Repair Renovation of Store Keeper and Store building at Central Store Complex under Store Division, APWD, Port Blair.Sw Providing IEI

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

a) Group-C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mmFRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mmFRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying of 9W LED lamp, B22, CDL/WW ( Make: Havells Model :-LED ADORE PLUS 9W B22 or equivalent ) in the lamp holder etc as required.

Supplying of LED batten CRCA housing box type luminaire suitable for 1 x 18/20W T8 LED retrofit tube lamp Make:-Bajaj Cat.No. BLRB-DB-118 or equivalent in Havells /Crompton /Philips complete with all accessories etc as required.

Supplying of 20W LED T8 Retrofit Tube light with polycabonate housing Make :- Bajaj- Model No. BLRB 20W LED or equivalent in Havells/Philips/Crompton

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying of 1 feet 5 W LED batten ( integrated ) ,WW/CDL/NW, Make: PHILIPS Model:- Astra Line 5W or equivalent in Crompton/Havells/Bajaj complete with all accessories etc as required.

Supplying of 10W PDC housing LED bulkhead luminaire with IP65 protection rating Make:- Bajaj Cat.No. BIBWP 10W LED or equivalent in Havells/ Philips/Crompton complete with all accessories etc as required.

Erection of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required.

Supplying of 1200mm sweep BLDC 5 star energy saving AC ceiling fan Make:- USHA 1200mm Techno Air BLDC 5 star or equivalent in Havells/Bajaj/Crompton/RR Fans/Orient complete with all accessories etc as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying of 300mm sweep Exhaust fan ( Metallic Range) Make: USHA-AEROCLEAN PLUS DBB GBD or equivalent in Bajaj/Havells/Crompton/RR Fans/Orient complete with all accessories etc as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

a) Upto 450 mm sweep

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 8 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying, Installation, testing and commissioning of ASHLOK make SEE brand safe earthing electro type-19, 50mm dia,length 2 mtrs and inner space to be filled with crystaline conductive mixture including filling up with electrodite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Supplying of PVC insulated and PVC sheathed aluminium conductor armoured XLPE power cable of 1.1KV grade of following sizes etc as required.Make:- Havells or equivalent in Polycab/Finolex/RR Cables/Anchor

a) 2 Core x 10 Sq.mm

Supplying of following sizeDWC HDPE PIPE along with all accessories like socket, couplers etc confirming to IS: 14930 PART- II Complete with necessary HDPE fittigs for protection of 1.1 KV grade under ground cable complete as required.

a) 50 mm dia (OD-50 mm & ID-38 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

a) Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

a) Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

a) Upto 35 sq. mm

NAVJEEVAN ENTERPRISES