Installation & Commissioning of new RRI Indoor equipment and outdoor at HWH / RRI in connection with remodelling of yard and extension of PFs.

A-Installation & Commissioning of new RRI Indoor equipment and

Supply of Outdoor Units : 72 HP Installation,Testing and Commissioning of Hi efficient DC Inverter Side discharge VRF Outdoor units equipped with Variable refrigerant flow system 1 (Heating&Cooling ), comprising Inverter driven Scroll Compressor with a wide range of frequency from 15 to 120rps (R-refrigeran tgas). All the unit shall be provided with micro-processor based control advance refrigerant control, Liquid back flow protection, precise oil control techno- -logy, 3ph DC motor condenser fan motor ,sub cooling through dual tube heat exchanger & vari- -ous electrical protection like-phase sequence, high/low voltage protection, compressor overload protection, temperature & pressure protection. Nominal Capacity : 18 HP ( Make : O General / Fujitsu-General / Mitsubishi Electric / Panasonic / Samsung / Carrier / Toshiba / LG / Hitachi / Trane / Voltas ) Above/ 1135600.0

Supply of Indoor unit : Installation, Testing and commissioning of Floor Mounted AHU with double skin air handling units made of 50mm thick panels consisting of pre- plasticized G.I. casing of 0.8mm outside layer and 0.6 mm inside layer with polyurethane foam (PUF) insulation of minimum 40 kg/cum density factory injected between them by injection mould- -ing machine, complete with DIDW backward/ forward curve SA blower section with blower suit- -able for static pressure of 50mm WG, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick washable synthetic type air prefilters having efficiency 90% with belt drive package,drain connections & drain valve stainless steel (18G) drain pan with PUF insulation, necessary vibration isolation arrangement, canvas conn- - ection etc. complete as per specification and of following outdoor mounted thermal k sand witched puf insulation, fan section with TEFC EFF 1 motor, limit switch, emergency light, guard for inspection door, mixing box, return damper, fresh air damper, outlet damper, view- -ing glass etc. All dampers shall be of alluminium aerofoil blade damper. AHU should be compatible with R410A Refrigerant DX Type Coil with AHU Stater Panel. ( Make : Zeco / Edgetech / Waves ). AHU Capacity : 11500 CFM(28TR), Static pre- -ssure of Blower : 65MM Above/

Supply, installation, testing and commissioning of AHU Electronic Expansion Valve (EEV) Kit Above/

Supply, installation, testing and commissioning of AHU Separation Tubes Above/

Supply, installation, testing and commissioning of Wired Remote Above/

Supply, installation, testing and commissioning of AHU Control unit Above/

Supply of Out Door Units : 64 HP VARIABLE REFRIGERANT FLOW SYSTEM Installation,Testing and Commissioning of Hi efficient DC Inverter Side discharge VRF Outdoor units equipped with Variable refrigerant flow system (Heating&Cooling ), comprising Inverter driven Scroll 7 Compressor with a wide range of frequ- -ency from 15 to 120rps (R-refrigeran tgas). All the unit shall be provided with micro-processor based control advance refrigerant control, Liquid back flow protection, precise oil control tech- -nology, 3ph DC motor condenser fan motor,sub cooling through dual tube heat exchanger & various electrical protection like-phase sequence, high/low voltage protection, compressor overload protection, temperature & pressure protection. Nominal Capacity : 8 HP ( Make : O General / Fujitsu-General / Mitsubishi Electric / Panasonic / Samsung / Carrier / Toshiba / LG / Hitachi / Trane / Voltas ) Above/

Supply of Indoor unit including Installation, Testing and Commissioning of High Static Ductable Indoor Unit with nominal capacity 6 TR, air flow not less than 2294 CFM & sound pressure level not more than 51 db with Touch Panel Remote. ( Make : O General / Fujitsu-General / Mitsubishi Electric / Panasonic / Samsung / Carrier / Toshiba / LG / Hitachi / Trane / Voltas ) Above/

Supply, installation, testing and commissioning of Refrigerant Gas (R410a) Charging as per site requirements. Above/

Supply, Installation and Testing of Refrigerant pipe of following sizes with (19mm / 13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units complete with necessary connecting Y joints and other accessories as per following specifications, all Refrigerant Pipe Should Run on cable trays of required Size and should be complete with Supports, Hangers etc. ( from Sl. No. 10 to Sl. No. 16 ) : 41.28 mm O.D.(with 19 mm insulation ) Above/

38.1 mm O.D.(with 19 mm insulation ) Above/

28.6 mm O.D.(with 19 mm insulation ) Above/

22.2 mm O.D..(with 19 mm insulation ) Above/

19.05 mm O.D..(with 13 mm insulation ) Above/

15.8 mm O.D..(with 13 mm insulation ) Above/

12.7 mm O.D.(with 13mm insulation ) Above/

Supply, installation, testing and commissioning of rigid PVC Drain Piping of following sizes complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation ( from Sl. No. 17 to Sl. No. 19 ) : 40 mm dia Above/

32 mm dia Above/

25 mm dia Above/

Wiring of control cum transmission unit using two core, 1.5 Sq. mm Copper conductor cable along with conduit for looping between indoor & outdoor VRF system (Make - Lapp / Belden) Above/

Supply, installation/erection, testing and commissioning of 120 GSM GI Site Fabricated Duct as per specifications and drawings with the following sizes : ( from Sl. No. 21 to Sl. No. 23 ) : 0.63 mm (24G) Above/

0.8 mm (22G) Above/

1.0 mm (20G) Above/

Supply, Installation, Testing & Commissioning of Duct Thermal Insulation (MAKE- A- FLEX / K-FLEX / AEROCELL) by Providing and fixing of Nitrile Rubber insulation of 13 mm thick on duct complete with all accessory as required. Above/

Supply, Installation, Testing & Commissioning of Duct Acoustic Lining for Duct by Acoustic Insulation of 48 kg/cubic mtr. x 12mm thick Rigid Board with RP tissue and 30G Al. perforated sheet Above/

Supply, Installation, Testing & Commissioning of return air grilles/ diffusers as per specifications and drawings. ( Make - System Air / Premier / Green Air ). Supply of GI Duct Damper Above/

Supply of Aluminium Supply Air Supply & Return Air Continious Square Diffuser Above/

Supply of Aluminium Coller Damper Above/

Supply, Installation, Testing & Commissioning of Anti Vibration Rubber Pad. Above/

Supply, Installation, Testing and Commissioning of Suction Filter & Ball Valve for ODU. Above/ 3600000.0

Supply of outdoor type CSS of rating 06 KV / 415 V, 500 KVA, 3 Ph, 50 Hz, complete with DYn11 Cast resin Dry Type Transformer with Off circuit tap link having tapping range of +5% to 31 -5% in steps of 2.5%, Z% : 4% (IST), 11 KV, 630A, 21kA/3s 2 way non-extensible RMU, consisting of 1 No. Load Break Switch ( Motorised ) and 1 No. Fixed VCB ( Motorised charging & closing ), and LT ACB, 800A, 4P, 50kA with Microprocessor Based Release ( LSIG protection ) with RS-485 and 6 nos. outgoing MCCB, 4P, microprocessor based release ( LSIG ) including necessary HT, LT and control cabling works, internal earthing connections by GI strips etc. ( Make - Siemens / ABB / Schneider / EATON ) ( Please see detailed technical specification ) Above/

Installation, testing and commissioning of above CSS including cable glanding, socketing and plinth construction alongwith construction of Iron shed structure with transparent sheet top cover and MS grill structure duly painted at four sides of CSS Above/ 1915099.0

Supply of Fully motorised indoor extensible type Ring Main Units ( RMU ) of rated 33 Voltage ( Nominal / Max ) 6 / 11 / 12KV, rated current 630A, short time withstand current 21 / 26.3 KA for 3 sec., compact switch gear encapsulated in SF6 gas filled stainless steel tank complete with numerical protection relay and metering facilities and remote operation facility ( SCADA Compatible ) consisting of : a) Vacuum Circuit Breaker for Incomer & Outgoer - 4 nos. b) Bus coupler - 1 no. ( Make - Siemens / ABB / Schneider / EATON ) ( Please see detailed technical specification ) Above/

Installation, connection, cable glanding, testing and commissioning of above RMU Panel. Above/

Supply of Fully motorised indoor extensible type Ring Main Units ( RMU ) of rated voltage ( Nominal / Max ) 11 / 12KV, rated current 630A, short time withstand current 21 / 26.3 KA for 3 sec., compact switch gear encapsulated in SF6 gas filled stainless steel tank complete with numerical protection relay and metering facilities and remote operation facility consisting of : a) Vacuum Circuit Breaker - 1 no. ( Without BUS PT Panel, working as extension part of existing Schneider make RMU Panel. ) ( Make - Siemens / ABB / Schneider / EATON ) ( Please see detailed technical specification ) Above/

Installation, testing, connection, cable glanding, and commissioning of above single Panel RMU Above/

Supply of SCADA RTU ( Remote Terminal Unit ) comprise of PLC ( Programable Logic 37 Controller ), 02 nos. DI ( Digital Input Card ), 02 nos. DO ( Digital Output card ), 01 no. network card, 01 no. PSC ( Power Supply Card ) and 01 no. Ethernet gateway, 24V DC SMPS, Relay channels, Ethernet switch, Media Converter, 8 Port OFC LIU Box,1 KVA UPS including all power and control cabling works with erection, testing and commissioning. ( The above SCADA RTU Panel should be fully compatible with existing Vijio Citec SCADA system.) ( Make - Siemens / ABB / Schneider ) ( Please see detailed technical specification ) Above/

Supply of 6 Core Multimode Glass Fibre Optic Cable for other Sub-Station controlling from Main Sub-station SCADA room. ( Make - Dlink / Finolex / Belden / Molex ) Above/

Laying of cable underground through 32 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe. ( Cable will be supplied by Railway ) Above/

Conceal wiring on wall/ceiling/floor through PVC pipe of suitable diameter for Light point / Fan point / Call Bell point / Indication point / Glow Sign point by two nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and 40 neutral along with one no. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm., 1100V grade for Earth Continuity Conductor ( ECC ) including supply of cable, GI concealed box with modular cover plate, PVC pipe, junction / circular box, modular switch, ceiling rose and all other associated work along with make good of wall surface as its original condition. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) Above/

Conceal wiring on wall/ceiling/floor through PVC pipe of suitable diameter for 6A/5 pin plug point by two nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 41 1.5 sq.mm, 1100V grade for phase and neutral along with one no. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm., 1100V grade for Earth Continuity Conductor ( ECC ) including supply of cable, GI concealed box with modular cover plate, PVC pipe, junction / circular box, modular switch, modular plug socket and all other associated work along with make good of wall surface as its original condition. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) Above/

Conceal wiring on wall / ceiling / floor through PVC pipe of suitable diameter for 16A/6 pin plug point by two nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm., 1100V grade for phase and neutral along with one no. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm., 1100V grade for Earth Continuity Conductor ( ECC ) including supply of cable, GI concealed box with modular cover plate, PVC pipe, junction / circular box, modular switch, modular plug socket and all other associated work along with make good of wall surface as its original condition. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) Above/

Conceal wiring on wall/ceiling/floor through PVC pipe of suitable diameter for modular type Multi plug board consisting with three nos. 6A/5 pin modular plug socket, three nos. 6A modular switch, one no. 16A / 6 pin modular plug socket, one no.16A modular switch, one no.10A modular type MCB by two nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor 43 cable of size 2.5 sq.mm., 1100V grade for phase and neutral along with one no.single core, HRFR / FRLS 'grade, PVC insulated, copper conductor cable of size 1.5 sq.mm., 1100V grade for Earth Conti- nuity Conductor ( ECC ) including supply of cable, GI concealed box with modular cover plate, PVC pipe, 'junction / circular box, modular switch, modular plug socket and all other associated work along with make good of wall surface as its original condition. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) Above/

Conceal wiring on wall / ceiling / floor through PVC pipe of suitable diameter for Mobile Charging Plug Board consisting with four nos. 6A /5 pin modular plug socket, four nos. 6A modular switch with one no. 10A modular type MCB by two nos. single core, HRFR / FRLS grade, PVC 44 insulated, copper conductor cable of size 1.5 sq.mm., 1100V grade for phase and neutral alongwith one no. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm., 1100V grade for Earth Continuity Conductor ( ECC ) including supply of cable, GI concealed box with modular cover plate, PVC pipe, junction / circular box, modular switch, modular plug socket and all other associated work along with make good of wall surface as its original condition. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) Above/

Conceal wiring on wall/ceiling/floor through PVC pipe of suitable diameter for Window AC / Split AC / Water Cooler Point by two nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm., 1100V grade for phase and neutral along with one no. single 45 core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm., 1100V grade for Earth Continuity Conductor ( ECC ) including supply of cable, GI concealed box with modular cover plate, PVC pipe and each board comprising with one power unit which includes one double pole modular MCB, one single phase starter and one 25A socket and plug with indicating light similar to NORTH-WEST Cat.No.- ACPU 6M-BT and all other associated work along with make good of wall surface as its original condition. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) Above/

Conceal wiring on wall/ceiling/floor through PVC pipe of suitable diameter for Submain by two nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 46 4.0 sq.mm., 1100V grade for phase and neutral along with one no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm., 1100V grade for Earth Continuity conductor including supply of cable, GI concealed box with modular cover plate, PVC pipe and all other associated work along with make good of wall surface as its original condition. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) Above/

Conceal wiring on wall/ceiling/floor through PVC pipe of suitable diameter for Main 47 line by two nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 10.0 sq.mm., 1100V grade for phase and neutral along with one no. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm., 1100V grade for Earth Continuity Conductor ( ECC ) including supply of cable, GI concealed box with modular cover plate, PVC pipe and all other associated work along with make good of wall surface as its original condition. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) Above/

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway ) Above/

Supply of 6W Crysta chip on board (COB) downlight with swivel feature, warm white colour (3000K) LED accent light fitting material - aluminium, light source - LED, Watt - 6W, complete with LED and all other accessories, operating voltage 140V to 270V and frequency 50 Hz similar to Make - Havells, Cat.No. - LHEEGEPBIE1W006 or equivalent. Above/

Fixing, connection, testing and commissioning of above indoor LED luminaire fittings with suitable arrangement. Above/

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street light fitting will be supplied by Railway ) Above/

Fixing, connection and commissioning of BLDC Ceiling fan with suitable size GI clamps made of GI flat and GI nut-bolts. ( BLDC Ceiling Fan will be supplied by Railway ) Above/

Supply of BLDC Wall Bracket Fan of size 400 mm sweep suitable for operation on 1Ph, 220-240V, 50Hz supply system ( Make : Havells / Usha / Orient / Halonix / Atomberg / Crompton / Bajaj ) Above/

Installation, connection and commissioning of above Wall Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. Above/

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway ) Above/

Supply of SPN DB ( Metal Enclosure ), 6 way, 1Ph, 240V, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 300mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / Havells / C&S ) Above/

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement. Above/

Supply of TPN MCB DB ( Metal Enclosure ), 3Ph, 4 way per phase, 415V, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 300mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / Above/

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement. Above/

Supply of LED Signage Board containing script of officer's designation made of high 60 quality acrylic 8mm sheet with laser make - acast / ub / astari, in aluminium extruded slot of 24g and Light Emitting Diodes - Red & Green ( Make / brand of LED chip - NICHIA, OSRAM, SEOUL, PHILIPS, LUMILEDS, AVAGO, CREE ) complete with necessary electronic driver and all other accessories including fixing, connection, testing and commissioning of LED Signage Board with suitable clamps / fixtures. Above/

Supply of Auto Change Over control and distribution panel for colour light signalling of rating 60A, 1Ph, 240V, 50Hz in 25KV AC Traction System as per RDSO's specification no. TI / SPC / PSI / CLS / 0023 or latest including installation, connection, testing and commissioning of above panel board along with terminal cable connection ( Make : RDSO approved sources ) Above/ Square

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm 62 (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10% Above/

Supply of On Load Manual Change Over Switch of capacity 400 A, 415V, 50Hz, 4P complete with all accessories fitted in metal enclosure including fixing, testing and comissioning ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) Above/ 1323928.0

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items : a) MCCB, 4 Pole, ( 160 - 400 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral 64 overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 5 nos. b) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with above features of (a) - 6 nos. c) MCCB, 4 Pole, ( 25 - 63 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with above features of (a) - 9 nos.d) Tinned Copper Busbar (4 Bar) each of capacity 600 Amps., 415V, 50 Hz. - 1 set. e) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 20 nos. f) CT of suitable ratio for MFM - 60 nos. g) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 66 nos. h) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays for SCADA RTU connectivity etc. - 1 job. i) Fabrication work for above panel - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Elmeasure / Stelmec / HPL / Socomec / Anchor ) Above/

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement Above/

Supply of MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V AC, 50Hz of capacity 25-32A / 32-40A / 40-50A, 4 Pole complete with metal enclosure with spreader terminals, LED indication lamps for phases including fixing, connection, testing and commissioning. ( Make of MCCB and Metal Enclosure - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) Above/

Supply of Dust and vermin proof metal Busbar Chamber made of 16 SWG ( 1.6mm ) 67 MS sheet duly powder coated consisting of 4 nos. tinned copper busbar of each bar of capacity 63 Amp, 6 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement. ( Make - Havells / Standard / HPL / LK (Formerly L&T) / C&S / Indoasian ) Above/

Supply of Junction Box made of 14 SWG GI sheet of size 450 mm x 300 mm x 250 68 mm consisting with 2 nos. 63A porcelain fuse units (kitkats) conforming to IS:2086 -1993 complete with hinged door with locking arrangement duly painted with two coats of paint after one coat of anti-corro- sive Red Oxide paint as per Sr. DEE/G/HWH's Drawing No. MISC / E / 2 / 05 including fixing, connection and commi- ssioning of above Junction Box on AT Mast with GI clamps made of GI flat of size 40mm x 6mm with GI nuts-bolts. Above/

Supply of FRP Cable Tray ( Perforated ) type ( Width x Collar x Thick ) - 200 mm x 50 mm x 4 mm including fixing, connec- tion, testing and commissioning of above cable tray with necessary arrangement ( Make - RMC Switchgears / Sintex / Fiber Tech Composite / Ferrotech / Grasp / OBO Bettermann ) Above/

Supply of Coupler Plate with S/S 316 Bolts ( Width x Collar x Thick ) - 50 mm x 170 mm x 4 mm of 8 sets including fixing, connection, testing and commissioning of above coupler plate with necessary arrangement ( Make - RMC Switchgears / Sintex / Fiber Tech Composite / Ferrotech / Grasp / OBO Bettermann ) Above/

Supply, jointing, testing and commissioning of Straight Through Jointing Kits ( Heat shrinkable ) suitable for XLPE / PVC insulated stranded Aluminium conductor cable of size 3 x 70 / 95 / 120 sq. mm., 11 KV grade complete with all accessories ( Make - m-seal / Raychem / Mahindra / Densons / 3M ) Above/

Supply, jointing, testing and commissioning of Indoor End Termination and Jointing Kits ( Heat shrinkable ) suitable for XLPE / PVC insulated stranded Aluminium conductor cable of size 3 x 120-150 sq.mm., 11 KV grade complete with all accessories ( Make - m-seal / Raychem / Mahindra / Densons / 3M ) Above/

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe. ( Cable will be supplied by Railway ) Above/

Trenching, laying under road / track through 100 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway ) Above/

Drawing of cable on wall / structure with suitable size and shape GI clamps including supply of suitable size GI Clamp and GI nut-bolts and commissioning of cable ( Cable will be supplied by Railway ) Above/

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway ) Above/

Trenching and laying of cable under ground by soil cutting through suitable dia HDPE pipe including supply of HDPE pipe alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway ) Above/

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard Code of Practice for earthing IS : 3043 - 1987, Reaffirmed - 1996 should be followed ) Above/ 3744807.0

Goods & Services Tax ( at present @ 18% )