Supply, Installation, testing and Commissioning for creation of 100KVA Substation along with allied material near Contractor Association Building Leh on full turnkey basis.

Amount

100 KVA, 11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, (Aluminium wound upto 200kVA, Copper wound for 250kVA or higher kVA ratings) , and with LV Cable Box having detachable Aluminium Gland plate

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

120 mm² (2Ckt) Cable, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type for 100KVA DTs

9 Mtr. Long Pole,ST-410 SP33)

33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative creepage distance 900mm

GI Channel/Angle/Flat of sizes including clamps (as per REC Standard).

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

LT Distribution Box Out door mounting type for 3 Ph 100kVA DTR having 200A TPN isolator, 200A HRC fuse (incomer) and 6 Nos 90A SP MCCB (outgoing)

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedge Connectors / PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

3 phase, 4 wire Prodigy Energy Meter for DT of IS standard as per REC standard

Cement bottoming 1:2:4 mix as per REC standards 0.5cum /pole including muffing 0.2Mtr above the ground level plaster and curing of concrete as per drawing/Annexure "D"

Painting of Poles Red Oxide

Painting of Poles Aluminium Paint

Sundry items like aluminium lugs, Jumpers, binding Tape,

GI V cross-arm (75x40x6mm) with GI top Bracket (50x8 mm) including GI clamp (50x8)mm the standard as per enclosed drawing and specification as per Annexure "A")

30 mm² ACSR weasel Conductor (Single conductor length)

GI Channel X-arm including clamps and braces (the detail specification of x-arms for DP structure attached as annexure to this NIT)

8 Mtr. Long Pole( ST-410 SP15)

16kN Polymer Shackle Insulators

Galvinized Nuts and Bolts

M/S LOBZANG GURMET GOVT CONTRACTOR

M/S CHHEIRPON ENTERPRISES