Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.9 LAccepted-AOC GROUND FLOOR 66A BLOCK F GALI NO 4 HARI NAGAR EXTN PART 2 66A BADARPUR BADARPUR SOUTH EAST DELHI SOUTH DELHI DELHI 110044 | SOUTH EAST DELHI | DELHI | 110044 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹24.5 L+₹49,269.55 (2.06%)Rejected-Finance NO 9 LAKSHMI NIVAS SOMASHETTAHALLI CHIKKABANAVARA POST BANGALORE 560 090 | BENGALURU URBAN | KARNATAKA | 560090 | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 3 | L3₹25.2 L+₹1.2 L (5.12%)Rejected-Finance | L3 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 4 | L4₹25.6 L+₹1.7 L (6.98%)Rejected-Finance | L4 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 5 | L5₹28.8 L+₹4.9 L (20.3%)Rejected-Finance NO 650 3RD CROSS MATHIKERE BANGALORE 560 054 | BENGALURU URBAN | KARNATAKA | 560054 | L5 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹53,100
Closing Date
24 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli Bangalore 560013
8705 ADDN ALTN TO BLDG NO P 179 HQ BLDG AND PROVISION OF COVERED ENCLOSURE AT VARIOUS LOCATION OF E ITI AT AF STATION UNDER GE M AF JALAHALLI BANGALORE
2022_MES_554456_1
8705/E8
Open Tender
Civil Works
Item Rate
152 days
Garrison Engineer M AF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT PUBLIC FUND ACCOUNT
₹53,100
19 Jan 2023
26 Sept 2022
26 Oct 2022
26 Sept 2022
24 Oct 2022
11 Oct 2022
26 Sept 2022 - 3 Oct 2022
Amount
Schedule 'A' Part I (B&R) Works. (Item No 1 to 114) Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level
Material and labour for 25mm thick cement concrete 1:2:4 type B-1, using 20mm graded stone aggregates as in sub floors etc.
Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor.
Material and labour for Vitrified Ceramic tiles 10mm thick (Square/ rectangular) polished, dark shade, area of each tiles exc 0.18sqm not exc 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles all as specified and directed
All as per item No 04 above but in skirting including necessary cutting of tiles
Material and labour for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
All as per item No 06 above but in skirting including necessary cutting of tiles
Material and labour for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc.
Material and labour for ceramic coloured tiles of size 300x200mmx7 to 8 mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles and all as specified and directed.
Supply and fixing Gl frame work for seamless ceiling of grid size 605 X 605mm comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 450 mm centre to centre.
Supply and fixing Hangers 4 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
Material and labour for for providing 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)
Material and labour preparation of newly plastered surface of ceiling of any description and applying two coat oil bound distemper over one coat primer over complete all as per specified and directed by Engg-in- Charge.
Cutting openings, through stone walls with proper care, for door, window and other openings or enlarging existing openings. Converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks/stones, hard-core, etc.. to store and rubbish not exc. 50m
Material and labour for Reinforcement cement concrete Type B1, 1:2:4, using 20mm graded stone agg, as in beams, cantilever, bressummeres lintels over 1.50m span complete all as specified and directed.
Material and labour for TMT bars 10 mm dia and over cut to length bent to shape required including cranking, hooking ends etc, and binding with and including mild steel wire (annealed) not less than 0.90 mm dia.
Material and labour for TMT bars 6mm to 8 mm dia in stirrups cut to length bent to shape required including cranking, hooking ends etc, and binding with and including mild steel wire (annealed) not less than 0.90 mm dia.
Material and labour for Form work to sides and soffits of floor and roof beams, beams hunching, girders, bressummers, lintels and cantilever, shelves including supports over hangs etc rough finished surfaces of concrete ( curved ) complete all as specified and directed.
Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening all as specified and directed
Supply and fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site all as specified and directed
Supply and fixing 150 mm Aluminium, anodised, barrel tower bolts incl key of extruded section and fixed
Supply & Fixing 125 mm Aluminium handles, cast type, anodised
Taking down Chowkhat or frames exceeding 1.5 Sqm nexc 4 sqm each with shutters(Without taking off shutters from the frames) and all as specified and directed.
Supply and fixing Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, incl nexessary holdfast, demolition and concrete filling put together with glue pinned at joints, and all as specified and directed.
Supply and fixing 35mm thick hard wood framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and all as specified and directed
Supply and fixing Butt hinges, medium weight cold rolled mild steel and fixed 100mm size.
Supply and fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed
Material and labour for making groove in plaster of size 10mm width and 8mm depth in junction of wall and Col/Beam and applying Sika Primer 3N and filling with Sikaflex Construction (AP) with 112gm sealant/rm incl thermocol rod backup as per manufacturer's instructions
Material and labour for Dismantling water tanks and removing to store
Supply and fixing three layer Rotational moulded Polyethylene water storage tank - 500 litres capacity (cylindrical vertical with double layered, threaded top cover) hoisted and fixed in position incl nipple all as specified in SSR part I.
All as per item No 30 but in repairs
Supply and fixing 25 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe of following sizes
Supply and fixing 25 mm dia ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.
Supply and fixing 16 mm dia CPVC ball valve all as specified
Supply and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings/Special fittings(measured separately) on walls/ceilings of 16 mm outer dia of pipe complete all as specified
Supply and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings/Special fittings(measured separately) on walls/ceilings of 20 mm outer dia of pipe complete all as specified
Supply and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings/Special fittings(measured separately) on walls/ceilings of 25 mm outer dia of pipe and all as specified and directed.
Material and labour for Bib taps cast copper alloy fancy type chromium plated 15mm bore fixed complete
Supply and fixing PVC low level flushing cistern 10 liters capacity (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, Joint between flushing pipe and socket of W.C. pan pre-made, if any complete all as specified and as directed.
Supply and fixing vitreous china wash down water closet (pedestal pattern) white with "S" or "P" trap (excluding flushing cistern and flush pipe) including new PVC seat cover and all as specified and directed.
Supply and fixing in repairs for CP brass health faucet along with flexible pipe and stay complete all as specified and directed.
Supply and fixing of Toilet paper holder of vitreous china white in colour fixed to walls with chromium plated (CP) brass screws all as specified.
Supply and fixing Brass tubular towel rail chromium plated 20 mm dia 'D' type 60 cm long between flanges
Supply and fix vitreous China urinals, Half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.
S& F of 15mm dia concussive push button taps of cast copper alloy, chromium plated screwed for iron pipe and fixed
Supply and fixing Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum wt 60 gms)
Material and labour for Marble slab (Makrana doogri)18 to 20mm thick (table rubbed and polished) in partition, set cement mortar (1:4) complete
Supply and fix wash basins, vitreous China (flat back or angle back type) size 550x400 mm, including cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and as directed
Supply and fixing CP soap disk fixed with screw to wall complete
Supply and fix 15 mm bore fancy type pillars taps chromium plated cast copper alloy with capstan head, long screwed shanks complete all as specified and as directed.
Supply and fix waste coupling of PTMT (half or full threaded) Minimum weight 32mm- 45gms complete all as specified and as directed.
Supply and fixing angular stop valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore complete
Supply and fix PVC flexible waste pipe 32/40/50mm dia,min 60cm length complete all as specified and as directed.
Supply and fixing PVC connection 15 mm bore, 450 mm long complete with both ends unions.
Supply and fixing 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement
Supply and fix 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.
Supply and fix 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.
Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm
Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm
Supply and fixing PVC (SWR) junction single(single Y) equal or unequal with access door bore of pipe 110 mm
Supply and fixing PVC (SWR) reducers 110 mm
Supply and fixing CPVC pipes Brass Tank Adaptor of 20 mm outer dia of pipe
Supplying and fixing of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA) CPVC complete all as specified.
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m deep for foundation / for laying cables , and getting out in hard/dense soil.
Material and labour for Plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation , filling and mass concrete.
Material and labour pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:4 .
Material and labour rendering 10 mm thick cm 1:4 on brick /concrete surfaces finished even and smooth without using extra cement
Material and labour for salt-glazed stoneware drain pipes 150mm dia laid in trenches and jointed as specified
Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in bed to drain pipes of bore 150 mm bore including packing under and hunching against the sides of pipes after they are laid and tested.
Material and labour for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in copings/benching of manholes including weathering rounded/chamfered angles and throating as directed including necessary form work. Exposed surfaces of concrete shall be finished even and smooth with out using extra cement.
Cutting into existing manholes for connecting new drains, making good to pipes and rendering ,cutting out existing benching and forming branch channel, half round or 3/4 section in cement concrete1:2:4 type B1 smooth finished and reforming benching as required, internal dia of pipe150mm
Material and labour for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in CM 1:4 as in cover slab including all necessary form work .
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil obtained from excavation.
Removing the extra soil / excavated soil from site n exc 50m in distance and depositing where directed at a level above the starting point complete all as specified and directed.
Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of oil emulsion distemper and all as specified and directed.
Material and labour for preparation of old surfaces of ceiling including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of oil emulsion distemper and all as specified and directed.
Material and labour for 3mm thick wall putty on walls including complete removal of existing removal of existing any type of treatment.
Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of white wash and all as specified and directed.
Material and labour for preparation of new surfaces of wall and applying three coat of white wash and all as specified and directed.
Material and labour for preparation of old surfaces of ceiling including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of white wash and all as specified and directed.
Material and labour for preparation for old steel surfaces, and applying one coat of synthetic enamel paint all as directed.
Taking down Chowkhat or frames exc 1.5Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames).
Supply and fixing Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed
Supply and fixing Powder coated Anodised aluminium window and ventilator shutters, sliding / fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
Supply and fixing sheet glass 5.50mm thick exc 0.50 Sqm each fixed to aluminium frame work as in position
Material and labour Granite 20mm (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite
Supply and fixing Venetian blind vertical type including aluminium powder coated rail, arrangements fixing to wall etc complete
Supply and fixing brass mortise lock (4 levers), vertical type, size 100mm long complete all as specified and directed
Supply and fixing door closer hydraulically regulated, Alumium die cast body ,designation No 1 universal type, suitable for door shutter complete all as specified and directed
Supply and fixing in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts of mild steel heavy dut and fixed complete
Excavating in post holes (or similar holes) in soft/ loose soil each n exc 0.5 Cum, getting out, returning, filling in , removing surplus soil to distance not exceeding 50 mtr and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and directed.
Material and labour Cement Concrete 1:2:4 type B-2 (using 40 mm graded crushed stone agg as in foundation filling or for mass concrete complete all as specified and directed.
Material and labour Rolled sections/rect tubes as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410W (GdeE-250) qualityB
Supply and fixing MS Steel work in tubular trusses including stanchions special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240
Material and labour for 0.50mm thick Pre painted Galvalum aluminium zinc coating GI based corrugated steel sheet AZ150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.
Material and labour for providing two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10cm in width or girth, not otherwise described and all as specified and directed.
Material and labour for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 250-w quality B all as specified and directed.
Surface Excavation not exc 30cm depth and avg 15cm depth and getting out hard soil complete all as specified.
Material and labour for PCC 1:4:8 type D2 using 40 mm graded agg as in flooring 75mm thick complete all as specified
Material and labour for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes
Material and labour for Chequered cement concrete tiles 30cm x 30cm x 22mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed
Material and labour for broken stone boulders hard core of gauge n.exc 63mm deposited spread and level laid in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
Supply and fixing MS work in circular tubes, compound girders and stanchions, lattice girders, aerial masts, staging for water tank and the like including caps, bases, splices etc built up from two or more beam or channel sections or angle with plates, including all lattice bars, stiffeners, gusset plates etc conforming to Fe-410w (Gde 250) quality B and all as specified and directed.
Supply and fixing Joist, channel, angles, or tee sections, fixed independent without connecting plates, etc. (cut to ordinary length i.e. within 20mm of the length indicated) of Fe- 410W (Gde -E-250) quality B and all as specified and as directed.
Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
Material and labour Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Removing excavated material exc. 50m but n.exc 1.5 Km and depositing where directed at a level above the starting point complete all as specified and directed.
Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Material and labour for 100mm thick Cement concrete type D-2 1:4:8 using 40mm graded aggregate as in sub base and all as specified and directed.
Material and labour for 50 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring finishing the surface even and smooth without using extra cement all as specified.
Supply and fixing glass dividing strip 3 mm thick 38 mm wide and insert in position to conform to design complete all as specified and directed.
Material and labour for Pre-Cast PCC 1:3:6 type C-1 (20mm graded agg) cement concrete block masonry with solid blocks exc 10cm in width and set in CM 1:6 and all as specified and directed.
Material and labour for rendering 15mm thick in CM 1:4 on concrete/brick surfaces rough finished and all as specified and directed.
Schedule 'A' Part II (E&M) Works. (Item No 115 to 165) Taking down carefully copper/aluminium point wiring (light, fan, Power) complete fittings such as switches , ceiling roses pendants , regulators sockets light fittings etc removing to store for keeping in safe custody or for taking credit and making good disturbed surface of wall, floors , roof etc all as specified.
Material and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm on surface including provn of metal flush box duly sunkened with modular white cover plate with frame of suitable size for mounting modular switch, socket and regulator along with earth wire of PVC insulated, unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed for under mentioned items. (Note : Cost of for cutting chasing and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.)
All as per item Sl No 116 here in before but for one ceiling fan point controlled by one switch one way 5 Amps
All as per item Sl No 116 here in before but for one wall mounted fan point controlled by one switch one way 5 Amps
All as per item Sl No 116 here in before but for One exhaust fan point controlled by one switch one way 5 Amps
All as per item Sl No 116 here in before but for One bell point controlled by one bell push one way 5 Amps
All as per item Sl No 116 here in before but for One socket out let 5 Amps independent but below the switch board of light points in same vertical plane.
All as per item Sl No 116 here in before but for One socket out let 5 Amps 3 pin on independent board.
All as per item No116 here in before but with cable size 2.5 Sq mm for one 3/5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed.
Supply and fixing Modular Switch 1 way 6 A, 1 Module all as specified and directed.
Supply and fixing Modular Switch 1 way 16 A, 1 Module all as specified and directed.
Supply and fixing Modular bell push 6 A, 1 Module all as specified and directed.
Supply and fixing Modular socket 6 A, - 2/3 pin combined 2 module all as specified and directed.
Supply and fixing Modular socket 6/16 A, - 2 / 3 pin comb 2 module all as specified and directed.
Supply and fixing Modular fan regulator 120W, 2 Module for C/F complete all as specified and directed.
Supply and fixing Bell Ding-Dong AC 230 V AC complete all as specified and directed.
Supply and fixing Modular white cover plate with frame 6 Module for light & ceiling fan complete all as specified and directed.
Supply and fixing Modular white cover plate with frame 3 Module complete all as specified and directed.
Supply and fixing Modular white cover plate with frame 4 Module complete all as specified and directed.
Supply and fixing Modular white cover plate with frame 1 Module complete all as specified and directed.
Supply and fixing Modular Metal flush box 6 Module complete all as specified and directed.
Supply and fixing Modular Metal flush box 3 Module complete all as specified and directed.
Supply and fixing Modular Metal flush box 4 Module complete all as specified and directed.
Supply and fixing Modular Metal flush box 1 Module complete all as specified and directed.
Supply and fixing ceiling rose surface Bakelite 3 terminals 65x50mm complete all as specified and directed.
Supply and fixing ceiling fan 1200 mm sweep, 50 Watts, 340 RPM, 230/240 volt AC, Kessels star Product Code 251085 Make : Bajaj, single phase including provision of suitable C/F hooks for fixing ceiling fan and three core copper PVC flexible cable of size 0.5 sq mm including writing CA No and MES No 2 cm height with synthetic enamel paint all as specified and directed.
Supply and fixing Exhaust fan 300 mm sweep, 230/240 volt AC single phase 410W, 1400 RPM, Make Bajaj, Bahar code 70001. including core cutting hole on stone masonry (Machine cutting) suitable for fixing exhaust fan with suitable nuts bolts and louvers and make good the surface to match with existing surface complete.
Supply and Fix Esteem Wall Mounted Fan, 400 mm sweep, 1320 RPM, 230/240 volt AC, Product code 250552 Make : BAJAJ or equivalent complete including connecting and testing as specified and directed..
Supply and fix LED Batten, plastic 10 Watts 2 ft housing made of engineering plastic, designed to deliver glare free light complete with accessories. Including taking down old light fitting.
Supply and fix LED recessed mounted full lit luminaire with glare free uniform illumination with longer life and less maintenance 2'x2' 36 watts LED luminaire with polymer diffuser complete with accessories. Including taking down old light fitting.
Supply and fix LED surface mounted full lit with glare free uniform illumination with longer light and le maintenance 2'x2' 36 watts LED luminaire with polymer diffuser complete with accessories. Including taking down old light fitting.
Supply and fix Round Surface mounted LED fitting/panel, PDC Aluminium housing, translucent frosted plastic diffuser makes it a robust luminaire complete with accessories. Including taking down old light fitting.
Supply and fix LED Batten, Delux 20 Watts 4 ft Robust extruded aluminium housing, elegant dual coloured end caps designed to deliver glare free light complete with accessories. Including taking down old light fitting.
Supply and fixing LED building security/street light fitting 30 watts made up of pressure die cast housing with toughened glass diffuser, with high power LEDs with option of secondary optic with IP66 protection, 110 LM/ watt and wired with accessories including suitable bracket & clamps with bolts & nuts. Including taking down old light fitting
M&L for sub main wiring with 2 single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 4 sqmm drawn through suitable size of non-metallic PVC rigid conduit with 4 sqmm copper conductor cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up wiring complete all as specified & directed.
Supply and fixing VTPN 4 way MCCB distribution box, Double door IP : 43 protection, door earthing, Isolated neutral bar, Mechanical Impact Strength IK 08, Insulated bus bar assembly Suitable for MCCBs up to 63 Amps TPN, connecting up complete all as specified and directed Including taking down old MCB DB's
Supply and fixing MCCB 16kA 63 Amps 4 pole, connecting up complete all as specified and directed
Supply and fixing Single pole & neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps for Split type AC all as specified & directed
Supply and fixing MCB Single pole 240 volts 5 to 32 Amps, 10KA rupturing capacity, C series complete all as specified and directed Including taking down old MCB's
M&L for earthing complete with copper earth plate electrode 60x60cmx3.15mm buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top dege of the plate not less than 1.5 meters below normal ground level, connected to 20X3mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 3 connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab with GI protection pipe but all as specified and directed by Engineer-in-Charge. all as specified or indicated including testing on completion and taking down old earthing material.
M & L for Rigid non metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couples, lock nuts, saddles, pipe hooks etc. of size 40 mm dia running on wall/floor for existing communication cables.
Dismantling and taking down carefully serviceable existing split type Air conditioner and refixing the same after cleaning, servicing, gas charging including provision of minor spares such as copper tube, nuts, bolts etc,complete with testing & commissioning in in new location as directed Engineer in charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core UG cable running on wall / floor/dcukt) including taking down old U/S UG cable
M & L for Rigid non metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couples, lock nuts, saddles, pipe hooks etc. of size 40 mm dia running on wall/floor for running the 35 sqmm cable on wall.
Supply and spread dry river sand in trenches for cable cushioning all as specified on both top and bottom of cable including ramming all as specified and directed Note:- For the purpose of payment the punned thickness only measured.
Supply and lay un-reinforced precast concrete cable cover, class LV, Type-I flat, size 250mm x 150mm x 40 mm for cable protection all as specified and directed.
Supply and fixing GI tubing light grade 40 mm dia for cable protection fixed along with steel tubular pole / RCC pole/ laying in ground including necessary clamp, nut, bolt, washers etc. all as directed at site.
Supply and fixing provision of MCCB 16kA 63 Amps 4 pole , connecting up in existing outdoor panel including fixing arrangement complete all as specified and directed
LAKSHMI CONSTRUCTIONS
shashi shekar construction
VARGHESECHACKO AND CO
Maruthi constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .