Civil and electrical works for Gym facility in basement Part-A of Har Govind Khorana Building IIT Ropar

For shutter of doors, windows & ventilators including providing and fixing hinges. pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required. (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neorene gasket etc complete as per the architecutral drawings and the directions of Engineer in-charge. (Cost of aluminium snap beading shall be paid in basic items.

With float glass panes of 5.00mm thickness (weight not less that 12.5 kg/sqm)

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 36 kg to 80kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. Complete

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

Providing and fixing aluminum tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Providing and fixing aluminium handing floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws. Complete.

Twin rubber stopper

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge.

Pre-laminated particle board with decorative lamination on both sides

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

Sliding roller for making sliding arrangement of aluminium doors

Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and aplying a priming coat of approved steel primer using structural steel etc. as required.

In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade

Two or more coats on new work over an under cpat pf suitable shade with ordinary paint of approved brand and manufacturer

Providing and laying 50mm thick coloured IPS flooring with metallic concrete hardener topping, laid in panels of size 1m x 1m, including base layer (under layer): 38mm thick cement concrete 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregate of 10mm nominal size) by volume. Top layer: 12mm thick coloured IPS flooring with metallic concrete hardener in the proportion of 1:2 (1 part cement hardener mic : 2 parts graded stone aggregate of 6mm nominal size) by colume. Metallic floor hardening compound of approved make shall be mixed with cement in the ratio of 4:1 (4 parts cement : 1 part metallic hardener) by weight along with addition of approved oxide pigment @ 2% to 4% by weight of cement to achieve the desired shade. The item shall include providing and applying cement slurry, finishing the surface with anti-skid texture, rounding of edges, inserting glass strips, making grooves, curing for a minimum period of 07 days and completing the flooring and skirting in all respects as per CPWD specifications and as directed by the Engineer-in-charge.

Electrical Works

Supplying of XLPE insulated PVC sheathed aluminium conductor armoured cable working voltage 1100 volts grade as per IS 7098

16 sqmm (4 core)

Laying of one no. PVC sheated/XLPE power cable of 1.1kv grade of follwing size on wall surface as required

upto 35 sq. mm

Supplying and making indoor termination wirth brasscompression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 x 16 sq. mm

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductors single core cable in surface / recessed steel conduit , with piano type switch , phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor sinbgle core cable etc. as required.

Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sqmm + 1 X 1.5 sqmm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for light/power plug with 2 x 4 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit along with 1 no. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following way Horizontal type three pole and neutral sheet steel , MCB distribution board , 415 V on surface /recess complete with tinned copper bus bar , earth bar , din bar , interconnectionz , powder painted including earthing etc. as required

6 way (4+18) , Double door

Supplying and fixing 5A to 32A rating ,240/415V , 10KA , C curve , miniature circuit breaker suitable for inductive load of following poles in the exsiting MCB DB complete with connection testing and commissioning etc as required.

Single pole 16 A

DP 63 amp

Supplying and fixing following rating double pole (single phase & neutral) , 415 v residual current circuit breaker RCCB having a senstivity current 30A in the existing MCB DB complete with connection , testing , commissioning etc as required

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

5 / 6 amp switch

6 Pin 15/16 amp socket outlet

15 / 16 amp switch

3 Pin 5/6 amp socket outlet

Supplying and fixing following modular base and cover plate on existing modular metal box etc as required.

6 module

Supplying and fixing folowing sizes/modules,GI box along with modular base and cover plate for modular switches in recess etc

6 module (200 mm x 75 mm)

Supplying and fixing 3 pin ceiling rose on the existing junction box/wooden block including connections etc. as required

Supplying and fixing of 2 way junction boxes

Supply , installation testing and commissioning of of wall mounted fan of sweep 400 mm plastic body , 1300 rpm speed minimum air delivery 75 cmm acrodynamically designed PP blades , superior technology for enhanced air thrust unique pivot arrangement for tiltinh suitable for 230volt , 50 hz AC supply as per approved make

LED Batten light (System lumen efficacy ≥105 85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

Supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recesssed conduit as required.

Please Enable Macros to View BoQ information