REPAIR TO TOILET AND SANITARY FITTINGS AT UMROI MIL STATION UNDER GE UMROI

Amount

Demolition of cement concrete above ground floor and pavings exc 15 cm thickness (below or above ground level) unreinforced, complete all as specified and directed.

Material & Labour for 15 mm thick rendering in cement mortar 1:3 on concrete/block surfaced, finished even and smooth without using extra cement mixed with WPC @ 3% by weight of cement, complete all as specified and directed. ( WPC shall be measured and paid separtely)

Material & Labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface as in sunken, complete all as specified and directed.

Material & Labour for polythene film black, 50 micron laid in floors, complete all as specified and directed.

Material & Labour for cement concrete (1:7:12) Type F2 (using 40mm graded stone aggregate) laid, compacted all as directed and specified

Removing demolished material upto a distance exceeding 250m but not exceeding 500m including loading/unloading and spreading at the destination if required/directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls etc, laid , bedded and pointed in any mortar, complete all as specified and directed.

Supply & fix Coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and directed.

Supply & Fixing of glazed ceramic coloured /printed tiles 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on verticle surface of wall, complete all as specified and as directed.

Material & Labour for 15mm thhick screed bed or bedding layer CM (1:6) for laying floor finishes, complete all as specified and directed.

Material & Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting all as specified and directed by Eng-In-Charge.

Supply and Fix in repair 15mm bore dia, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

Supply & Fix in repair 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

Supply & Fix in repair 15mm bore dia Stop valves, fancy type,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair, complete all as specified and as directed.

Supply & Fix in repair Brass chromium plated shower rose 125mm size fix to iron pipe 15mm, complete all as specified and as directed.

Supply & Fix in repair brass chromium plated tubular towel rail , 20mm dia , 60cm long between flanges, complete all as pecified and as directed.

Supply & Fix in repairs PVC low level flushing cistern, white, 10 ltrs capacity with float valve and brackets complete including fixing low level flush pipe after dismantling of old unserviceable existing flushing cistern complete all as specified and directed.

Fixing only High or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any, complete all as specified and directed.

Supply & Fix in repair Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted /erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed.

Supply & Fixing in repair 15mm bore dia pillar taps, fancy type chromium plated with capstan heads chromium plated screwed down high pressure, with or without lettered 'hotor cold' with long screwed shank and fly nuts screw for iron pipe .

Supply and fix in repair 40 mm Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/Cm2 fixed complete to wall ceiling or in floors, complete all as specified and as directed.

Supply and fix in repair PVC connection 15 MM size with PTMT nuts of length 450 mm, complete all as specified and directed.

Supply and fix in repairs vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed., complete all as specified and as directed.

Supply & Fix in repair 15mm bore dia Brass CP central hole basin mixer wih popup waste system with 450mm long braided hoses fixed iron pipe, complete all as specified and as directed.

Taking up or down steel tubing and conncection 20 mm, incl cleaning for re-fixing or removal to store

Taking up or down steel tubing and conncection 15mm, incl cleaning for re-fixing or removal to store, complete all as specified and as directed.

Supply & Fixing Unplasticised PVC pipes of 15 mm dia pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe and making connection with old GI tube/pipe using suitable section complete leakproof all as specified and as directed.

Supply & Fixing Unplasticised PVC pipes of 20 mm dia pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe and making connection with old GI tube/pipe using suitable section complete leakproof all as specified and as directed.

Cutting existing steel tubing 15mm bore for alterations or additions (Each cut measured) complete all as specified and directed.

Cutting existing steel tubing 20mm bore for alterations or additions (Each cut measured) complete all as specified and directed.

Material & Labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to edges or ends of landings,steps, cills, sunshades, lintels,etc and and cutting chases for concealed water tubing or making good on brick walls cutting not exc. 10 cm in girth complete all as specified and directed.

Supply & Fixing in repairs vitreous china urinal half stall type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing only flushing cistern with brackets including waste pipe etc.

Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Material & Labour for treatment of damp proof top surface of old damp wall surface external/internal by removing the top plastered surface and applying damp proof smart care/pedecrete of approved make like pedelite/Dr. Fixit/Asian and equivalent in 02 coats as in following steps: a) Applying first coat in longitudinal direction and let it be dry for 3-4 hour. b) Applying second coat in transverse direction and let it be dry for 2-3 hour. The mixing of damp proof material shall be done with water, cement/ wall putty/white cement or suitable chemical all as specified and directed by manufacturer instructions.The material shall be approved by GE.

Material & Labour for rendering 15mm thick in cement mortar (1:6) on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed

Material and labour for 5 mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces such as soffits of slabs, in patches n exc 1 sqm each finishing the surfaces fair and even complete all as specified and direccted.

Material & Labour for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and as directed.

Material and labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of new surafaces complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) but area n.exc. 1.5 Sqm each and removing from site all as specified and directed by Eng-in-Charge.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and removing from site.

Supply & fix Factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.

Supply & fix Factory made Solid PVC Double door frame of size 50mm x 95mm single side prelam PVC sheet used instead of Plain colour PVC sheet, reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

Supply & fix 100 mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.

Supply & fix 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

Supply & fix 150mm aluminum anodised bow handles, complete all as specified and directed.

Refxing the shutter of any desc in the same opening exceeding 1 Sq. M but not exceeding 2 Sq. M each all as specified and directed by Eng-in-Charge

Material & Labour 75mm PVC (SWR) floor trap, with grating including jointing with solvent cement, complete all as specified and directed.

Supply & fix of grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.

Supply & fix Aluminium powder coated [Minimum 50 Micron thick] anodised aluminium ventilator with sliding frame and shutter with 40 x 18 x 1.55 mm thick section for shutters of both gauzed and glazed with 4 mm thick tinted glass/louvered glass, stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] in ventilation including necessary jointed, cleats powder coated glazzing clips, powder coated aluminium snap beadings, complete and as directed.

Schedule of Credit

Dayamonki Kyndiah

M/S INSHA ELECTRICALS

M/S UB ENTERPRISE

Lyngdohs Construction Company And Associates