e-Proc/EWFMHL_23062022/ PD_IIEST/508

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]. Average run 8 mtr

On Board

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x 100x 65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supplying and fixing 32 A, 415 V, 4P MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.

Supplying and fixing 4 way MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of4x84/0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC as ECC in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. and mending good damages to original finish by using own tools and tackles.

Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. and mending good damages to original finish by using own tools and tackles.

Supply and fixing of 450 mm sweep wall mounting A.C Fan (Make Orient Cat No- 450 mm Tornado Wall II )

Suuply and fixing of 1400 mm sweep A.C ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.(Orient PSPO summer cool)

Supply & fixing essential LED tube 20W(cat No.- 865 T8 IND I-2100 lm (make Philips)

Supply fixing of 1200 mm LED Batten. Philips make , (Cat No- TMC-501P1x TLED 22 W P3241)

Supply fixing of 1200 mm LED Batten. Philips make, (Cat No- TMC-501P2x TLED 22 W P3242)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc including supplying sockets, tape for .2.5sqmm.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tape for 4 sqmm.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tape for 6 sqmm.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of 30 cm (12")

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for 30 cm (12") Exhaust fan

Supply only of heavy duty 1420 rpm 300 mm sweep Exhaust Fan. (EPC make/ Eqivlent)

Supply only 1.1 Kv Grade XLPE 4 core 35 sq mm Al Ar cable

Supply only 1.1 Kv Grade XLPE 4 core 25 sq mm Al Ar cable

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 4 core upto 25 sqmm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 4 core upto 35 sqmm.

Finishing the end of 4 core 25 sqmm cable XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

Finishing the end of 4 core 35 sqmm cable XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

Supplying and fixing double door Vertical TPN MCB (Legrand) Distribution board (8-Way) for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with accessories as below. Incommer 125 Amps 4Pole MCCB (Legrand) -01 nos. Outgoing Feeder 63A, TP MCB -2 nos, 32A, TP MCB -4 nos, 6-32 A SP MCB -6nos

Supplying and fixing 6-Way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with accessories as below. Incomer; 63 A, 4P Isolator (Legrand)- 1 nos. Outgoing Feeder: 63 A, DP Isolator (Legrand)- 2 nos, 6-32 A SP MCB(Legrand)- 12 nos.

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with accessories as below. Incomer; 63 A, DP Isolator (Legrand)- 1 nos. Outgoing Feeder: 6-32 A SP MCB(Legrand)- 12 nos.

Supplying & Fixing GI waterproof type looping cable box size 200x 150x 100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting.

Supply only 1.1 KV grade XLPE Al,Ar Cable of 2 core 10 Sq mm (Glowstar,Polycab)

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 2 core upto 10 sqmm.

Supply and fixing MicroRex analog time switches (Legrand) Cat Nos - 4127 90 with 2 nos 25A 2 NO Contractor (Legrand) Cat No- 412544 with 25 Amps SP MCB (Legrand) with necess connection cu wire as required which fixed in (2+6) way SPN MCB DB(Legrand) concealed in wall as req.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials for 2 core 10 sqmm cable.

ULTRA ELECTRICALS AND ELECTRONICS

ATLAS ELECTRIC