PROVIDING NEW GATE AND GEARING SYSTEM BY REMODELLING OF CANAL REGULATING STRUCTURES AT RD 53327 OF MUKANDPUR DISTRIBUTARY.

Amount

Dismantling brick work tile, masonry or tile in cement

Stripping and stacking slate or tiles of a roof.

Dismantling concrete (RCC)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Cement concrete 1:3:6 with stone ballast mixing by mech. Means using concrete mixer volumetric type.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M25 Using Concrete Mixer

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications Grade M25 Using Concrete Mixer.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure.

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level

Centering and Shuttering for flat surfaces such as suspended floors,roofs, landings,chajjas,shelves etc.

Nicking cement concrete surface (over 28days old including preparation and layingslurry

Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt. ( Also not to used over footpaths).

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.

Providing and fixing G.I. Sheet 0.80mm thick garage doors, with 40mm x 40mm x6mm angle iron frame with diagonal braces, 3.15mm thick gusset plates at the top and 25mm dia meter pulleys and T-iron 50mm x 50mm x 6mm guides at bottom including locking arrangement with handles and pintles, etc. complete in all respect.

Removing doors and windows together with the dismantling of walls( doors)

Removing doors and windows together with the dismantling of walls( windows)

Fixing steel window in walls with lugs, embedded in 15cmx12cmx7.5cm of cement concrete block of 1:2:4 mix including cost of cement concrete for lugs.

Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and Technical Specifications.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. (C.P.brass 15mm Angle valve without flange)

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect ( C.P. brass Bib cock long nose/long body foam flow without flange)

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe 25mm i/d (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe 15mm i/d (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.

Providing, Laying , fixing & jointing of P.V.C. Pipes ( 90mm o/d pipe of 6 Kgf. / sqcm) as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Laying , fixing & jointing of P.V.C. Pipes ( 110mm o/d pipe of 6 Kgf. / sqcm) as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. (Vitreous chinaware standard white pedestal for wash hand basin.)

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make C.P. Brass Pillar Cock foam flow (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Wiring fan point (With fan box)

Wiring light point

Wiring 6Amp. wall socket point

Providing and fixing jet spray with 2'-6" long PVC pipe.

Ceiling fans

Led batten 24 Watt

Solar street light

Non Revolving Non Tilting Chair

Table 900 mm x 600 mm x 750 mm

Emergency handheld Lantern 15 watt

Lever padlock 75 mm

Auto Level

Tripod stand for Auto Level

Levelling Staff

Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge

Providing & Fixing MS Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Steel Casing as per IS specification & grade complete in all respect and to entire satisfaction of engineer in-charge.

Providing Chequred Plate 6,8mm thickness of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing GI Pipe of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing MS J -Bolt with nut and washer dia 20mm complete in all respect and to entire satisfaction of engineer in-charge.

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge

Providingof hollow bulb seal( Side Seal ) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Providing and Fixing MS Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Applying priming coat with metal primer on new steel or iron work i/c preperation of surface.

Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide.

Providing and Fixing M.S. spindle with Double start or triple start threading 11 ft height 1/3/4" dia complete (i) upto 1 ton Capacity.

CI Housing Cover with worm & worm wheel assembly shaft ,Handle GM Bust with triple start threading inside for spindle complete including labour charges

Commissoning and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge

Any Other Item

THE PHULLU KHERA CO-OP L AND C SOCIETY LTD