Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.4 LAccepted-AOC R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | L1 | Accepted-AOC L1 | |
| 2 | L2₹18.0 L+₹1.2 L (7.13%)Rejected-Finance HIMALAYA COMPLEX MAIN BAZAR LEH LADAKH 194101 J K | LEH | LEH | JAMMU AND KASHMIR | 194101 | L2 | Rejected-Finance L2 | |
| 3 | L3₹20.0 L+₹3.2 L (19.1%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
1 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Khumbathang
GE Khumbathang
CERTAIN B/R REPAIR/MAINT OF OTM ACCN AT HANUTHANG, ACHINATHANG, BATALIK AND BIAMAH IN THE AOR OF AGE BR-II KHALTSI UNDER GE KHUMBATHANG
2023_MES_584473_1
GE-KHU-25-2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
Khaltsi
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹40,000
4 May 2023
6 Mar 2023
3 Apr 2023
6 Mar 2023
1 Apr 2023
20 Mar 2023
Amount
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.
M&L for Precast cement concrete block masonry type C1 1:3:6 (using 20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:4), complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 10 mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15mm thick cement plaster in cement mortar (1:4) on brick work or concrete surface and finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L preparing new plastered surfaces of walls including cornices, pillasters etc. and applying two coats of oil emulsion distemper over and including one coat of chalk whiting preparatory to distempering complete all as specified and directed by Engr-in-Charge.
M&L preparing new plastered surfaces of walls including cornices, pillasters etc. and applying two coats of cement base paint over a coat primer complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises., complete all as specified and directed by Engr-in-Charge.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge.
M&L for 100mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in fdn and subbase to received top layer complete all as specified and as directed by Engr-in-Charge.
M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate as in flooring and surface finished rough all as specified and as directed.
M&L 20-25 mm thick machine cut kota stone slab flooring jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick screed bed of CM 1:4 over neat cement slurry @ 3 Kg/Sqm over sub base including rubbing and polishing complete all as specified and directed by Engr -in Charge.
M&L for Vitrified ceramic (Light Shade) tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed with CM(1:4) 15mm thick for laying floor tiles complete all as specified and directed by Engr-in-charge.
S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick sreed bedding layer in CM 1:4 complete all as specified and directed by Engr-in-charge.
S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick sreed bedding layer in CM 1:4 complete all as specified and directed by Engr-in-charge.
M&L machine cut Granite slab flooring 20mm thick over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shed of the slab incl grinding and polishing complete all as specified and directed by Engr-in-Charge.
S&F glazed coloured ceramic tiles 350X250X7mm/ 450X350X7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3 complete all as specified and directed by Engr-in-charge.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall
S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
All as per srl item No. 20 here-in-before but except sheeting
M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge ..
M&L for preparation of old surfaces of steel of any description , over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge ..
Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets
S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed with nails to timber frame work as in walls complete all as specified and directed Engr-in-Charge.
S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on walls complete all as specified and directed by Engr-in-Charge.
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work
M&L for Plain fillets of second class soft wood, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L for plain fillets of second class soft wood (KAIL), sectional area n. exc. 6 Sqcm moulding as in cornices, picture rails and the like complete all as specified and directed by Engr-in-Charge.
M&L for Plain fillets of second class soft wood, sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or bradsin lipping complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
Taking down shutters of any description not exc. 1.00sqm for refixing or removal to MES store yard all as directed.
Taking down shutters of any description exc. 1.00 sqm but not exc. 2.00sqm for refixing or removal to MES store yard all as directed.
M&L for 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
M&L for 2nd class softwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors.
M&L for 35 mm thick, factory made, glazed and skelton shutter of Second class soft wood, open rebated and prepared to received glass, gauge, etc. (without sash bars) edges of framing plain, chamfered or round, fitted without and mitred beads for securing glass, etc; sizes of members of shutters all as specified in SSR Part-I section 8 clause 8.24(a).
M&L for 30mm thick, factory made, glazed and skelton shutter of Second class soft wood, open rebated and prepared to received glass, gauge, etc. (without sash bars) edges of framing plain, chamfered or round, fitted without and mitred beads for securing glass, etc; sizes of members of shutters all as specified in SSR Part-I section 8 clause 8.24(a).
M&L for preparation of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F 100mm long butt hinges, medium weight, cold rolled mild steel
S&F 75mm long butt hinges, medium weight, cold rolled mild steel
S&F of 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.
S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.
S&F of Aluminium door window frame for door,window / ventilaror/partitions with one or more rebate including joining cleat for fixing etc (for double glazing shutter), complete all as specified and directed by Engr-in-Charge.
S&F of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles (150mm) 02 Nos in each door, hinges (100 mm) 03 Nos in each door, anodised aluminum snap beading screws etc. complete all as specified and directed by Engr-in-Charge.
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads in square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.
S&F 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and fixed in aluminium frame with aluminium beading complete all as specified and directed Engr-in-Charge.
S&F 100 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed by Engr-in-Charge.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed by Engr-in-Charge.
S&F galvanised iron, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors in any length of 15 mm pipe complete all as specified and directed by Engr-in-Charge
S&F galvanised iron, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors in any length of 20 mm pipe complete all as specified and directed by Engr-in-Charge
S&F 25mm outer diameter 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr-in-Charge.
S&F in repairs vitreous china wash hand basin (flat black) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified and directed by Engr-in-Charge.
S&F in repairs vitreous China Squatting pan 'Orrisa' pattern size 580x440mm white with integral foot rest, and jointing to PVC/CI bend and flush pipe complete including making good to floorcomplete all as specified and directed by Engr-in-Charge.
S & F in repair Vitreous China wash down pedestal pattern EWC, white and plastic water closet pan and trap including connection to drain and to flushing pipe antisyphonage pipe etc, jointing to PVC/CI and flush pipe including making good to floor complete all as specified and directed by Engr-in-Charge.
S & F in repair for PVC valveless, syphonic action type, flushing cistern 10 lts capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge
S&F in repair vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement incl provn of flush pipe, grating and union for discharge pipecomplete all as specified and directed by Engr-in-Charge.
S&F in repair vitreous china urinals bowl ,flat back of size 465 x 355 x 265 mm with grating and union for discharge pipe, complete including providing and fixing plugs , bedding urinal against wall in cement mortar 1:2 , securing urinal to pluigs with and including 60 mm long brass screw , pointing around urinal back in cement incl provn of flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge
S&F in repairs for 15 mm bore bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm bore dia Stop valves, chromiun plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm bore Pillar taps, chromiun plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in Charge.
S&F in repair 15mm bore PVC connection 450mm long both ends screwed with brass cap complete all as specified and directed by Engr-in-Charge.
S&F in repair rotational moulded polyehtylene water storage tank of 500 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-Charge.
S&F in repair rotational moulded polyehtylene water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-Charge.
S&F in repair HDPE water storage tank of capacity 500 ltr, cylinderical vertical type , 3 layer, insulated with 75mm thick PUF insulation of density 48kg/cum covered with lid having locking arrengment including flot vale high prassure PTMT with epoxy coated aluminium rod & high dencity plastic ball secured for iron pipe and fixed of 15mm bore complete all as specified and as directed by E-in-Charge.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarft wall or including fixing cantilever brackets and connecting union to pipe , overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mmcomplete all as specified and directed by Engr-in-Charge.
S&F in replacement of health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-charge.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 40,840.00 and any other reduction if any from quoted amount.
JK Technical Services
M/S LIBE & CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .