Construction of Boundary wall of EVM Warehouse in D.M Compound Sahjahanpur

R.C.C work in Slab with1:1.5:3 cement c/sand: Stone grit with all material T&P

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Sunshades DSR No 5.3A

R.C.C. with 1:1.5:3 cement c/s & s/g 20mm i/c all complete DSR No 5.2.2

First Class bricks works in 1:4 cement and coarse sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 230mm wall including providing scaffolding rope, c DSR No 6.4.1

R.C.C. with 1:1.5:3 cement c/s & s/g 20mm i/c all complete DSR No 5.1.2

S/Fixing of Europion pan Complete. DSR No 17.3.1

First Class bricks works in 1:4 cement and coarse sand mortar in plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 230mm wall including providing scaffolding rope, c DSR No 6.1.1

Cement concrete with 4 cm. gauge approved stone, ballast, approved coarse sand and cement in the proportion of 1:4:8 cement c/sand including supply of all material labour T&P etc. complete DSR No 4.18

S/Fixing of Orissa pan Complete. DSR No 17.1.1

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Double leaf D DSR No 9.21.1

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. DSR No 2.27

Filling of B/Bats In pit

S/F Wash Basin all Complete. DSR No 17.7.4

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. DSR No 22.7.1

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete DSR No 11.46.2

Providing and laying 8 to 10mm thick ivory or light shade Vitrified Tiles of 600x600 mm size in flooring laid with 1:3 cement mortar (1 cement :3 course sand) finishing with cement slurry and with pigment grouting & polishing complete i/c supply of all material, labour T&P required for proper completion of work. DSR No 11.41.2

P/F of Angle iron with Concertina wire DSR No A.R

First Class bricks works in 1:4 cement and coarse sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 115 mm wall including providing scaffolding rope, c DSR No 6.13.2

Supply and fixing of 6,(1/4") china white Glazed Tiles in flooring or in skriting or dado laid wih 1:3 cement and approved course sand mortar finished with white cement slurry jointing and polishing complete including supply for all material labour and T&P etc. required for proper completion of the work. DSR No 11.37

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc without base Concrete. complete. (40 mm thick) DSR No 11.3

Column DSR No 5.9.6

Suspended floors, roofs, landings, balconies and access platform DSR No 5.9.3

S/F of long body bib cock 15mm dia DSR No 18.51

Lintels, beams, plinth beams, girders, bressumers and cantilevers DSR No 5.9.5

S/F of angle valve 15mm dia DSR No 18.53

20mm. Plaster in 1:2 C/Cs mortar with ncf

P/F of oxidised/Aluminum fitting with screw for door and window

20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR No 13.6.1

15mm thick In side Plaster with 1:6 cement f/sand mortar including labour material T&P etc. complete DSR No 13.5.2

Earth Work excavation in foundation DSR No 2.2.1

Column Footing DSR No 5.9.1

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter DSR No 12.41.2

12mm thick plaster with 1:4 cement, c/sand DSR No 13.4.1

S/F of CPVC Pipe 25mm dia. DSR No 18.9.3

12mm thick Out Side Plaster with 1:6 cement c/sand mortar including labour material T&P etc. complete. DSR No 13.4.2

Providing and injecting for precontructional Anti termite treatment and creating a chemical barrier under and around the column pitswall trenches basement excavation top surface DSR2023- (2.35.3) Guard Room (2.86X3.01) m = 8.61 Sqm + Toilet (1.17X1.23) m = 1.44 Sqm

6/10mm thick ceiling Plaster with 1:3 cement c/sand mortar including labour material T&P etc. complete DSR No 13.16.1

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. DSR No 12.22

S/F of CPVC Pipe 20mm dia. DSR No 18.9.2

S/F of P.V.C Pipe 75 mm Dia. DSR No 12.41.1

S/F of CPVC Pipe 15mm dia. DSR No 18.9.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (Wood Work). DSR No 13.62.1

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. DSR No 2.25a

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work DSR No 13.41.1

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soil DSR No 2.6.1

Painting with two coats Enamel paint on Steel surface over one coat red oxide primer DSR No 13.48.3

Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR No 13.46.1

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR No 13.8

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm bend DSR No 12.42.5.2

P/F ISI factory marked steel glazed door /windows and ventilators side top centre hug with beading and all members such as f7D,F4B,K11B/Tubular section mm etc complete of standard rolled steel section joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fxing of hinges pivots including priming coat of approved steel primer but excluding the cost of other fitting complete all as per approved design fixing with 15x3mm lugs 10cm lonng embedded in cc block 15x10x10cm in 1:3:6 DSR No 10.11.1

P/F 40x40x5 Angle iron door frame for doors,window and ventilators of Mild Steel Tee section,jointed mitred and welded including fixing. DSR No 10.31

Steel cutting, Bending, Binding & Placing i/c all complete. DSR No 10.31

MS Iron Gate Supply and Fixing Angle Iron Gar with Bottom Rail (7.00 m x 2.50 m) of Holdfast with 1:2:4 P.C.C DSR No 10.31

S/Fixing of MS Angle Iron Board above Gate i/c all complete. DSR No 10.31

P/F 40x40x5 Angle iron door frame for doors,window and ventilators of Mild Steel Tee section,jointed mitred and welded including fixing. DSR No 10.31

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 2.1.1 All kinds of soil DSR No 2.1.1

PVC Waste Pipe 32 mm Dia DSR No 17.28.2

Mild steel or iorn in plain work such as reinforced concrete or reinforced brick work (when not included in as over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks. DSR No 5.22.6

Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. DSR No 18.21.1

Providing and Fixing of Glass Strips in joints of terrazo/cement concorete floors a)40mm wide and 4mm thick DSR No 11.13

Making Drip Corse with 1:2 cement c/sand mortar DSR No 5.3

Providing and fixing 100 mm C.I/S.S grating DSR No 17.29

S/F of PVC Water Storage Tank. (1 No) DSR No 18.48

Please Enable Macros to View BoQ information