PROVN OF SECURITY FENCING FOR ARO OFFICE COMPLEX, BEHIND PROPOSED SAINIK ARAMGRAH AND ADJACENT TO RLY STN FLYOVER AT FORT AREA NAGPUR AND CERTAIN SANCTIONED WORKS AT KAMPTEE

Amount

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out soft/ loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with fly ash brick, old size, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-2, (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brickwork or on concrete surfaces in cement mortar (1:6) and finishing surfaces even & smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed aggregate) as in coping etc, complete all as specified and directed.

S&F MS screw bolts of dia 5-10mm (machine made) with hexagonal or square at one end and screwed with other end or screwed both ends, length of bolt not exc 5cm long complete all as specified and directed.

S&F 10mm dia and over round bars in chain link fencing complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc (Each line wire to be measured) complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of wall complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for machine pressed pre-cast concrete interlocking tiles paver block any shape and size confirming to IS-15658-2006 of 60mm thick M-40 grade with grey cement & pigment complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, coping rounded or chamfered on edges complete all as specified and directed.

S&F posts and struts including cutting tops to shape as directed, drilling holes notching for wire etc. flat iron fillets including all necessary frilling bolting or riveting etc and similar work complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 cleat etc complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for form work to sides of concrete in foundations, footing base, base of columns, side and soffits of plinth beam and similar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and similar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape requred, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia in spacers, cut to length, bent to shape requred, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

M&L for mild steel TMT bars 8 to 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC finished even and fair complete all as specified and directed. (Note:- WPC will be measured & paid separately).

Supply only liquid water proofing compound of approved quality complete all as specified and directed.

M&L for rendering 10mm thick on surfaces of ceiling in cement mortar (1:3) and finished even and fair complete all as specified and as directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall complete all as specified and directed.

M&L for hardcore of gauge not exc 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface for plinth protection/ path complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed.

M&L for providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) as in sub base in floor/ paving etc complete all as specified and directed.

M&L for 50mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floors finish concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for non-skid colour ceramic tiles 7 to 8mm thick, area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layers of cement mortar 1:6 for laying of floor finishes complete all as specified and directed.

M&L for non-skid colour ceramic tiles 6 to 7mm thick (square or rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.38 Sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layers of cement mortar 1:4 for laying of floor finishes complete all as specified and directed.

M&L for coloured glazed tiles in vertical surfaces 350x 250x 7mm /450x 350x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plaster as in screed bed or bedding layers of cement mortar (1:4) on vertical surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for prepartion of new plastered surfaces and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed.

M&L for preparation of new undecorated plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and as directed.

M&L for MS framed work of Fe-290(Gde E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, MS Plates etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm long medium weight cold rolled mild steel butt hinges complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type anodised of 125mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long complete all as specified and directed.

S&F aluminium alloy, anodised, 250mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F steel windows with side hung shutters including butt type hinges with steel handle, and steel peg stay, complete with glazing and gauzing bars, dovetailed or welded complete all as specified and directed.

M&L for 4.0mm thick frosted sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each panes complete all as specified and directed.

S&F vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and urinal spreader, waste pipe complete all as specified and directed.

S&F vitreous china wash basin with vitreous china pedestal, white flat back of size 550 x 400mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F 15mm dia pillar cock fancy type, cast copper alloy, chromium plated complete all as specified and directed.

S&F PVC connection 15mm size, 450mm long with PTMT nuts on both side complete all as specified and directed.

S&F 32mm dia waste fittings, brass chromium plated for glazed ware sink, basins, etc with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 15mm dia stop valve/ angle cock chromium plated, fancy type, cast copper alloy high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed complete all as specified and directed.

Removing excavated material exc 250 m but not exc 500 m and depositing where directed as in soils complete all as specified and directed.

Supply, Fabrication and fixing of anodised aluminium doors fixed or openable including frame/ chowkats etc from hollow rectangular sections like chowkats of size 100 x 44mm x 1.59mm (appx), vertical styles of size 82 x 44 x 159mm (appx) top and middle rails of size 82 x 44 x 1.59mm (appx) bottom rails of size 114 x 44 x 1.59mm (appx) complete including necessary jointing cleats, glazing clips, anodised aluminium beading etc for securing glass, anodised aluminium fittings such as handles, other standard fittings, aluminium tower bolts - 2 Nos and accessories for locking arrangements etc complete all as specified and directed. Note:- Glazing and particle board shall be measured and paid for separately under respective items.

Supply, Fabrication and fixing of anodised aluminium windows, ventilators shutters, side hung type without sash bars, alumiium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packings, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21, 100mm long (2 No) suitable handle (1 No) complete all as specified and directed. Note:- Glazing/ gauzing shall be measured and paid for separately under respective items.

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilator shutters complete all as specified and directed.

M&L for 5.5mm thick tinted quality glass and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all specified and as directed.

M&L for 9mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination in fixed with screws to timber frame work/ aluminimum door panel complete all as specified and directed.

S&F aluminium grill for windows in approved design/ pattern by Engineer-in-Charge fixed with aluminium beading complete all as specified and directed.

S&F door closer hydraulically regulated, designation No 2, universal type, aluminium (Die cast body) suitable for door shutters complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, nodised, with hard drawn steel spring fixed in flloor complete all as specified and directed.

Devika Constructions

VIJ ASSOCIATES

Meet Road Lines

PURVA ENTERPRISES

S D WAGHAMSHI

M/s DS Khekde

Bidder Name

Meet Road Lines

khushal constructions

M/s DS Khekde

Devika Constructions

VIJ ASSOCIATES

S D WAGHAMSHI

PURVA ENTERPRISES