Gram Kuan Kheda mein captain Shubham Gupta Smriti upvan mein samudayik hall Nirman karya

Earthwork in excavation inord.soilincluding all charges (S.I.No251)

Concrete with 4 cm gauge brick ballast, fine sand and cement in proportion of 1:4:8 in foundation including supply of all materials labour and T& P etc required for proper completion of the work.(S.I.No275)

M-150 class brick work in 1:4 cement and coarse sand of 1.25 FM mortar in foundation and plinth including supply of all material labour aand T&P etc required for proper completion of the work(S.I.No 303)

R.C.C. work with cement , coarse sand and 2 cm gauge stonr ballast in the proportion of 1:1.5:3 in Beams execulding supply of reinforcementbut i/c all.( S.I.No 289)

R.C.C. work with cement , coarse sand and 2 cm gauge stonr ballast in the proportion of 1:1.5:3 in Column execulding supply of reinforcementbut i/c all.( S.I.No 287[A])

M150 class brick work in 1:6 cement & c/sand mortar in super structure for wall of one brick thick i/c all material , labour T & P etc all complete.(303+309+310)

12 mm thick 1:4 with cement and coarse sand bearing plaster with neat cement finished i/c supply of all material , labour and T & P etc all complete.( S.I.No 583)

R.C.C. work with cement coarse sand and 20 mm gauge stone gritt in the proportion of 1:1.5:3 i/c of all materials, labour T&P etc. for slab.(S I No 284[A])

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand)

M.S. or iron work in plain R.C.C. work i/c cutting , bending & binding all completed work .[ S.I.No 504)

Earth filling in ordinary soil in plinth i/c ramming and dressing in the surface to required levels & slopes and also i/c 1.5 mtr lift and 30 mtr lead with cartage distance of cartage 2.00 km without royality (S I No 253)

Sand filling in plinth including supply of all material, labour and T&P etc.(SI No 255)

Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart ncluding drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1) cement: 2 Coarse sand) to match the existing floor. With Chlorpyriphos E.C. 20% with 1% concentration

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) CH 7/SI NO.1

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface brushes and finally with aplece of cloth lightly soaked in kemsene oil. With CH 7/SI NO.3

Mild Steel or iron work of fabrication of door and window frame i/c cost of hinges and supply of steel and wastage etc all complete.( S.I.No 502(b))

Making groving in plaster including all labour material , T&P etc required for proper completion of work.( S.I.No13.76)

P/A plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface eve and smooth complete.

40 mm thick PCC floaring in 1:2:4 cement,coarse sand and stone gritt with neat cement finished including supply of all labour , material T&P etc over 1:4:8 cement , fine sand and 40 mm brick ballast 3" thick including all completion of work.(As per S.I.No 601) DSR 11.3.1(614.20)

30mm thick flush doors commercially a quality confirming to IS 2002 Part 1983 i/c fixing of wooden cleats and stoppers and i/c fixingand adjustment of hinge bolt locks handle spring fitting with necessary screw to be supplied Ch 09 Si.no.01 DSR 9.21.2

Same as item no 21 above but for Double Leaf shutters add extra in over all rates DSR No. 9.26

Oxidized iron fitting i/c supply of all labour material T&P etc completion of the work

Two coat oil bond distemper of approvrd quality as per direction Engineer-in-Charge(Ch no 15 S.I.No 02)

Finishing walls with Acrylic Smooth exterior paint of required shadeNew work (Two or more coat applied @ 1.67lit/10sqm over and i/c base coat of water proofing cement paint applied @ 2.20kg/10sqm.( S.I.13.46.1)

Painting first coat over priming coat i/c priming coat on wood or steel and other metel surface with superior synthrtic enamel standard brushing to give an even shade and finish and i/c cleaning the surface off all dust and oother foreign matter sand papering and stripping i/c cost of all materials ,labour T&P etc requiredfor the proper completion of work.( S.I.No 13.48.2+13.50.1

Painting first coat over priming coat i/c priming coat on steel and other metel surface with superior synthrtic enamel standard brushing to give an even shade and finish and i/c cleaning the surface off all dust and oother foreign matter sand papering and stripping i/c cost of all materials ,labour T&P etc requiredfor the proper completion of work.( S.I.No 13.48.2+13.50.1+13.57.1

Plain cement concrete work with 1:2:4 cement ,c/sand and 20mm stone gritt in Hold Fast including all labour material T&P etc all completion work Ch-5, S.I.No 6

P/L 18mm Black Granite stone (super quality) flooring over 5mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry including rubbing and polishing complete..ch-14 S.No. 27

30 mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1.4 (1 cement: 4 coarse sand), including finishing complete

Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement: 2 coarse sand), including making the necessary chases

Supply of 110mm dia P.V.C pipe of approved quality including all charges etc.

Supply and fixing of Fan Boxes i/c all labour T&P etc complete.(S.I.No1149)

Wiring point for light with 1.5 Sq mm F.R.P.V.C.insul multistrend single core copper conductor in P.V.C. conduct pipe concealed in the wall .(S.I.No-131 C)

Wiring point for plug with 1.5 Sq mm F.R.P.V.C.insul multistrend single core copper conductor in P.V.C. conduct pipe concealed in the wall .(S.I.No-134 C)

Wiring point for fan/fresh air fan with 1.5 Sq mm F.R.P.V.C.insul multistrend single core copper conductor in P.V.C. conduct pipe concealed in the wall .(S.I.No-133 C)

S/F of fan regulator dimmer 300/400 watt ISI marked on existing switch board making connection (S.I.No. 1203 A)

S/F surface/flush mountaing 4 ways SPN distribution boards without MCB complete in all respect as direction at site by engineer-incharge(1022 CAT B)

S&F of 6 amp to 32 amp MCB (10KA)c curve .(S.I,No 1002 CAT B)

P/F 2.5 mm Sub-mains with two no. in 20mm dia heavy duty (2mm thick) PVC conduit with 1 no 1.5 Sq mm frlsh PVC insulated 1100 V grade multstrained single core copper conductor as EARTH continuty wire.(As per P.W.D.S.I.No.1304[C])

S/F of sign boardincluding all chrages.

ADD GST 18 PERCENT

Please Enable Macros to View BoQ information