SPECIAL REPAIR TO ORS MD ACCN (P-29 and P-39) AT OLD RATC LINES UNDER GE (WEST) MATHURA

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

S&F 30 mm thick factory made flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides include provision of suitable blocks for taking mortice locks, latche, or other fittings complete all as specified and directed.

S&F 2nd claass factory made hard wood 35mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing inculding fxing of hinges complete all as specified and directed.

S&F 28 to 30mm thick factory made solid PVC moulded door shutter with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 200 mm long stainless steel barrel tower bolts complete all as specified and directed.

S&F 150 mm size stainless steel door handles complete all as specified and directed.

S&F for stainless steel butt hinges medium weight 100 mm long complete all as specified and directed.

S&F powder coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for windows, ventilators (sliding , fixed or casement) with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-B (18 mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle with or without opeing for AC/cooler as directed.

S&F Anodised powder coated aluminium window and ventilator shutters, fixed type with sash bar and louvered, aluminium section weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F Anodised powder coated aluminium window and ventilator shutters, side hung type with sash bar and louvered, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws incl pegstay 150mmlong, hinges100mm long, suitable handle etc. complete all as specified and directed.

M&L PCC 1:3:6 type C0 using 12.50 mm graded crushed stone aggregate as in bed block or filling of chowkats incl necessary form work complete all as specified and directed.

S & F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 300 mm stainless steel sliding door bolts, plate type, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door with screws complete all as specified and directed.

S&F in repair Tubular towel rail 20mm dia 600mm long Aluminium Anodised complete all as specified and directed.

S&F in repair curtain rod stainless steel ,20 mm dia mild steel, chromium plated with fixing brackets knobs, stops, rollers, and fancy end caps etc. complete all as specified and directed.

S&F mild steel 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed.

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggregate as in floor finished even and rough to received top layer or tiling complete all as specified and directed.

M&L for Non skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per item No. 29 above but as in skirting over & including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes complete all as specified and directed.

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.06 Sqm but n exceeding 0 .11 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15 mm thick in CM 1:4 in floors, complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles(colored) in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

Dismantling of Stone slabs and tiles of anydescription or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar(1:4) including pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl and over screed bed or beeding layers of mortar 20 mm thick in CM 1:4 , complete all as specified and directed.

M&L Machine cut kota stone slab flooring one piece as in treads of steps 18-20mm thick over and incl 20 mm thick screed bed in CM 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Kota stone slab 18-20mm thick ( One piece) in riser of steps, skirting, dado and pillar laid over and incl 10mm thick backing coat in CM 1:4 cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge , such as in steps, cooking platform and other similar situations complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brick work using Old size burnt clay bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc complete all as specified and directed.

All as per item No. 40 above but except brick only.

M&L for Rendering dubbing coat over damaged irregular surface of walls/chajjas/ roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including making of drip course and applying three coats of White wash incl taking down/roughening surface of old surfaces by picking sweeping clean and washing with water upto G +2 bldg height complete all as specified and directed. Note :Rate for form work if reqd to be incl in the rate quoted by the contractor.

M&L for applying rust remover @ 5-6 Sqm/Ltr,after cleaning to remove loose rust/scales/corrosion from reinforcement bars having specific gravity 1.2-1.22 .The material to be applied to the rusted metal using brush ,allow it to react for 16-24 hrs & afterwards witr brushing the surfce ,clean with dry cloth before application of protctive coating upto G +2 bldg height etc complete all as specified and directed.

M&L for fixing welded MS wire mesh weighing not less than 1 kg/Sqm and applying using mucis protezion ferro mono primer and anti corrosive primer uncovered steel and concrete surface chemical (Single component,cementious corrosion inhibiting primer) on uncoverd steel reinforcment and wire mesh having mixed density of 2.01 -02.05, adhesive on bond strength -1 N/MM touch drying time for 10-15min and applying 20mm thick cment mortar 1:4 with using integral water proofing liquid admixture for concrete mortat and integral water proofing compound for cment based concrete and mortar checmical 100/L 1/-1/2 gm/cc, cholride content nil as per IS 2545-2003 & using acrlyic polymer base bonding agent and acrylic emulsion modifeir and water based cancrete bonding agent chemical STD haivng specific gravity of 1.02 in ratio as per recommendation of manufactue total chemical not less than 8% by weight and providing single component polymer suing single component thixoporic fibre reinforced polymer modifed repair mortar (1:1:4) to achieve compressive strength of 15mm in 1 Day, 25N/mmin 3 dys ,adhesion bond strength of >2N/mm upto G +2 bldg height complete all as specified and directed.

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in two coats, first coat with 10mm thickand second coat in 5mm thick in cement plaster 1:4 in mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement on wall surfaces complete all as specified and directed. Note:- WPC Shall be measured seperately.

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement plaster 1:6 finished fair and even complete all as specified and directed.

M&L for rendering 5mm thick on concrete surfaces in ceiling in cement plaster 1:3 finished fair and smooth complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C1 as in plinth protection/footpath using 20mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed.

M&L for treatment of sunken floor slab of WC & Toilet comprising of the following specifications with and including demolition of sunken floors complete all as specified and directed:- (i) Cleaning the sunken/lowered portion of \rcc slab surface (incl vertical total depth plus skirting height) of floors by wire brush,chisel out any mortar sticking to the surface and brooming completely. Provn of 40 mm thick avg PCC 1:2:4 type B-O using 12.5mm graded aggregate as in padding concrete to achieve proper slope incl cutting holes in bricks or RCC wall for sprout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and incl integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc/Thermax as approved by GE @ 0.2% by wt of cement consumed incl filling it with water to check dampness and seepage and where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out. (iii) All junctions points of side wall where CI/GI/PVC pipes are passing through shall besealed with epoxy puttySikaguard 694 F(I) or equivalent make in Fosroc/Thermax as approved by GE (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean

(v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or equivalent make in Fosroc/Thremax as approved by GE over base coat as per manufacturer's instruction to bottom and vertical sides upto finished floor level +100 mm height. The thickness of two layers shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vetical and bottom surface of the sunken portion. (vi) Plaster the bottom surface and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with and incl integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc/Thermax as approved by GE @ 0.2% by wt of cement consumed as per manufacturer's specification incl rounding of corners and injuctions sloping towards spout. (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint. (viii) The sunken floor shall be filled with lean concrete 1:7:12. Note :- Test the water proofed area (ponding test) by filling water for atleast 72 hours and tested for leakage/seepage and to the entire satisfaction to GE. Test record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all M&L is included in the rates quoted above.

M&L guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC /CICO/PIDILITE)@ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30mm all as per manufactureres instruction.(Upto 5 mtr height) including necessary chiping/taking down loose concrete along with application of rust remover for old rusted bars and rebar if required followed by application of anti corrosive paint over old /rebar as per manufacturers instruction complete all as specified and directed.

S& F mild steel welded fabric of weight n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified and directed

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and directed

Dismantling brick/concrete tiles any size laid bedded and pointed in any mortar etc incl existing roof treatment of any thickness complete all as specified and directed

Demolition of mud or bricks in roofs any thicknees and in any position and leaping over roof terrace removing the demolished material to a distance exc 250 m n,exc 500 m and depositing where directed at a level n, exc 1.5 m above starting point complete all as specified and directed

M&L for Providing, cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate in coping, coving, roof padding, padding in sunken slab, complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM 1:4 mixed with water proofing compound complete all as specified and directed. Note:- WPC shall be measured seperately.

M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof:- (a) Cleaning plastered roof surfaces and applying a coat of Oxidised bitumen based solvented primer @0.4 Kg/Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric waterproofing membrane 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be seated by flame complete all as per manufacture instructions and as directed.

M &L Cement concrete tiles 25cm x 25cm x 20-22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors/roof, and cut and polished incl 20mm screed bedding layer in CM 1:4 complete all as specified and directed.

Taking up or down steel tubing and connections ,15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections , 20mm bore complete all as specified and directed.

M&L for Cutting cheses, pinning in, making good to facing where required & pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing etc. and making good, cutting not exc 10CM girth in brick wall etc complete all as specified and directed.

M&L 15mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 20mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors upto G +2 bldg height complete all as specified and directed.

Taking down eaves gutters and rain water pipes, soil, waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F 110mm PVC bore (SWR) pipes of pressure rating 6kg/per sqcm single socketed, excluding fittings in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110mm PVC bore (SWR) pipes of pressure rating 6kg/per sqcm single socketed, excluding fittings in any length with rubber ring joints, fixed in floor complete all as specified and directed.

S&F for 110mm bore PVC (SWR) bends any radius with oval access door complete all as specified and directed

S&F for 110mm bore PVC (SWR) junction , single T equal or unequal complete all as specified and directed.

M&L 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 50 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall for spout etc complete including taking down old pipe complete all as specified and directed

Supply for Pipe Supporting Clamping - Single Pipe of dia 110 mm (4") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4") CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jaipur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : TD/2022/01 and TD/2024/02. Make: Shaivi or equivalent as approved by GE.

Supply for Pipe Supporting Clamping - Single Pipe of dia 75 mm (3") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3") CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jaipur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : TD/2022/01 and TD/2024/02. Make: Shaivi or equivalent as approved by GE.

Supply for Pipe Supporting Clamping - Single Pipe of dia 15 mm (1/2") down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt Rubber Sleeve mounted system running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of: 1. Mono Bracket for 15 mm (1/2") pipe having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 15 mm (1/2") pipe, Wall distance 75 mm (3") - 1 Nos. 2. U Bolt Rubber Sleeve mounted of 15 mm (1/2") Pipe Dia. - 1 nos and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 2 Nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jaipur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : TD/2022/01 and TD/2024/02. Make : Shaivi or equivalent as approved by GE.

Supply of Pipe Supporting System for Riser Water Supply pipelines for Overhead Tank Supply fixing done with Pipe Supporting Clamping System consisting of Profile Bracket + Slotted C Channel B3 Type + U Bolt R/M System - Water Supply Downtake take pipes 1" CPVC - 4 no. running Vertical Fixed line from Terrace to Ground Floor with wall distance 3": Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 375 mm (15") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. per unit: 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 375 mm (15") - 1 No.; 3. U Bolt R/M for 25 mm (1") CPVC pipe Dia. - 4 nos and 4. Justi Khilla GI coated 2 1/2" - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no.: TD/2022/01 and TD/2024/02. Make : Shaivi or equivalent as approved by GE

S&F in repair for long neck bib taps cast copper alloy with screwed down for iron pipe or brass ferrule and fixed fancy type chromium plated 15 mm bore complete all as specified and directed

S&F for stop cock angle type cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe (chromium plated) 15mm bore fixed in repair complete all as specified and directed.

S&F for fancy type stop cock cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe chromium plated (concealed type) 15mm bore fixed in repair complete all as specified and directed

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim, complete all as specified and directed

S&F in repair SS Sinks with drainage board made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Note:- Supply of waste pipe & waste coupling will be paid in repective item.

S&F for vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket fixed in repair complete all as specified and directed.

S&F in repair brass chromium plated shower rose of 125mm size complete all as specified and directed.

S&F Shower arm 15mm size 195mm long with bend of 45 degree with flange of CP any colour (minimum weight 40 gms) complete all as specified and directed

S& F in repair PVC connection best quality with PTMT nuts 450mm long complete all as specified and directed.

S&F 15mm bore in repair CP pillar taps (swan neck with long shank) Fancy type cast copper alloy along screwed down high pressure with hot & cold with long screwed shanks and fly nuts screwed for GI pipe complete all as specified and directed.

Dismantling old water tanks and removing to store exc 500 & nexc 1000ltrs complete all as specified and directed.

M&L Rotational moulded polythelene water tanks white colour triple layers (cylindrical vertical with closed top) hoisted and fixed in position for 750 ltr. Storage capacity complete all as specified and directed.

M&L for PCC (1:3:6) Type C-1 with using 20mm graded stone aggregates as in platform for PVC tank complete all as specified and directed

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pie and fixed complete all as specified and directed.

Supply only 32mm Waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply only 40 mm Waste fittings, brass, chromium plated for sinks, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.

S & F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed to WHB, sink complete all as specified and directed.

Preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and M&L for applying a coat of pink primer and two coats of synthetic enamel paint complete all as specified and directed.

M&L for applying two coat of synthetic enamelled paint over a coat of red oxide primer of any girth including preparation of new steel surfaces complete all as specified and directed.

Preparation of new plastered surfaces of walls and M & L for applying two coats oil bound distemper over a coat of chalk whitening prepartory to distemper complete all as specified and directed.

Preparartion of new plastered surfaces of walls and M & L for applying two coats of of Apex over a coat of alkali primer on walls etc complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia,cornices etc by scrapping , grit to make surface clean, free from dust,loose paint etc by skilled labour and M&L for applying two coats of oil bound distemper on prepared surface complete all as specified and directed.

M&L for applying three coat of white wash on ceiling including preparation of new plaster surface complete all as specified and directed.

Complete removal of white wash on ceiling and M&L for apply three coat of white wash and preparation of surface complete all as specified and directed.

Preparing newly plastered or unplastered surface of wall and M&L for applying three coats of white washing complete all as specified and directed.

Preparing old plastered or unplastered surface of wall and M&L for applying two coats of white washing complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in in surface channel and drains complete all as specified and directed.

Extra for forming fair finished drain or channel of manholes inner girth n exc 30cm in cement concrete using extra cement including forms mould mitred stopped ends etc complete all as specified and directed.

M&L precast cement concrete type Bo (1:2:4) using 12.5mm graded crushed stone aggregate set in CM (1:4) louvres and jallies,25mm thick (measured solid),including all mouldings but excluding frame complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in manhole cover slab with plain fair faces and set in cement mortar 1:4 complete all as specified and directed.

S&F 18 MM thick WPC Celuka board of Plain White color both side fixed with screws solvent cement/ adhesive to make kitchen cabinet/cupboard sides top and bottom and shelves inside the cabinets, cupboard shutters/frames complete all as specified and directed. (Density- 575 to 600 Kg/ CBM)

S&F 18 MM thick WPC Celuka board of Single Side Prelam/Rigidlam color fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinet, cupboard shutters/frames complete all as specified and directed. (Density- 575 to 600 Kg/ CBM)

S&F Auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 digree for kitchen cabinet shutters complete all as specified and directed.

S&F 40mm width continous (piano) hinges, mild steel,bright finish or electro galvanised complete all as specified and directed.

S&F stainless steel handles 100 mm size for kitchen cabinet shutters/ cupboard complete all as specified and directed.

S&F magnetic catcher of size 20mmx50mm suitable for kitchen cabinet shutters/ cupboard complete all as specified and directed.

S&F Ball bearing runners 450mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed.

S&F stainless steel kitchen plate rack overall size 750mm X 600mmx 350mm made out of 0.8mm thick stainless steel sheet etc. complete all as specified and directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 100 mm outet diameter cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair for soap dish,any type,fixed to plugs with chromium plated brass screws complete all as specified and directed.

Taking down shutter only of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and incl priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed.

Supplying and applying, SmartCare Damp Block 2K, two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications. Sprinkle sand at 10-15 gram per sqft for better grip with plaster upto G +2 bldg height complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed

M&L for 50 mm thick sand stone slab as in chajja/cover slab set and jointed over supports in CM (1:4) complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L RCC (nominal mix) 1:2:4 using B-0 12.5 mm graded crushed stone aggregate as in chajja complete all as specified and directed.

M&L RCC type B1, 1:2:4 using 20 mm graded crushed stone aggregate as in slab supported on wall , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to soffits of chajjas and such as roof slabs, landings and similar work: not exceeding 200 mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for Formwork to edges of concrete flats, floor slabs, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n exc. 20cm wide for fair finished flat surfaces of concrete complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L PCC 100mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness of grade M-35 with dark shade/ ultra charged/double charged complete all as specified and directed.

M&L 25mm thick Sand cushion filling under floors including watering and consolidation complete all as specified and directed.

M & L for Plain cement concretein type B1 1:2:4 using 20 mm graded crushed aggregate as in copings complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware)150mm dia , AC or Reinforced concrete) set in cement mortar etccomplete all as specified and directed.

Excavation in trenches in soft/loose not exc. 1.5m wide and not exc. 1.5m deep and geeting out complete all as specified and directed.

M & L for Plain cement concrete in foundation filling type D-2 1:4:8 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius in cement mortar 1:6 complete all as specified and directed.

M & L for Plain cement concretein type C1 1:3:6 using 20mm graded crushed stone aggregate in surface channels and drains complete all as specified and directed.

M&L for Cement concrete for 150mm pipe with 1:3:6 type C-2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tes complete all as specified and directed.

M&L for 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for Providing precast cast concreteType B1 1:2:4 using 20mm graded crushed stone aggregate landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs, mangers, shelvesand similar articles with plain faces complete all as specified and directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Returning, filling, in including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed

Removing excavated material to a distance n.exc 50M and depositing where directed at a level n.exc 1.50M above the starting point complete all as specified and directed.

Taking down old unserviceable copper / aluminium point wiring (light / fan socket or power) complete including existing conduit, fixture and fittings such as switches, ceiling rose, holder, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/ fan/ exhaust point controlled by one, one way switch 06 Amps.

All as per srl item No 149 above but one two way, 06 Amps switch complete all as specified and directed.

All as per srl item No 149 above but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.

All as per srl item No 149 above but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.

All as per Serial Item No 149 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed

S & F in repairs modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with finger proof terminal complete all as specified and directed.

S & F in repair modular , single pole, Two way 6 Amp switch complete all as specified and directed.

S & F in repairs Modular Bell push flush type 6 Amp, 1 module, 230 Volts complete all as specified and directed.

S & F Bell ding dong type, AC, 240 volts, single pole complete all as specified and directed.

S & F in repairs modular type 2/3 pin 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S & F in repairs modular type 16 A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed.

S & F in repairs modular type 2/3 pin 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 3/5 pin socket with one single pole MCB 20 Amp 230 Volts complete all as specified including concealing in wall suitable for AC and Domestic appliances complete all as specified and directed.

S & F in repairs modular type 120W step fan regulator of 2 module size conformng to IS: 11037-1984 complete all as specified and directed.

S & F Fency Jumbo Batten holder metal ring suitable for LED bulb of 9 Watt complete all as specified and directed.

S & F in repairs ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed.

S & F LED (1.2 M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumen/20 watt at a minimum system efficacy of 2000 lumen per 20 watt and total power consumption not more than 20 watt including driver of capacity 10 KA. it has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 complete all as specified and directed.

S&F LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.

S & F of LED (0.6 M)/ 2 ft smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1150 lumen/10 watt at a minimum system efficacy of 1150 lumen per 10 watt and total power consumption not more than 10 watt including driver of 5 KA capacity. it has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 complete all as specified and directed.

S&F Security Light of 35 watts of new generation energy saving & environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 with 10KV Built -in-Surge Protection Devision,should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 including suitable pipe, clamps, nut and bolts for mounting the light complete all as specified and directed.

S&F LED bulk Head 10W HEXA environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs with all connected accessories complete all as specified and directed.

M&L for sub main wiring with two single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 4.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and directed. Note : Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.

M&L for concealed submain wiring with two single core PVC insulated FRLS-H multistranded copper conductor cable of size 06 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 06 Sqmm FRLS-H multistranded copper conductor cable as continuous earth wire including cutting chasing, making existing colour on the wall and taking down unserviceable sub main complete all as specified and directed. Note :- two runs of 06 Sqmm copper wire and one run of 06 sqmm copper earth wire alongwith PVC conduit shall be meausred as one unit.

S&F DBs factory made, 12 way sheet steel distribution boards double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar including taking down complete all as specified and directed.

S & F MCBs of 'C' series SPN 40-63 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S & F MCBs of 'C' series single pole 6 to 32 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

M&L for making of hole in brick wall including removal of dismantled materials, making good disturbed surface, platering, making holes fixigng bolts suitable for fixing 250/300 mm exhaust fan frame complete all as specified and directed.

Supply only PVC connection, steel braided suitable for hot & cold water supply with chromium plated brass screwed nuts at both ends with washers for making water connection of inlet & outlet complete all as specified and directed.

Supply, installation, testing & commissioning of electric storage water heater of 25 litre capacity, rated voltage -230 VAC, single phase, 50 Hz of rated power input-2000 Watt conforming to IS 2082 with standing loss ≤ 0.511 & ≥ 0.465 KWh/24Hr/45°C (5 Star BEE rating) having feroglas dry powder coating in water stoarge tank of ultra thick super cold rolled steel plates of high-strength, sock - proof ABS body using IPX4 technology to protect electrical parts from water splash whirlflow technology to avoid direct contact between cold and hot water flow, glass coated incoloy heating element for good corrosion resistance with execllent resistance to both oxidation and carbonization, feather touch panel for temperature setting between 25°C to 75°C to control energy consumption, digital display with 3 preset controls for easy operation, energy saving high density thick PUF insulation for better heat retension, having sacrificial magnesium anode rod with steel core to protect water tank from rust and corrosion to enhance the tank life, having safety feature like thermostate, thermal cut off, multifunction valve, shock-safe plug to prevent electric shocks by cutting off the power in case of current leakage suitable for high-rise buildings of 8 bar (0.8 Mpa) pressure including fixing & connecting accessories like mild steel anchor fastener of size 10 x 100mm with nuts and washers, drilling/making hole on wall with provision of stainless steel breaded (SS 304 Graded) connection pipe (01 Pair) in 600 mm long for hot & cold water circulation with nuts and washers and testing there after complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including grouting of frame in wall and connecting with and including 3 run 1.5 Sq mm single core, PVC insulated but unsheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan complete all as specified and directed.

Supply and fixing in replacement exhaust fans 300 mm sweep metallic body, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery discharge 1710 CMH suitable for SP, 230/250V, 50 Hz AC supply with protective bird guard with louver shutters including grouting of frame in wall and connecting with and including 3 run 1.5 Sq mm single core, PVC insulated but unsheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan complete all as specified and directed. Note :- Old u/s exhuast fan deposit to MES store yard by contractor

M & L in replacement of Earthing complete with galvanized steel earth plate electrode 60cmx60cmx 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanised earth strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elecrical plate No 3 of MES SSR Part I connected to main DB or main control board all as specified and testing on completion including provision of earth wire portected by galvanised iron 40 mm bore light grade pipe with all fittings from the earth electrode fixed along pole with and including 25 x 6 mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from Top of the earth electrode to bottom of the earth pit and earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle with 10mm dia, charcoal/salt, funnel, CI frame etc complete all as specified and directed

Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note :- Old u/s ceiling fan deposit to MES store yard by contractor

Taking down of smart prepaid meter with accessories & refixing the same after completion of surface work with nut, bolt etc complete all as specified and directed.

Supply and fixing TP 25 to 63 amp 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F Vertical TPN DB 04 Way Double door with IP 43 protection, rated current 125 A, 415 V ,IS 8623-1 IS 8623-3 IEC 61439-3, including taking down complete all as specified and directed.

S & F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA including taking down existing HRC fuse isolator complete all as specified and directed.

Supply, laying, jointing & testing 20 mm mild steel galvanised water tubing, medium grade with all GI fittings including cutting, screwing etc and laid in trenches, on wall, floors, ceiling etc complete all as specified and directed.

S&F in replacement 20 mm gun metal globe or gate valve conforming to IS : 778 ISI marked with iron wheel head screwed both ends for iron pipe including GI fitting socket, nipple, unions as well cutting of pipe and necessary earth work for following size complete all as specified and directed.

S&F in repair/replacement float valve of 20 mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Filling approved river sand in trenches for sand cushion for laying of cables to the full width of excavated trench , gently punned down etc complete all as specified and directed.

M&L for Bricks slightly over burnt (kiln burnt) , old size bricks , best quality locally available , laid flat dry laid in trenches for cable protection complete all as specified and directed.

Supply and lay in replacement of LT cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete all as specified and directed.

Supply and lay in replacement of galvanised iron pipe 50mm dia light grade incl all fittngs for protection of UG cable complete all as specified and directed.

M&L for drilling hole under road for laying of U/G cable through pipe of suitable size complete all as specified and directed.

M/s Ravi Traders (BID ID -3398487)

Ms Kamal Kant Agarwal (BID ID -3403976)

shyam construction (BID ID -3404012)

M/s Singh Engineering Corporation (BID ID -3397911)

ARCHI ENGINEERS (BID ID -3404319)