REPAIR TO LEAKAGE, SEEPAGE FROM ROOF, IST FLOOR QTRS ETC, REP TO STAIR CASES AND CERTAIN MISC CIVIL WKS IN DAD COLONY SEC 35 B AND PCDA BLDG SEC 9 UNDER GE CHANDIGARH.

Amount

Taking down chowkats or frames not exc 1.5Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down shutter n exc.1 sqm and complete all as specified and directed.

Taking down shutters of any description exc 1Sqm and not exc. 2 Sqm each, complete all as specified and directed.

M&L Cutting holes in brick walls exc half brick but n.exc one brick in cement mortar or cement lime mortar and stone walls for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

S& F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm with single side prelam PVC sheet plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F Factory made PVC door shutter 30 mm thick ( style) 10 mm thick panel consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails & bottom rail;on either side & as gap insert for top rail & bottom rail: panelling of plain colour PVC sheet beading and joined together with solvent cement , suplpling & fixing in frame at site as per specifaction and drawing

M& L for Pressed steel frames of profile size 125mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primer including PCC 1:2:4 in backfilling of chowkats complete all as specified and as directed.

M& L for Pressed steel frames of profile size 105mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primerPCC 1:2:4 in backfilling of chowkats complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood (Kail) Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc,(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, cut and mitred beads for securing glass etc size of members of shutters as spd in SSR part I, section 8 complete all as specified

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-219 of HQ CE CZ Chandigarh complete all as specified and directed. Note : MS guard bars, sheets glass,wire mesh and painting shall be measured and paid separately

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per Drg No TD-219 of HQ CE CZ Chandigarh complete all as specified and directed. Note : MS guard bars, sheets glass, wire mesh and painting shall be measured and paid separately

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workon- forming to Fe.290.Gde-E-165

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc with powder coating (min thickness 50 micron). complete all as specified

S&F Anodised aluminium door shutters,aluminium section with style and top rail of section 80x44 mm,16 guage thick and bottom rails of section 112x44 mm of 16 guage thick , middle rail 150x44 mm of 16 guage thick including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, 01 No Tower Bolt, hinges/pivot,anodised aluminum snap beading screws etc complete all as specified.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section including necessary joining cleats, glazing clips, rubber packing, hinges,handles 2 Nos, 02 Nos Tower Bolt, anodised aluminium snap beading, screws etc. complete all as specified

S&F aluminium anodised (Deco) pattern grill 75x75mm size design No 102, 7.30mm thick including suitable F/H section frame fixed with aluminium plate screw to window complete all as specified and direcetd.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality not exc 0.50Sqm in each pane fixed with oil putty complete all as specified in repairs.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane

S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5sq. m in each pane complete all as specified and as directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified

S&F Aluminium (Dicast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and complete all as specified and directed.

S&F in repairs Aluminium (Dicast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and complete all as specified and directed.

S&F Aluminium rebated Mortice Lock vertical type size 100mm 04 Lever

S&F in repair Aluminium rebated Mortice Lock vertical type size 100mm 04 Lever

S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 75 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 150mm long Aluminium handles, cast type, anodised, all as specified and directed.

S&L Steel curtain rod (Fancy Type) of 20 mm dia including curtain rings complete all as specified

S&F Steel bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc including removing of debris out side MoD land complete all as specified and directed complete as specified and directed

M&L Rendering 10mm thick on ceiling, in cement mortar 1:3 finished the surface even and smooth without using extra cement , complete, all as specified

M&L Rendering 15mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete, all as specified

M&L Rendering 15mm thick on brick work or stone masonry surfaces in cement mortar 1:4 finished the surface even and smooth without using extra cement , complete all as specified.

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper and one coat of wall care putty over a coat of chalk whitening primer ncluding cleaning the floor / joinery, surfaces, glass panes complete all as specified. Make/Brand : Asian Paints/Berger/Nerolac

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper and one coat of wall care putty over a coat of chalk whitening primer ncluding cleaning the floor / joinery, surfaces, glass panes complete all as specified. Make/Brand : Asian Paints/Berger/Nerolac

M&L for preparation of newly plastered surface of walls and applying two coats of exterior grade acrylic emulsion paint over a coat of alkali resistant primer all as specified. Make/Brand : Asian paint (Apex Ultima), Berger paint ( weather coat all guard) Dulux ( weather shield max), Nerolac (Excel Total).

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming Fe 410-W(Gde-E-250) quality A

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe 290 (Gde-E-165)

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for including removing of debris out side MoD land complete all as specified and directed

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified.

Providing, cement concrete PCC 1:2:4 type B-1 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L 75mm thick Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate) as in sub base under floor/path all as specified and directed.

M&L 40 mm thick Plain cement concrete 1:2:4 Type B1 (20mm graded crushed stone aggregate) as in flooring, surfaces finished even and fair complete all as specified and directed.

M&L 25 mm thick Plain cement concrete 1:2:4 Type B0 (12.5mm graded crushed stone aggregate) as in flooring, surfaces finished even and fair complete all as specified and directed.

S&F Factory made prepolished precast cement concrete M-30, vibro compacted chequered tile 25mm thick in required size, shape & colour set jointed and pointed in neat cement sullry with grey cement and pigment over and including 20mm screed bed in CM 1:4 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non skid ,joint free Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exc 0.11sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and in any pattern and shade/colour as directed by Engr-In-charge.

M & L Double Charged Virified Ceramic tiles 8 mm to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match inlcuding screed bed of 15 mm thick CM 1:4 complete all as specified and directed complete all as specified and in any pattern and shade/colour as directed by Engr-In-charge.

All as per item No 64 above but in vertical surface (dado/skirting) to match the sahde of floor tiles laid over and including 10mm thick back coat in CM (1:3),complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . The tiles shall be laid in pattern with two or more colured tile including 10mm thick back coat in CM (1:3) on brickwork or concrete surfaces finished all in any pattern and shade/colour incl dismantling and re-fixing of electrical boards/points complete all as specified and directed by Engr-In-charge. Make-Somany or equivalent of Kajaria/Johnson

Taking up or down steel water tubings and connections of 15mm bore pipe including cleaning or re-fixing or removal to store , complete all as specified and directed.

M&L 15mm Tubes, medium grade' galvanised, with all GI fitting and fixed complete to walls and ceilings or laid in floors

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Brick wall complete all as specified

S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding all as directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F in repairs steel grating 100mm dia all as specified

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, all as specified.

S & F of aluminium snap grid false ceiling of panels of size 605 x 605mm using aluminium anodised wall angle of size 25 x 25 x 1.50mm thick fixed to walls with rawl plug and screws n. exc 1.50m c/c and intermediate panels using main "Tee" and cross "Tee" aluminium anodised section of size 35 x 25 x 1.50mm and 25 x 25 x 1.50mm thick suspended with and including 4mm dia GI wire n. exc 1.2m c / c and 12mm thick Gypsum Board in ceiling with 1mm plain PVC Sheet fixed to aluminium frame work with screws complete all as directed.

Welding in repairs not exceeding 2.5 cm in length and thickness of metal to be welded n exc 6 mm

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layers as on roof including any treatment complete all as specified and as directed by Engr-in-Charge

Demolition of Mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only or part thereof) including removing of debris out side MoD land complete all as specified and directed

M&L 50 mm thick Plain cement concrete 1:2:4 Type B1 (20mm graded crushed stone aggregate) as in Padding/flooring, surfaces finished even and fair complete all as specified and directed.

M&L for providing Screed bed or bedding layer of mortar 15 mm thick (using water proofing compound) for laying floor finishes in CM 1:4 screed bed under floor finishes complete all as directed. Note : Water proofing compound to be paid seperately.

M&L Providing & laying 3mm thick APP (Atactic polypropylene polymer) modified prefabricated five layer, weight not less than 3.60 Kg/sqm water proofing membrane, black finished, reinforced with non-woven polyster matt make as approved, consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by the same membrane manufacture, of density 0.87 to 0.89 Kg/ltr at 25 degree C temperature and viscosity 70-160 cps. Over the primer coat, the layer membrane shall be laid using butane torch and sealing all joints etc after preparing the surface complete as per standard practise as per manufacturer`s instructions including complete removal of old membrane/treatment. The vital physical and chemical parameters of the membrane shall be as under :- (1). Joints strength in longitudinal and transverse direction at 23 degree C as 650 /450N/5 Cms. (2) Tear strength in longitudinal and transverse direction as 300/250/5 Cms. Softening point of membrane not less than 150 Degree C. Cold flexibility upto 20 degree C when tested in accordance with ASTM (D-5147). (3) The Laying of membrane shall be got done through the authorized applicator of manufacturer of membrane only.

Laying old brick tiles laid bedded in 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement including cleaing of old brick tiles for re-use.

M&L 40mm thick brick tiles bedded in 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as directed.

Supply only Integral water proofing compound of approved make

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) including removing of debris out side MoD land complete all as specified and directed

M&L Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces B-1, 1:2:4 (using 20mm graded crushed stone aggregate) in CM 1:4 complete all as specified and directed

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc laid ,bedded and pointed in any mortar.

M&L for green Marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade Including grinding, rounding, chamfered edges, polishing etc complete all as specified and as directed.

All as item No 91above but as in vertical surface/in skirting etc.

Refixing of old steel tubing of 15mm bore including all fittings to walls, ceiling and laiding floors

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store

S&F 20mm bore medium grade tubes, glvanized with all fittings anf fixed complete to walls and ceilings or laid in floors

Refixing of old steel tubing of 20mm bore including all fittings to walls, ceiling and laiding floors

S&F in repairs 20 mm gate valves of gun metal with iron wheel head screwed both ends for iron pipe and fixed

S&F in repairs 15 mm gate valves of gun metal with iron wheel head screwed both ends for iron pipe and fixed

Disconnecting existing tanks of capacity 500 ltrs setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc

S&F in repairs 500ltr capacity rotational moulded polythylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

M&L taking out roots of trees penetrated through valves/concrete surfaces etc upto a depth of 600mm by chieseling , demolition of brick work , concrete work and pouring concentrated acids/Dr fixit chemicals upto the depth of roots and making good the disturbed portion.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, laid in trenches or in floors, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

M&L Repairing the edges of concrete chajjas, facias, slabs, columns and the like by providing PCC (1:2:4) type B0 incl all necessary form work and or provn of rendering 15mm th(average thickness) in cement mortar 1:3 , after applying a coat of cement slurry @ 3 kg/sqm of surface, finished even and fair, surface area not exc 300 mm wide in patches incl taking down swoolen/damaged plaster of concrete complete all as specified

Taking out/dismantling of exsting barbed wire fencing in any position of any size complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded Concrete, brick work,masonry, etc including taking out embedded portion and making good disturbed ground

MANDEEP ENTERPRISES

jaswant singh