Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹21.8 L+₹5.3 L (32.5%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid | |
| 3 | L3₹23.5 L+₹7.0 L (42.8%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bid |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
19 Aug 2020, 6:00 pmClosed
Garrison Engineer (West) Jalandhar Cantt
Garrison Engineer (West) Jalandhar Cantt
As described in Bill of quantities
2020_MES_356791_2
GE/JAL(W)-25/2020-21
Open Tender
Civil Works
Item Rate
365 days
Jalandhar Cantt
As per Tender Documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (West) Jalandhar Cantt
₹48,000
Yes
28 Aug 2020
28 Jul 2020
21 Aug 2020
28 Jul 2020
19 Aug 2020
7 Aug 2020
Amount
CHARPOY GI PIPE WITH NYLON NEWAR Supply & fixing for 1.88 metre long rail made out of 32mm dia. GI pipe medium grade ISI marked duly threaded both ends and including taking out old unserviceable long rail from the existing GI charpoys frame complete all as specified and as shown on drawings & as directed by the Engineer-in-Charge. (Drawing No. - FD-220) Make of Long Rail of GI Pipe : Jindal/ Oswal/ Tata/ Prakash/ BST/ Bhushan.
Fixing only, 0.815 metre long, short rail made out from old long rail 32mm dia GI pipe retrieved from Srl item No 01 here-in-before including cutting and threating both ends & fixing in position to the entire satisfaction of the Engineer-in-Charge and including taking out old unserviceable short rail from the existing GI charpoy frame complete all as specified and shown on drawings and as directed by the Engineer-in-Charge. (Retrived long rail will be issued free for making short rail) (Drawing No. - FD-220)
Fixing only 0.410 metre long leg made out from old short rail 32mm dia. GI pipe retrieved from srl item No 02 here in before including cutting and threading both ends & fixing in position to the entire satisfaction of the Engineer-in-Charge and including taking out unserviceable leg form the existing GI charpoy frame complete all as specified and shown on drawings & as directed by the Engineer-in-Charge. (Retrieved short rail will be issued free for making leg) (Drawing No. - FD-220)
Supply & fixing for GI elbow 3 way duly threaded (ISI marked) suitable for 32mm dia. GI pipe charpoy including taking out old unserviceable elbow from the existing GI charpoy frame complete all as specified and shown on drawings & as directed by Engineer-in-Charge. (Drawing No. - FD-220)
Supply & fixing GI check nut duly threaded suitable for 32mm dia. GI pipe charpoy including taking out old unserviceable check nut from the existing GI Charpoy frame complete all as specified and as directed by Engineer-in-Charge. (Drawing No. - FD-220)
Supply & fixing for mild steel clamps for MNF set made out of MS flat 25mm x 3mm fixed to GI leg including necessary welding and made to shape as required complete all as specified and as shown on drawings & as directed by the Engineer -in-Charge. (Drawing No. - FD-220)
Material and labour for reweaving of GI pipe charpoy with nylon newar (White colour as per sample held in GE office of first quality (of make Evershine or Usha) 50mm to 55mm wide of weight not less than 1.50Kgs per Charpoy, 15x35 band would be closely woven, Nylon newar to be taken over the frames, inter woven, making two layers spearately and the adjustment of Nylon Newar shall closely woven against each other and shall be pulled tightly (Weaving pattern) closely knit shall be followed for both and bottom layers of newar including taking/cutting out old unserviceable Newar from the existing GI charpoy frame and preparation of frame after tightening loose joints including any threading required for tightening of GI pipe charpoy to the entire satisfaction of the Engineer-in-Charge.
CHAROPY HARD TOP Supply & fixing Plywood 12mm thick commercial 1980mm x 900 mm BWR ISI Marked as specified and directed by Engineer-in-Charge. Make of Plywood : Green Ply/ Dura Ply/ Kit Ply/ Archid.
Supply MS flat iron 900mm x 40mm x 5mm duly painted with one coat of red oxide over a one coat of synthetic enamelled black paint as specified and directed by Engr-in-Charge.
Supply & fixing counter shunk head nut & bolt steel with washer 60/65 mm x 6mm to fix the plywood top as specified and directed by Engineer-in-Charge.
Drilling for re-hole to Charpoy GI pipe 32 mm dia on existing hole to fix the nut and bolts as specified and directed by Engineer-in-Charge.
Supply and fixing for mild steel bottom plate welded to bottom of leg made out of MS sheet 3mm thick including connected pieces and necessary welding all around the bottom plate with leg and made to shape as required complete all as specified by Engineer-in-Charge.
Supply and fixing of PVC seat in place of canning area of chair dinning including cutting and removing of old unsv cane from the frame with making proper fitting of PVC seat to the wooden frame complete all shown on the drawing, specified and as directed by the Engineer-in-Charge. (Drawing No. FD-203, 209, 16, 279 & 1105 etc)
Material and labour for recanning of chair dinning. The canning shall be done in GODREJ PATTERN with half round plastic cane 2mm to 2.5mm wide and for border 3mm wide cane plastic including cutting and removing of old unserviceable cane from the frame complete all shown on the drawing, specified and as directed by the Engineer-in-Charge. (Drawing No. FD-203, 209, 16, 279 & 1105 etc) Make of cane : Shah Plastic/Premier /Gola
Material and labour for recanning of chair easy. The canning shall be done in GODREJ PATTERN with half round plastic cane 2mm to 2.5mm wide and for border 3mm wide cane plastic including cutting and removing of old unserviceable cane from the frame complete all shown on the drawing, specified and as directed by the Engineer-in-Charge. (Drawing No. FD-229, 201, 17, 281 & 1108 etc) Make of cane : Shah Plastic/Premier /Gola
Material and labour for recanning of chair writing. The canning shall be done in GODREJ PATTERN with half round plastic cane 2mm to 2.5mm wide and for border 3mm wide cane plastic including cutting and removing of old unserviceable cane from the frame complete all shown on the drawing, specified and as directed by the Engineer-in-Charge. (Drawing No. FD-202, 20, 275, 280, 360 & 1107 etc) Make of cane : Shah Plastic/Premier /Gola
Material and labour for preparation of old steel surface of Chair verandah complete and applying one coat of synthetic enamel paint (White) all shown on drawing, spfd and as directed by Engr-in-Charge. Make of Synthetic Enamel Paint: Asian, Shalimar, Nerolac, Berger, Johnson & Nicholson (1st quality) (Drawing No. FD- 19, 256 & 259 etc)
Material and labour for recanning of chairs varandah with and including cane plastic 4mm wide half round complete including cutting and removing of old unsv cane/newar of chairs verandah all shown on drawing, specified and as directed by Engr-in-Charge. Make of Cane : Shah Plastic/Premier/ Gola (Drawing No. FD- 19, 256 & 259 etc)
Material and labour for providing PVC shoes of best quality including removing of old UNSV PVC shoes from chair steel varandah complete all as specified and as directed by the Engr-in-Charge. (Drawing No. - FD- 19, 256 & 259 etc)
M.R. ENTERPRISES
M/S CHAWLA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .