Repair Replacement of plumbing sanitary fitting joinery and allied works in Charari N2 Road Subhash Road, JK and Kajikhera Complex at AFS Chakeri Kanpur

Amount

S&F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union reducer etc suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union reducer etc suitable for 20 mm bore pipe complete all as specified and directed.

S&F in repairs internal flushing kit of PVC low level flushing cistern and making functional complete all as specified and dircted .

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish from out of MD land complete all as specified and directed.

M & L for 7 to 8 mm thick non skid ceramic coloured tiles (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc laid over and including 15 mm thick screed bed in CM (1:6) including jointing in neat cement slurry and pointed in coloured cement to match with shade of tiles complete all as specified and directed.

M& L for 7 to 8 mm thick glazed coloured ceramic tiles on vertical surfaces of size 300 mm x 450 mm or as required size at site in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM (1:4) on fair faces of brick work / concrete surfaces complete all as specified and dierected

M&L 18 mm thick for marble work (table rubbed and polished ) in cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of any shade other than white and black over and including 15 mm thick screed bed in cm (1:6) layer for laying floor finishes including rounding edges complete all as specified and directed.

S&F in repair 15 mm bore steel tubing medium grade , galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in floors including cutting threading and making forged bends on pipes MS hooks etc at any position (i.e concealed) complete all as specified and directed.

S&F in repair 20 mm bore steel tubing medium grade , galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in floors including cutting threading and making forged bends on pipes MS hooks etc any position (i.e concealed) complete all as specified and directed.

Cutting chases, pinnng in, iin brick walls making good to faciing where required and pointing in cement mortar (1:3) for concealed water tubing, and crossing one side of wall to another side by cutting or drilling exceeding 10 cm but not exceeding 50 cm girth complete all as specified and directed.

S&F in repair gun metal globe or gate valve for 15 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair gun metal globe or gate valve for 20 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and as directed.

S & F in repair curtain rods of Chromium plated mild steel conduit pipe having 20 to 25 mm dia with wall thickness 1mm including chromium plated bracket holders for holding of rods and fixed with screws to pelmet boxes/wall etc complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces etc complete all as specified and directed.

M & L for 15 mm thick plastering on fair faces of brick wall or concrete surfaces in CM (1:6) finish even and smooth without using extra cement and applying two coat OBD including applying 1 to 2 mm thick wall care putty over the plastered surfaces complete all as specified and directed.

M&L for 5 mm thick plastering on ceiling in cement mortar (1:3) finished even and smooth without using extra cement including 3 coat of white wash over newly plastered surface complete all as specified and directed.

S&F in repairs 1.0 mm thick sinks made of stainless steel sheet as in kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC low level dual flush cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.Make Prayag cat Part No 502 DUO or equivalent make in Cera/Nirali/Blue Star as approved by GE in writting.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern of size 580 mm x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to disturbed surfaces excluding flushing cistern and flush pipes complete all as specified and directed .

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm / 900 mm long complete all as specified and directed.

S&F in repair aluminium anodised tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed .

S&F in repair 32 mm waste coupling of PTMT half or full threaded min minimum wt not less than 45 gm complete all as specified and directed .

S&F in repairs 40mm CP waste coupling for steel sink complete all as specified and directed .

S&F in repairs PVC waste pipe 32/40 mm dia, 800 mm long, complete all as specified and directed, Make :- Cat No 3271 Prayag or equivalent make as specified in Appx of PS.

S&F in repair 125mm/ 150 mm dia PTMT grating with or without waste hole fixed on floor trap / nahni trap with white cement complete all as specified and directed

S&F in repair vitreous china wash basin white round back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets all as specified and directed by Engr-in-charge.

Demolition of brick work built in cement mortar in any position not otherwise described complete all as specified and directed.

M & L for brick work with fly ash bricks straight or cuved on plan exceeding 6.0 m mean radius built in CM (1:6) using of old size bricks complete all as specified and directed.

Labour only for brick work with sub class 'B' brick straight or curved on plan not exceeding 6.0 m mean radius built in CM (1:6) complete all as specified and as directed. (Old serviceable brick obtained from item No-06.00 above).

S&F in repair of 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minmum weight 142 gms).complete all as specified and directed

S&F in repair of 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minmum weight 210 gms).complete all as specified and as directed

S&F in repair 500 ltr rotatational moulded polyethylene, white colour, water storage tanks (cylindrical vertical with closed top) of triple layered construction, fixing arrangement to screwed the lid cover, ISI mark hoisted and fixed in position complete all as specified and directed

S& F in repairs pillar taps 15 mm dia of PTMT any colour scewed for iron pipe ans fixed (Min Wt 110 gms).complete all as specified and directed.

S&F in repairs stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 gms) complete all as specified and directed.

S&F in repairs angle stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 gms) complete all as specified and directed.

S&F PVC lid for water storage tank suitable for 500/ 1000 ltr capacity complete all as specified and directed.

S& F in repair MS bracket/angle iron for kitchen sink/WHB and as fixed in CM (1:3) or in PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate complete all as specified and directed.

S&F in repairs 15 mm dia Bib tap standard of PTMTof any colour screwed for iron pipes (Min Wt 90 gms), complete all as specified and directed. .Make-Prayag,Cat NO-123-C or equivalent make in Cera/ Nirali /Blue Star as approved by GE in writting.

S&F in repair 15 mm bore Swivel shower of PTMT any colour for fixing with15 mm pipe .(Minimum weight 40gms) complete all as specified and directed.

Cleaning and removing all scale and dirt,etc from tanks and from mouths of circulating pipes, etc capacity exe 250 lt but nexe 500 lt,complete all as speified.Note-Date of cleaning should be mentioned over each tank by synthetic enamel paint complete all as specified and directed.

S & F single side prelaminated solid PVC door frame of size 50 mm x47 mm made out of 5 mm thick colour PVC sheet reinforced with MS tube complete all as specified and directed.

S & F factory made both side prelaminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail, panelling of double side prelaminated PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

S & F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S & F 150 mm long Aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F aluminium handles extruded type, anodised of 125 mm size complete all as specified and directed.

S & F in repair 100 mm long aluminium anodized hasp & staple safety type with mild steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed

S & F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as speficied & directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples complete all as speficied & directed.

Hacking out old broken glass (any size, quality or description) from wooden or steel frames glazed complete all as specified and directed.

S & F 3.50 mm thick plain/frosted sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane upto 12th storey complete all as specified and directed.

Taking down chowkhat or frame not exceeding 1.50 sqm with shutters (wihtout taking off shutter from frame ) etc complete all as specified and directed.

Ditto all as per above item No.24.00 here-in-before and not exceeding 4.00 Sqm but exceeding 1.5 Sqm.

Taking down shutter not exceeding 1.0 Sqm complete all as specified and directed.

Taking down shutter exc. 1.0 Sqm and not exc.2.0 Sqm complete all as specified and directed.

S & F plain solid straight chowkhat or frame rebated on the solid rounded or chmferred put together with glue pinned at joints in 2nd class HW complete all as specified and directed.

S & F 35 mm thick IInd class HW factory made glazed and skelton door shutters open rebated and prepare to receive glass/gauge etc, without sash bars, edges of framing plain chamfered or rounded, fitted without mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.24 (a) complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 100 mm size but hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F in repair 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F in mild steel helical door spring 150 mm ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F in repair mild steel helical door spring 150 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F 250 mm long, mild steel sliding door bolt stove enameled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F in repair mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed

S & F 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F in repair 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S & F in repair 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

Taking down steel chowket or frame with shutters (wihtout taking off shutter from frame ) of any description etc complete all as specified and directed.

S & F Steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with or without glazing bars dovetailed or welded including one shop coat zinc chrome primer complete all as specified and directed.

S & F Steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in bed block for fixing of angle iron post, hold fast and the similer work complete all as specified and directed.

S&F in repair100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F in repair aluminium, anodised barrel tower bolt of extruded section of 150 mm long complete all specified and directed.

S&F in repair Aluminium handles extruded type ,anodised of 125 mm size complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls/ceiling , pillars & cornices including brooming down and cleaning the surfaces & applying one coat of white wash complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Ditto all as per item No 79 above but applying on steel surfaces.

M&L for complete removal of previous treatment and preparation of old plastered surface of walls and applying two coat of oil bound distemper including 1 to 2 mm thick wall care putty over one coat of primer complete all as specified and directed.

M&L preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed .

M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces including mixing water proofing compound (@3% by weight of cement) and surface finish even and smooth without using extra cement and applying two coat of cement base paint complete all as specified and directed.

M & L for MS work such as grills, grating, hold fast etc with end of bars shouldered and/ or reveted or forged into spikes framed guard bars barred iron doors, ladders, framed balusters, walk ways railing, framework of water tanks and simillars works conforming to Fe-410 Gde-310 complete all as specified and directed.

KAMAL TRADING CO.

continentalconstructionco.

SHASHI CONTRACTORS

m/s sahu enterprises

U.R ASSOCIATES

P.N. BROTHER