Estimate for strengthening of bank through counter berms and relining of damaged portion/patches in slice RD 150000 - 161200 and construction of cross regulator at RD 122000 of Ladhuka Disty.

Amount

Ordinary Jungle Clearance of both banks running Minor having Discharge exceeding 1.5 Cum/s but upto 4.5 cum/s [CSR item no. 26.24-b]

E/Work for lip cutting of irrigation Channels inclusive of all allowances, lead and dressing (upto 1.50 mtr depth) (CSR item no. 19.19)

Dressing of side slopes and preparation of sub grade for lining complete in all respect as per PWD specifications and engineer-in-charge.

Extra for laying earth/fly ash as per specifications for compaction in 20 cm layers and dressing, watering , rolling as per specifications for compaction. As per CSR item no 24.5(b) (i),(ii)&(iii) and dressing, watering , rolling as per specifications for compaction. As per CSR item no 24.5(b) (i),(ii)&(iii)

Single layer brick lining for irrigation channels (Distributaries and minors) or section of all depths consisting of first layer of 12.5mm thick cement plaster 1:5 on subgrade and finished, second layer of 10mm thick cement plaster 1:3 properly rendered and finished, 75 mm bricks laid in 1:3 cement sand mortar over second layer (CSR item no. 19.20(i) )

Laying brick on edge coping 229mm wide and 115mm thick in cement sand mortar 1:3 as per PWD specifications i/c supply of material complete in all respect. (CSR item no. 19.31)

Excavation of soil using hydraulic excavator and hydraulic tractor trolley including cutting and loading in trolley and transporting to the embankment location with all lifts and leads including cost of earth complete in all respect, but excluding royalty.

Making dewatering arrangement by pumping set 4'' *4'' (Tractor driven) for open dewatering

Extra for pudding work

Excavation in soil (any type) using Hydraulic Exacavator CK 90 ,Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting trimming bottom and side slopes , in accordance with requirements of grades and cross sections including all lifts and leads upto 30 m ( CSR 6.19)

Dismantling of brick masonary in cement

PCC M-10 Cement Concrete in Foundation Complete as per drawing and technical specification using batching plant. (CSR Item No. 10.12 )

R.C.C M25 in complete as per drawing and specifications hieght upto 5 meters. (C.S.R 21.7E/ ii)

R.C.C M20 complete as per drawing and specifications hieght upto 5 trs. (C.S.R 21.32 E/a/ ii)

Supplying Fitting and placing HYSD Bar Reinforcement in sub structure complete as per drawing and technical specifications. CSR 21.33

Supply and laying Brick Ballast as graded filter beneath CCM Blocks

Extra for compaction of Earth including laying earth in cm layers watering and rolling to specifications Csr24.5 b (I,ii,iii)

Rehandling of Earthwork with lead 30 meters

PCC Cement concrete 1:4:8 nominal mix in foundations with crushed stone aggregates 40 mm nominal size mechanically mixed placed in foundation and compacted by vibration including curing for 14 days (CSR 10.11 /b/ii)

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 10 mm th.)

Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (100/44)

Supply, Providing and fixing of Stainless steel Bolts & nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

CI Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside for spindle complete including in all charges.

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 55mm dia

Supply and fixing of spindle cover

Providing & fixing clamp plate, complete in all respects.

Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade f(16.17)

Providing and fixing Skin Plate 8 mm

Providing and fixing ISMC

Providing and fixing ISA 65X65X6mm @ 5.8 Kg/m

Supply of multi purpose Synthetic hetiv grease

Supply of Diesel

Supply of Mobil Oil

Providing and fixing of chequred plate

Providing and fixing M.s Plate i.e Stiffner Plate, , Top Base Plate, bottom base plate, ladder base plate, Square bar, flat plate Etc

Providing and fixing ISMB 175 mm @19.6 kg/meter

Providing and fixing 50 Nb Pipe

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Providing and fixing Sqaure hollow section

Providing and fixing Stainless steel flat, complete in all respescts.

Providing and fixing ISST 150*75 MM @15.7 KG/M

Providing and fixing ISMB 200X100 mm @25.4kg/meter

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Providing and fixing M.S. Shaft up to 6ft long 1.5 inch dia with adjusting coupling complete.( 55mm dia)

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In ordinary soil. Depth upto 3 m.

Any Other Item

VARINDER KUMAR CONTRACTOR (BID ID -604241)