ADDN/ALTN/IMP TO MUKHERJEE AND SEKHON TRANSIT BLOCK, BUILDING NO. P-61 AT OFFRS ENCLAVE AND APPROACH ROAD OF CERTAIN SMQS IN TECH AREA AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

M & L Cement concrete type D2 (1:4:8) using 40mm grade stone aggregate in foundations, filling and mass concrete complete all as specified and directed

M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte for flat rough finished of concrete surface complete all as specified and directed

M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square/rectangular or polygon rough finished concrete surface complete all as specified and directed

M & L Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished concrete surface complete all as specified and directed

M & L Formwork to soffits of suspended slabs such as roof slabs, chajjas floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat rough finished concrete surface complete all as specified and directed

M & L RCC (design mix) in M-25 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M & L RCC (design mix) in M-25 in Columns, pillars, piers,posts and struts complete all as specified and directed

M & L RCC (design mix) in M-25 in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M & L RCC (design mix) in M-25 in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M & L RCC (design mix) in M-25 in Chajjas complete all as specified and directed

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

All as per item No. 13 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

M & L Hardcore of gauge of broken stone or boulders n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M & L 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub base of floors complete all as specified and directed

M & L 25mm thick Cement concrete type B0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed

Spreading and levelling in layers n exc. 25 cm thick and for well ramming including watering as required complete all as specified and directed

M & L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M & L ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

M&L for Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 mixed with WPC on fair face of brick or block work or on concrete surfaces on external walls finished even and smooth without using extra cement complete all as specified and directed

M&L rendering 10mm thick in CM 1:6 on fair face of brick or block work or on concrete surfaces on internal walls finished even and smooth without using extra cement complete all as specified and directed

M&L rendering 5mm thick in CM 1:3 on ceilings fcomplete all as specified and directed

Supply only water proofing compound

M & L for 3mm thick wall care putty on walls complete all as specified and directed

M&L preparing new plastered surfaces on walls and applying two coats of oil bound distemper over a coat pf primer complete all as specified and directed.

M & L for Preparing and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for 75 mm thick cement concrete tyoe C2 (1:3:6) (using 20mm graded aggregate) as in plinth protection in alternate bays not more than 3.0 mtr length with joints between panels is 12mm wide will be filled with1 part of heated bitumen 85/25 grade and 3 parts of sand complete all as specified and directed.

M & L Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces.

Material and labour 40mm thick PCC nominal mix 1:2:4 type B0 (12.50mm graded stone aggregate) for roof treatment etc.

M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 2% by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound

M&L for cleaning the roof, plastered surfaces and applying evenly a priming coat of bitumen primer at the rate of 1.2 kg per Sqm and providing APP based polymeric modified water proofing membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/Sqm) laid on primed surface by forced application and applying two coats of solar reflective bituminous aluminium paint @ 0.1 kg/Sqm per each coat complete all as specified and directed.

M&L for Demolition of cement concrete (unreinforced) of any description and in any position including plastering and leeping (whether full thickness including, bitumen felt on roofs removed or only a part thereof) complete all as specified and directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) withextruded built up standard tubular sections/ appropriate Z sections and other sections ofapproved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of EIC

S & F Powder coated aluminium (minimum thickness of powdercoating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings such as handles, locking arrangements, tower bolts wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

M & L 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination &other side balancing white lamination, fixed with screws to timber frame wor prelaminated both sides with decorative choice lamination complete all as specified and directed

M & L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of EIC

S & F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pan complete all as specified and directed

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed

M & L providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includin fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

S & F 30mm thick Flush shutters, solid coreconstruction, with particle board face panels, decoravitive veenered on both sides complete all as specified and directed

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour single side prelam PVC sheet used instead of Plaincolour PVC sheet & edges will be painted to match with prelam sheet rcomplete all as specified and directed

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges complete all as specified and directed

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-In-Charge

M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) laid in flooring as specified and directed by Engineer In charge.

M&L for non skid colour ceramic tiles of 300mm x 300mm of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles all as specified and as directed.

M & L Virified Ceramic tiles double charged/ultracharge shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm (size 800mmx 800mm) , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles all as specified and as directed.

M & L Virified Ceramic tiles double charged/ultracharge shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm (size 800mmx 800mm) , for skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering coat/backing layer in CM (1:3) complete all as specified and directed

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water and removing the debris out of MOD land etc complete all as directed.

M & L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/daddo etc. over 10mm thick rendering coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L Non - skid coloured Ceramic tiles (300mm x 300mm) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L Glazed digital coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L for digital coloured glazed ceramic tiles of sizes 300mm x 600 mm X 7 mm thick jointed in neat cement slurry, in vertical surfaces laid over including 10 mm thick rendering coat/backing layer in CM (1:3) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as directed.

M&L Virified endura heavy duty tiles 12-15mm thick (square/ rectangular)of porcelain material , area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15mm thick cement screed bed 1:6 complete all as specified and directed. Make : Johnson/AGL or equivalent

Dismantling of Stone slabs and tiles of any description or thickness laid dry or laid dry and pointed complete as directed.

M&L for Rubberised chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over 15mm thick cement screed bed 1:6 complete all as specified and directed.

M&L for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:4 complete all as directed.

M&L providing, cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. complete all as specified and directed.

M&L 50mm sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block with grey cement and colour pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 complete all as specified and directed.

M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or complete all as specified and directed.

Removal of excavated materials & debris exc 250m n.exc 500 m and depositing at a level n. exc. 1.5mtr above the starting point complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete as per specifications and drawing

S & F 5mm thick PVC sheet fillet of width35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete as per specification and drawing

M & L for 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rounding edges,grinding and polishing complete all as specified and as directed.

S&F in repair counter top wash hand basin oval shaped 550x430x195mm with all fittings as waste coupling , CP bottle trap,waste pipe PVC connection etc complete all as specified and directed. Make: Parryware/CERA or equivalent

S&F water closet 'S' trap Ivory colour 680 x 370x 750mm with soft close seat cover with twin flusing cistern fittedon floor with wall distance 225mm +/- 10mm from the wall complete all as specified and directed. Make CERA/Parryware or equivalent

Taking down or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

Taking down or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth

Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fix steel water tubing 20 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fix steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair angle valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supply and fix 15 mm bore PVC connection pipe 45cm long with brass nuts and washers on both ends in repairs complete all as specified and directed.

S&F in repair 15mm wall mixer CP fancy type long body for mixing of HOT or COLD, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed Make : PRAYAG/CERA or equivalent.

S&F in repair 15 mm bore WHB mixer taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as directed. Make : PRAYAG/CERA or equivalent.

S&F brass CP Shower rose with arms 125 mm size fixed to pipe complete all as specified and directed.

S&F Sheet glass assembely consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long above WHB complete all as specified and directed.

S&F Brass Chromium plated Tubular towel rail, 20mmdia, D type, 60cm long between flanges complete all as specified and directed.

S & F 15mm Pillar taps, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

Supply and fix Grating doom 125 mm dia with / without waste hole of PTMT (Minimum weight 40gms) and fixed in repairs complete all as specified and directed.

Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and directed.

S&F 32mm Dia PVC waste pipe for sinks or wash basins complete all as directed and specified.

M & L 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm?45gms/ 40mm-60 gms) complete all as specified and directed

S&F in repair Two way taps 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions complete all as specified and directed. Make : PRAYAG/CERA or equivalent.

S & F 15mm dia bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F 20mm dia bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F 25mm dia bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed

S & F 10 Ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete in repairs all as specified and directed

S & F Wash basins, Vitreous China (flat back or angle back type)any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe

M&L in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed complete all as specified. Make : PRAYAG/CERA or equivalent.

Supply and fix Grating doom 125 mm dia with / without waste hole of PTMT (Minimum weight 40gms) and fixed in repairs all as specified and as directed.

Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed.

S&F PVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap of 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed.

M&L for MS Framed brackets of angles or tees For Grill door, Wicket gate, Ladder with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, MS Round bars conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed by the Engineer-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M & L for structural steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde?E- 250) quality complete all as specified and directed

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment Fe 410 -W (Gde?E- 250) quality complete all as specified and directed

S & F for 16 to 20mm dia MS bolts and nuts made with hexagonal or square headed one end and screwed the other and to be fitted with washer and one nut n exc 30 cm long complete all as specified and as directed

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated /semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for preparation of newly treated iron steel surfaces of anydescription, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit of adequate size concealed type with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket outlet 5 amp point on the independent board

One 3 Pin socket outlet 5 amp point the same board

All as per item No. 122 here-in-before but with 4 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 15 Amps socket

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular socket, 16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular fan regulator 120 W 2 module complete all as specified and directed by Accepting officer

Supply and fix wall mounted LED Batten fittings extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED (4 feet) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-charge.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

Supply and fixing of chandelier light Suspended decorative type of capacity of 12 Nos of 4.5 Wattage made of stainless and glass material complete all as specified and directed by Engr-in-charge. Make : Havells Monarc chandelier 12LS E14 CL CRM or equivalent

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-charge

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, BEE 5 Star rating complete all as specified and directed by Engr-in-charge.

S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed.

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge

saradhi construction combines

Vipin Kumar and Brother

KOGANTI CONSTRUCTION COMPANY

VACON INFRASTRUCTURES

K LAKSHMAN SINGH AND CO

SURA INFRASTRUCTURE

VSHVAS CIVIL AND ELECTRICAL SERVICES PRIVATE LIMITED

SRI LALITHA CONSTRUCTIONS

K P R ENTERPRISES

SRI BHAVANI ENTERPRISES