PROVISION OF INTERLOCKING PAVED PATROLLING FOOTPATH AT CFEES AND PROVISION OF PAVED BLOCKS BETWEEN BUILDING AND OLD BUILDING P 8 AT CFEES UNDER GE (I) RnD DELHI

Amount

Earth work in excavation in all kinds of soil by mechanical means Hydraulic excavator / manual means in surface excavation or foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil/material/malba outside MoD land complete as per direction of Engineer - in - charge.

M & L for hardcore of broken stone or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L for providing and laying in position cement concrete 1:4:8 D2 (using 40mm grade stone aggregates) as in foundation filling and mass concrete including necessary form work as per site requirement complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (precast CC kerbs stone shall be approved by GE).

M&L for preparation of new concrete surface (as a kerb stone) and apply two coat of synthetic enamel (ordinary tint) of over a coat of Solvent thinnable /Oil base primer as per manufacture's instruction over 10cm girth and width not otherwise described

Demolishing brick work or stone/boulder masonry built in cement mortar including all quins,arches, pillars etc but excludingashlar facings, dressed stone work and precast concrete articles as per direction of Engineer-in-charge.

Material and labour for brick work with sub class ‘B’ straight or curved on plan exc 6mtr mean radius built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge

Ditto all as item No 8 above items but except bricks

Material & Labour for 15mm thick rendering in Cement mortar 1:4 on fair faces of brick work or concrete surfaces, mixed with water proofing compound as manufacture instruction and finished even and smooth without using any extra cement complete all as specified and as directed by the Engineer-in-Charge. Note:WPC shall be measured and paid separately.

Supply only integral water proofing compound.

Demolition of plain cement concrete in any description n exc 15cm thickness below or above GL as per direction of Engineer - in - charge.

M&L cement concrete type C1 1:3:6 using 20mm graded aggregate as in surface channel and drain complete all as specified and directed.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

M&L for precast reinforced cement concrete type B-1 1:2:4 using 20mm graded stone aggregate as in cover slab for drains with fair faces slab and set in CM 1:4 including necessary formwork complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking , bending, spirally for columns hooking ends binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 25 Sqmm 4 core

Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 16 Sqmm 4 core.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables etc. and getting out in the following type of strata complete all as specified and as directed .

(a) Soft/Loose soil

(b) Hard/ Dense soil

(c) Soft/disintegrated Rock

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed .

Removal of excavated material [soil] to a distance not Exc 50m and depositing where directed at a level not exc 1.5m above the starting point where directed complete all as specified and as directed .

M&L for laying reinforced concrete pipes for cable protection, class NP2 of dia 100 mm, 2 nos half round (for bottom and top) and before laying exacaved area shall be leveling all as specified and directed .

M&L for supply and erection of steel tubular swaged poles complete with cast iron base plate finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 meter long) with 1:2:4 cement concrete foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required complete all as specified and directed .

Supply and fix junction boxes out door type weather proof with fixing accessories made out of moulded PVC size 140x140x95 mm to be fixed at the height of 1 M from bottom of street light pole complete with wiring, arrangement for MS Clamp, cable entery/exit, 01 No. MCB SP 6 Amps, 4 pole connector 100 A for fixing cable etc complete all as specified and directed

M & L for Earthing complete with galvanised steel earth plate electrode '60cm × 60cm × 6mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to 'galvanised iron strip 32x6mm by means of bolts, nuts, check 'nuts and washers of galvanised iron or steel earth strip protected by provision of GI 'medium grade' pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of ohosphorus bronze with fixing arrangement ,funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as specified and connected to earthing test point all as specified or indicated 'including testing on completion.NOTE:-GI strip and GI pipe 40mm bore medium grade for encasing GI strip upto 7.50m length per earthing shall be deemed to be included in the unit rate.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6 galvanized iron strip, complete all as specified and directed.

Supply and fix 10 watt bollard light cone series out door type weather proof with fixing accessories functional value with IP 65 with in built LED and suitable size foundation for installing / grouting on PCC platform including connection complete all as specified and directed.

Supply and laying GI pipe medium grade 40 mm dia fixed on wall/ trench including connected fitting complete all as specified and directed.

Supply and Fix GI bracket of 40 mm dia GI light grade and pipe bend 120 degree including two nos clamps, nut bolts etc complete all as specified and directed.

S&F Integral LED Street Light Luminaire 100 W comprising of epoxy powder coated pressure die cast IP 66 aluminium housing, with accessories complete all as specified and directed.

M&L for copper cable wiring 2x2.5 sqmm and 1x2.5 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100 V grade for connection of street light from junction box inserting inside pole and connection complete all as specified and directed.

Design, supply,install, test and comissioning of free standing floor mounted, dust and vermin proof Panel of suitable size for out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 100 ,Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkaable sleeves,with 500 mm depth of the panel. The panel shall be modular/cubical trype with bus chamber cable allyand provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lamp with double stud hinged door , front and rear openable with locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 . The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm , embedded 200 mm below ground level in PCC 1:2:4, Type B1 using 20 mm grade stone aggregate , 600 mm above ground level and comprising the following with all required material such as glands, lugs etc

Design, supply,install, test and comissioning of free standing floor mounted, dust and vermin proof Panel of suitable size for out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 100 ,Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkaable sleeves,with 500 mm depth of the panel. The panel shall be modular/cubical trype with bus chamber cable allyand provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lamp with double stud hinged door , front and rear openable with locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 . The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm , embedded 200 mm below ground level in PCC 1:2:4, Type B1 using 20 mm grade stone aggregate , 600 mm above ground level and comprising the following with all required material such as glands, lugs etc

M&L for providing factory made heavy duly perforated precast cover slab in RCC using strength not less than grade M-30 of suitable size with 02 Nos of plain handle built in same and framed all around MS andgle iron of suitable size as per manufacturer desing complete all as specified and directed.

Taking down cement plaster, pointing, on brick or stone/concrete walls, drain surfaces etc including racking out joints, hacking for key, scrubing down with water etc in any position complete all as specified and as directed.

M&L for preparing surface plastered or unplastered on new/old surfaces and applying two coats of cement based paint complete all as specified and directed.

M&L for providing plain cement concerete type B1 1:2:4 (20mm graded aggregate) as in lintal upto 1.5m clear span, cills, steps, seismic and other similar bonds, plinth course, string course, coping bed plates, kerbs including weathering, slightly rounded chamfered angles and throating as complete all as specified and directed.

Supply and day in trenches burnt bricks sub class 'B' standard size for cable protection keeping width of the brick parallel to the length of the cable all as specifed and directed.

Supply and spread clean dry river sand in trenches, ducts including leveling punning for cushioning of cables all as specified and directed. Note: Pushed depth shall be measured.

Commercial Traders

M/s Himgiri construction

Mohit Infratech

Leo Network power systems

SAWARIYA ENGINEERS AND CONTRACTORS

M/s New Weather