge.

S&F MCB single pole ISI marked `C' series working on 240 Volts 50 HZ AC supply for out going controlling cercuit of capacity 40-63 Amp breaking capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge.

S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming controlling system of capaicty 40-63 Amps 10 KA breaking capacity etc complete all as specified and directed by Engineer-in-Charge.

S&F MCB triple pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity etc complete all as specified and directed by Engineer-in-Charge.

M&Lfor sub main wiring with two single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor FRLS cable drawn into and including suitable size non metalic rigid pvc conduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor FRLS cable as earth wire of the 2x6.0 sqmm + 1x6.0 sqmm earth wire size complete all as specified and directed by Engineer-in-Charge.

S&F LED flood light 150 watt IP66 high power flood light with pressure die cast aluminium housing complete all as specified and directed by Engineer-in-Charge (Balast Pen)

S&F decorative post top lantern for 360 C indirect light resistant to impact and corrosion, Glare free and better uniformity IP-65 protection miliky version with all accessoreis complete all as specified and directed by Engineer-in-Charge.

M&L new generation energy saving and environmental friendly long life 45 W LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded pc cover having top opening separate driver compartment with IP 66 protection of IK07 in taking old one etc complete all as specified and directed by Engineer-in-Charge.

Renewal of existing earthing (GI plate earthig) with provision of new layers of charcoal and salt all as specified in electrical plate No 3 of SSR Part-I, including cleaning of existing GI earth plate, strip/wire etc and connecting with new bolts, nuts and washers complete and testing on completion in all respect complete all as specified and directed by Engineer-in-Charge. Note: - Excavation, PCC for earth pit and cover, watering pipe, funnel with wire mesh, earth lead and protection pipe shall be measured and paid separately.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out for earthing and earth lead complete all as directed in any type of soil complete all as specified and directed by Engineer-in-Charge.

All as per item No 143 above but depth exceeding 1.5 and not exceeding 3 metres

Returning, filling in and including spreading, levelling, watering and well ramming in layers n. exe 25 cm each in any type of soil complete all as specified and directed by Engineer-in-Charge.

Removing in excavated material to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

S&F in repair CI funnel made as specified in SSR Part -I electrical plate No 3 fixed with fixed with GI pipe of watering by welding or threading etc complete all as specified and directed by Engineer-in-Charge.

S&F galvanised steel tubing 20 mm bore light grade with all fittings in earthing for watering the earth including taking down of old steel tubing complete all as specified and directed by Engineer-in-Charge.

S&F galvanised iron strip as earth continuity conductor or main earthing lead fixed to walls or burried in ground of size 32x6 mm complete all as specified and directed by Engineer-in-Charge.

M&L for pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, earth pit cover as per existing size including necessary formwork complete all as specified and directed by Engineer-in-Charge.

M&L for Earth pit chamber PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle as specified in SSR 2009 Part I Electrical Plate No 3 incl taking out brocken pits and deposited as directed place and marker made out of 1.6 mm thick ms plate (30x30 cm size,welded with 12 mm dia round ms bar incl painting with one coat of red oxide primer and two coat of synthetic enameld paint and writing the earth pit no and result as directed hight letter etc complete all as specified and directed by Engineer-in-Charge.

M&L for earthing with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to galvanized iron wire 4mm mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 15 mm dia GI light grade earth lead protection pipe, complete all as specified and directed by Engineer-in-Charge. Note : (i) Main earthing lead from earth plate electrode to test point upto length of 7.50 mtr shall deem to be included in the unit rate quoted by the tenderer against this item. (ii) GI protection pipe and earthing strip beyond 7.5 mtr long shall be measured and paid seperatly . (iii) Test result should be less than 1 ohms or satisfaction of user. (iv) Charcoal and salt should be 60 kg and 100 kg respectively .

Supply and fixing fire retardant electric insulation synthetic mat INSULATICA 2000" for 11 KV 3.0 mm thick +10% conforming to BIS DOC No ETD -02 (5231) P dt 2003. meeting requirement of IS 3043, IS: 5216 (Part 1,2,3) IS : 8437 and IEC 479 pub-1 IEC 61111 & 61112 tested for brake down strength tensile /elongation ageing properties. Insulation resistance, affects of acid , alkaline, Diesel & transformer oil, leakage current test fire test etc. having min width of 1000m + 20 mm complete as required suitable and using adhesive and allied chemical and scaling of all joints and border ends and fixing decorative taps the installed sheet complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair heavy duty exhuast fan 600 mm, 900 rpm turbo force model three phase incl all accessories as per manufacturer norms incl suitable size 4 core pvc insulated unseathed copper cable cable from ceiling rose to connector of fan etc complete all as specified and directed by Engineer-in-Charge. Make -Havells/Usha/khaitan/Orient

Supply and fix in repair heavy duty exhuast fan 450mm, 900 rpm turbo force model single phase incl all accessories as per manufacturer norms incl suitable size three core pvc insulated unseathed copper cable from ceiling rose to connector fan fan etc complete all as specified and directed by Engineer-in-Charge. Make -Havells/Usha/khaitan/Orient

M&L rewinding of exhaust Fan of 600/450mm sweep and ceiling fan 1200 mm sweep of any make with super enameled copper wire (gauge/weight of copper coils shall be same as per existing dismantled fans), including varnishing,heating and replacement of capcitor & 3 core cable from ceiling rose to connector of equipment complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair ceiling fan 1200mm sweep with all accessories as per manufacturer norms incl 3 core copper cord from ceiling rose to connector of fan etc complete all as specified and directed by Engineer-in-Charge. Make -Havells/Usha/khaitan/Orient

Supply flood light 30 watt LED flood light engergy saving, environmental friendly long life exclusive innovative die cast aluminium alloy flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix LED driver suitable for LED light fitting 36 to 45 watt any height etc complete all as specified and directed by Engineer-in-Charge. Make- As per sample Make -C&S/Crompton or equivalent approved by GE

Supply only LED driver suitable for LED light fitting 100 watt any height etc complete all as specified and directed by Engineer-in-Charge. Make- As per sample Make -C&S/Crompton or equivalent approved by GE

Supply only LED driver suitable for LED light fitting 120/150 watt at any height etc complete all as specified and directed by Engineer-in-Charge. Make- As per sample Make -C&S/Crompton or equivalent approved by GE

Supplying, fixing in repair maintenance free tubular battery suitable for solar light, 12 volts, 110 AH or equivalent as per existing including initial charging (Make- EXIDE / AMRON ) and connction and testing complete all as specified and directed by Engineer-in-Charge.

Servicing of solar light and solar battery after taking down unserviceable solar light and battery from pole and refixing the same after repair and filling the destile water in battery as required on site etc complete all as specified and directed by Engineer-in-Charge. Note. Driver and cable will be measured and paid respective items

M&L for spray the chemical (roundup) in the permises of the sub station in the ratio 1:3 for burning the grasses at every three months complete all as specified and directed by Engineer-in-Charge.

Cleaning the sub station in side and out side building/fencing/two/four pole structure ,and also aroun 2 m radius out side the fencing every three month duly taking out unwanted material grass/vegitable/roots of tree/small tree etc complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out the unserviceable battery from battery bank any capacity supply and fix new lead acid maintenance free battery 2 volt 100 AH (HBL Make) or as per existing make/model/capacity including connecting of all battery in battery bank and testing upto satisfaction of engineer - in-charge complete all as specified and directed by Engineer-in-Charge.

S&F recess/surface/suspended mounted LED 36 watt slim ceiling light with extruded aluminium housing and milky diffuser incl cutting the suitable size ceiling and 3 core flexible cord from ceiling rose to connector of fitting etc complete all as specified and directed by Engineer-in-Charge.

M K Engineers and Contractors

PUMA POWER

Mount International