ADDN ALTN OF EXISTING FAM-I WARD TO ADDL 40 ISOLATION BEDS ALONG WITH OXYGEN PIPE LINE SYSTEM AT BLDG NO P-1 AND SERVICES TO MOURTUARY CABINETS WITH CHAMBERS AT MH DANAPUR UNDER PARA-35 OF DWP 2020 URGENT WORKS

Amount

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including modular PVC modular box and top cover plate for mounting modular switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed.

All as per item No 1 above but one 5 Amps socket out let point on independent board controlled by one switch.

All as per item No 1 above but one 5 Amps socket out let point controlled by one switch on same board with other switches.

All as per item No 1 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board.

Supply and fixing modular Switch 6 Amps single pole, one way complete all as specified and directed. Make:- Legrand, Model:- Myrius, Cat No:- 6730 00 or equivalent model of North West/L&T, Model: Entice.

Supply and fixing Modular Socket outlet, multi purpose, 5 Pin 6 Amps flush type complete all as specified and directed. Make:- Legrand, Model:- Myrius, Cat No:- 6730 44 or equivalent model of North West/ L&T, Model: Entice.

Supply and fixing Modular Switch 16 Amps single pole, one way complete all as specified and directed. Make:- Legrand, Model:- Myrius, Cat No:- 6730 08 or equivalent model of North West/ L&T, Model: Entice.

Supply and fixing Modular Socket outlet, multi purpose, 6 pin 16 Amps universal socket complete all as specified and directed. Make:- Legrand, Model:- Myrius, Cat No:- 6730 45 or equivalent model of North West/ L&T, Model: Entice.

Supply and fixing ceiling rose surface bakelite three terminal complete all as specified and directed.

Supply and fixing wall fan of single phase 230/240V of size 400 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed .

Supply and fixing double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply and fixing MCB TPN 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply, installation and testing six cylinders manifold (6+6) system for oxygen gas connections, extendable type made of with high pressure copper annealed pipe of size 15 mm inner dia and 15 SWG brass fittings made of high tensile brass, flexible tail pipes made of copper pipe of 8 mm inner dia and 15 SWG thickness shall be equipped with individual non-return valves to the cylinder manifoldes for each cylinder manifold shall be provided with a terminal header and NPT connection for the SACP(semi automatic control panel). The entire manifold shall be hydraulically tested at 140 kg/cm2 pressure tested complete all as specified and as directed. (Make: ASB System/ Ascent Meditronic)

Supply, installation, testing and commissioning of Semi automatic control panel to reduce the variable cylinder pressure down to constant line distribution pressure withsuperior flow rate to the demand. Semi automatic control panel having two stage regulator, safety valve, visual indication of pressure gauge complete all as specified and as directed. (Make: ASB System/ Ascent Meditronic)

Supply, installation and testing two cylinders (1+1) emergency supply for oxygen service with high flow regulator isolating the main control panel to ensure uninterrupted oxygen supply complete all as specified and as directed. (Make: ASB System/ Ascent Meditronic)

Supply and fixing outlet for oxygen service with probe gas specific for the services indicated to aceept only compatible quick connect geomatric index type steel adapters as HTM/NFPA standered as per drawing and as required.(Make: ASB System/ Ascent Meditronic)

Supply and fixing oxygen flow meters with mask and humdifier bottle made from brass crome plated it shall be back pressure compansated type having housing of polycarbonate autoclavable reuseable flow range 0-15 LPM. Fitted with matching adaptor for oxygen outlet point humidifier shall be comfortable with flowmeter and reuseable and as per specifications and as required with suitable steel adaptor. (Make: ASB System/ Ascent Meditronic)

Supply, installation, testing and commissioning of Dry Air Vacuum pump of capacity 5 HP, piston displacement 54 CFM, two cylinder, single Stage, air cooled type suitably mounted on MS channel base frame electric driven AC 3 Phase 440 Volts TEFC electric motor 866 RPM with vertical air receiver tank of capacity 500 ltrs made of mild steel body shell thickness 6mm, disc thickness 8 mm, working pressure 10 Kg/cm2 and testing pressure 15 kg/cm2 along with pressure gauge and safety valve ,V-belt Drive, Belt Guard and DOL Starter and other coinnected accessories complete all as specified and directed. (Make: ASB System/ Ascent Meditronic)

Supply and fixing outlets for vacuum service with probe specific for the services indicated to aceept only compatible quick connect geomatric index type steel adapters as HTM/NFPA standered as per drawing and as required.(Make: ASB System/ Ascent Meditronic)

Supply and fix vacuum jar with rubber tubing complete with regulator capable of controling vacuum between 0 to 750 mm Hg and polycarbonate autoclavable reusable type vacuum jar of not less 600ml vacuum regulator shall have dial gauge, on/off switch valve control knob and as specification and as required with suitable steel adpater complete all as specified and as directed. (Make: ASB System/ Ascent Meditronic).

Supply and fixing low pressure tube with 93/42/EEC medical devices shall be EN 739 duly colour coated for individual services i.e. white for Oxygen and yellow for Vacuum antistatic rubber tube complete all as specified and directed.(Make: ASB System/ Ascent Meditronic)

Supply and fixing isolation valves 12 mm are to be ball valves with stainless steel balls and PTFE or Teflon seals. They shall be suitable for working pressure of 10.2 Kgs/sqcm gauge. Valve shall be fitted into the pipe line by means of capiliary hard soldered joint containing silver, it should be open/closed with help of handle with roatation of 90 degree complete all as specified and directed by Engr-In-Charge.

Supply and fixing isolation valves 15 mm are to be ball valves with stainless steel balls and PTFE or Teflon seals. They shall be suitable for working pressure of 10.2 Kgs/sqcm gauge. Valve shall be fitted into the pipe line by means of capiliary hard soldered joint containing silver, it should be open/closed with help of handle with roatation of 90 degree complete all as specified and directed by Engr-In-Charge.

Supply and fixing isolation valves 22 mm are to be ball valves with stainless steel balls and PTFE or Teflon seals. They shall be suitable for working pressure of 10.2 Kgs/sqcm gauge. Valve shall be fitted into the pipe line by means of capiliary hard soldered joint containing silver, it should be open/closed with help of handle with rotation of 90 degree complete all as specified and directed by Engr-In-Charge.

Supply, installation and testing Area Alarm panel panel having capacity of monitoring two gas services of size 300 mm X 200 mm X 65 mm with audio-visual alarm (Master and local area alarm) provided with gas colour coded gauge or regulator on pipeline side on the check wall in the pipeline inlet and test function provided in the line pressure alarm with audio-visual indicators, test button, emergency indicator and beep alarm complete with 220 volts 50 Hz AC input and low voltage transformer less than 24 volts mounted on a recessed box painted in distinct colours for verious gases complete all as specified and as directed. (Make: ASB System/ Ascent Meditronic)

Supply and fixing medical grade copper pipes of size 22mm x 0.9 mm for medical gases, complete with elbows, flanges, specials, other fittings and steel support, the copper pipes should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased materials conforming to BS-EN 1057/13348 of copper pipe with colour coded complete all as specified and as directed.

Supply and fixing medical grade copper pipes of size 15 mm x 0.9 mm for medical gases, complete with elbows, flanges, specials, other fittings and steel support, the copper pipes should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased materials conforming to BS-EN 1057/13348 of copper pipe with colour coded complete all as specified and as directed.

Supply and fixing medical grade copper pipes of size 12 mm x 0.7 mm for medical gases, complete with elbows, flanges, specials, other fittings and steel support, the copper pipes should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased materials conforming to BS-EN 1057/13348 of copper pipe with colour coded complete all as specified and as directed.

Boring holes 3m deep in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50m (dia of pile 300mm)

Excavation in trenches in any type of soil n.exc 1.5 m wide and n.exc 1.50m in depth for foundation, pier holes etc n exc 10 sqm on plan and getting out complete.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed by Engr-in-Charge.

Removing excavated material exc. 50m but n exc 250m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M&L for sand filling under floors or in foundations or underground cable protection including watering and consolidation.

M&L Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, mass concrete etc complete

M&L for hard core of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick with broken bricks, watered and rammed to a true surface complete all as specified.

M&L 100 mm thick Cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in sub base etc complete

M&L 40 mm thick cement concrete 1:2:4 type B0 damp proof course to horizontal or vertical surface including necessary form work complete all as specified.

M&L reinforced cement concrete M-25 (using 20 mm graded stone aggregate) as in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete.

M&L reinforced cement concrete M-25 (using 20mm graded stone aggregate) as in columns, pillars, posts, struts etc complete.

M&L reinforced cement concrete M-25 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, Lintels over 1.5 m span etc complete.

Form work to sides of rough finished surfaces of concrete foundations, footings, bases of columns, sides and sofits (if any) of foundations & plinths beams and similar wk flat etc complete.

Form work to rough finished square, rectangular or polygonal concrete surfaces as in sides of columns, pillars, posts, struts,etc complete.

Form work to rough finished flat surfaces as in sides and soffits of beams, lintels, coping etc complete.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete.

All as per item No 47 above but 5 mm dia and over in stirrups, spacers and binders complete.

M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified

M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement ) complete

M&L 15 mm thick rendering in two layers (10mm & 5mm ) on fair faces of bk / concrete surfaces in cm (1:4) with WPC (WPC measured & paid separetely) finished even and smooth (Without using extra cement ) complete.

Supply only water proofing compound (liquid), ISI marked.

M&L two coats of cement base paint over primer on wall including preparation of newly plastered surfaces.

M&L for two coats of Apex weather paint on newly plastered surfaces over a coat of primer including preparation of surface complete all as specified and as directed by Engr-in-Charge.

M&L Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size (125X60) mm made out of 1.25mm thick MS sheet , complete all as specified and directed.

S&F 35 mm thick plain framed panelled factory made shutter,made out of IInd class hard wood(Bijasal) rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1003 (part-I) kiln seasoned and chemically pressure treated of any number of panel

S&F 35 mm thick 1st class HW glazed and skelton door shutters open rebated with sash bar and prepared to receive wire gauge edges cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I section 8 and clause 8.24 (a) fitted to chowkats or frames of any numbers of panels

S&F framed guard bars with mild steel Square bars with ends of bars shouldered and riveted and similar work conforming to Fe -290 (Gde E-165)

S&F 100 mm long Mild steel medium weight cold rolled butt hinges and fixed with screw/welded to frames etc

S & F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed etc all complete.

S & F 125 mm Extruded Aluminium handles fabricated type anodised etc all complete.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type and fixing clips of sheet, cast or extruded section or cast aluminium alloy etc all complete.

M&L for applying two coats of synthetic enamel painting over a one coat of pink primer over 10 cm width or girth including preparation of new wooden surfaces.

M&L for applying two coats of synthetic enamel painting over one coat of red oxide primer including preparation of new steel surfaces exc 10 cm in width/girth.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm as in gauze door / window / ventilator shutters. etc all complete.

S&F steel windows with side hung shutters including projecting type hinges with MS handles and tower bolts complete with glazing & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection finishing even & smooth without using extra cement laid in bays with construction.

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper including 3 mm thick Birla/ JK wall putty complete all as specified and directed.

S&F hollow rolled mild steel structural steel work in tubular/ Square/rectangular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engr-in-Charge.

S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle bracket, cleat and other connection conforming to Fe-410-W (Grade E-250) 'A' quality complete all as specified and as directed by Engr-in-Charge.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed by Engr-in-Charge. Make : Jindal/TATA

All as per item No 71above but plain sheet as in ridge fixed with self tapping screws all as specified. Make : Jindal/TATA

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4.0 Sqmm size with multistranded copper conductor,drawn in and including non metallic rigid PVC conduit medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles etc of size 20 mm external dia in concealed wiring system by cutting of wall and making good disturbed surface of wall as per existing and including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green colour PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and as directed.

Supply & fixing Sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amps 240 volts fixed complete. Make: Legrand/Schneider/L&T

Supply and fixing MCB TPN 40 Amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make: Legrand/Schneider/L&T.

Supply and fixing for Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated,FRLS screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 16 sqmm 4 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (NOTE: Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this BoQ ).

Supply and laying sub class B bricks of size 25cmx15cmx7.5cm for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

M&L for 40 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.

J K CONSTRUCTION

RC GUPTA AND SONS

MS JODHI PRASAD SINGH SONS