Improvements to Road connecting NH-69 to Karamaradi Gate (Shanimahathma Temple) including Cross road connecting Kambathanahalli road in Madhugiri Town, Tumkur District. JOB No (CRIF-KNT-2026-27-160)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned including removal and disposal of top organic soil not exceeding 150 mm in thickness including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work (for new roads) In area of light jungle - By Mechanical Means using Dozer"

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for subgrade construction including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work

Cable Duct Across the Road-Providing and laying of a reinforced cement concrete pipe duct, 600 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipe as per IRC:98-1997, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98 - 1997 and approved drawings, including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work Single row for one utility service

Construction of Subgrade and Earthen Shoulders : Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work (New road formation)

Granular Sub-Base with Close /Coarse Graded Material (Table:- 400-1) Plant mix method. Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work (Compacted thickness) Grading-V Material (Close graded) as per job mix

Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete, including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work (Compacted thickness)- Laying using Grader as per job mix

Tack Coat: Tack Coat on Bituminous surfaces: Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work

Bituminous Concrete: Grading -II : Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials, labour, usage charges of all machinery, loading, unloading,stacking, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work- 30-40 mm compacted thickness as per job mix

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approved grade cement at 400 kg/Cum, coarse and fine aggregate conforming to IS 383, coarse aggregate as per table 600- 3, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades and alignment, as per drawing, chairs to dowel bars, textured with texturing machine finishing and curing _including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work (Compacted thickness)

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing,including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work-60 Cm Equilateral Triangle