Annual Repairs and Maintenance of Staff Quarters at Kodihalli Campus, NAL, Bengaluru

Amount

CLADDING WORK

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

WOOD AND P.V.C. WORK

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Providing and fixing to existing door frames. 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

FLOORING

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

FINISHING

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. One or more coats on old work

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

DISMANTLING & DEMOLISHING

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

MARKET RATE ITEMS

Supplying and Stacking Building materials (Coarse River Sand (Zone III)) conforming to IS Specifiactions at site from approved sources as per the directions of Engineer-in-charge.

Supplying and Stacking Building materials (FPS Bricks of class designation 50) conforming to IS Specifiactions at site from approved sources as per the directions of Engineer-in-charge.

Supplying and Stacking Building materials (Stone aggragate (Single size) 20mm nominal size ) conforming to IS Specifiactions at site from approved sources as per the directions of Engineer-in-charge.

Supplying and Stacking Building materials (Portland Cement of 43 grade ) conforming to IS Specifiactions at site from approved sources as per the directions of Engineer-in-charge.

Supplying at site of Chlorinated Polyvinyl Chloride (CPVC) Pipe of approved quality as per directions of Engineer in charge. 20mm Outer Dia

Supplying at site of Chlorinated Polyvinyl Chloride (CPVC) Pipe of approved quality as per directions of Engineer in charge. 25mm Outer Dia

Supplying at site of Chlorinated Polyvinyl Chloride (CPVC) Pipe of approved quality as per directions of Engineer in charge. 40mm Outer Dia

Supplying at site glass panes of 4.0mm thick for windows as per Directions of Engineer in charge.

Supplying of wash basin 550x400 mm with rack bolts and waste coupling as per direction of Engineer in Charge.

Supplying of 32mm waste coupling as per direction of Engineer in Charge.

Supplying of 32mm Steel Sink waste coupling as per direction of Engineer in Charge.

Supplying of Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm as per direction of Engineer in Charge.

Supplying of Flexible PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm as per direction of Engineer in Charge.

Supplying of Polyethylene water storage tank with cover and suitable locking arrangement as per direction of Engineer in Charge.

Supplying PVC/SWR pipes for sewer lines - Type :A of ISI :13592 160mm Dia as per directions of Engineer In Charge.

Supplying PVC/SWR pipes for sewer lines - Type :B of ISI :13592 110mm Dia as per directions of Engineer In Charge.

Supplying PVC/SWR pipes for sewer lines - Type :B of ISI :13592 75mm Dia as per directions of Engineer In Charge.

Supplying of S.S Spindle Half Round Medium type of approved quality as per directions of Engineer In Charge.

Supplying of Spindle Full Round No. 5 Heavy type of approved quality as per directions of Engineer In Charge.

Supplying of ESS Spindle Half Round Heavy type of approved quality as per directions of Engineer In Charge.

Supplying of Jaquar Bibcock Spindle Full Round Heavy type of approved quality as per directions of Engineer In Charge.

Supplying of Poly Vinyl Chloride (PVC) Tap/Bibcock of approved quality and make as per directions of Engineer In Charge.

Supplying of CP Bibcock of approved quality and make as per directions of Engineer In Charge.

Supplying of White Cement of approved quality and make as per directions of Engineer In Charge.

Supplying of Unplasticised P.V.C. Connection pipe with brass union 60 cm long 15 mm bore of approved quality and make as per directions of Engineer In Charge.

Supplying of CPVC Solvent 118 ml of approved quality and make as per directions of Engineer In Charge.

Supplying of Poly Vinyl Chloride (PVC) Solvent 100ml of approved quality and make as per directions of Engineer In Charge.

Supplying of PVC Nahani Trap 110 x 75mm dia of approved quality and make as per directions of Engineer In Charge.

Supplying of CP Grating Plate 110mm dia of approved quality and make as per directions of Engineer In Charge.

Supplying of CP Health Faucet Set of approved quality and make as per directions of Engineer In Charge.

Supplying of CP Health Faucet Gun of approved quality and make as per directions of Engineer In Charge.

Supplying of Syphon Set of approved quality and make as per directions of Engineer In Charge.

Supplying of white vitreous china water closet squatting pan with P- Trap (Indian type). Orrissa pattern W C Pan of size 580x440mm. As per directions of Engineer in charge.

Supplying of white vitreous china pedestal type water closet (European type) with seat and lid As per directions of Engineer in charge.

Supplying of P.V.C Low level flushing cistern with manually controlled device ( handle lever) confoming to IS : 7231, 10 litre capacity - white. as per directions of Engineer in charge.

Supplying of solid plastic seat with lid for pedestal type WC pan completed.White or black solid plastic seat with lid as per directions of Engineer in charge.

Supplying of Teflon Tape ( packet of 10 Nos Pieces) of Approved quality as per directions of Engineer in charge.

Supplying of SS Mesh ( 50 ft X 4 ft ) of approved quality and make as per directions of Engineer In Charge.

Supplying of Powder Coated Tower Bolts 150mm of approved quality and make as per directions of Engineer In Charge.

Supplying of Powder Coated Tower Bolts 100mm of approved quality and make as per directions of Engineer In Charge.

Supplying of SS Aldrop 250mm of approved quality and make as per directions of Engineer In Charge.

Supplying of Mortice Lock (LAXMI BRAND ) for door of approved quality and make as per directions of Engineer In Charge.

Supplying of Powder Coated Door Stopper of approved quality and make as per directions of Engineer In Charge.

Supplying of Powder Coated Door Hinges 125mm of approved quality and make as per directions of Engineer In Charge.

Supplying of Lappam of approved quality and make as per directions of Engineer In Charge.

Supplying of CP D Shape Door Handles 150mm of approved quality and make as per directions of Engineer In Charge.

Supplying of Iron Window Handles (125mm) of approved quality and make as per directions of Engineer In Charge.

Supplying of FOSROC NITOBOND AR of approved quality and make as per directions of Engineer In Charge.

Supplying of Shalibond App of approved quality and make as per directions of Engineer In Charge.

Supplying of Dr. Fixit Pidiproof LW+, 101 of approved quality and make as per directions of Engineer In Charge.

Engaging Mechanical Excavator (JCB) for earth levelling at Various location as per direction of engineer in charge.

Supplying at site Polythylene water storage tank cover (500 litre, 1000 litre, 2000 litre & 3000 litre)

Supplying and Stacking Building materials (Stone aggragate (Single size) 40mm nominal size ) conforming to IS Specifiactions at site from approved sources as per the directions of Engineer-in-charge.

Supplying of 1 HP monoblock Water pump of approved make and quality as directed by the engineer in charge.

Supplying Eterna 1800 BW (kirloskar make , 2.5HP, 2880 rpm Drainer and waste disposer submersible electrical water pumping set including providing pipe adapter set,3'' pvc pipe along with necessary specials.

Monthly Maintenance Charges for water supply and distribution management of Staff Quarters like operation and maintenance of Pump houses, periodical cleaning of over head tanks & under ground water tanks, repairs and maintenance of water supply lines, recording water meter readings and coordination with BWSSB authorities for better water supply and distribution as per the direction of Engineer in charge and scope of work mentioned in Annexure - I

Monthly Maintenance Charges for Mainenance of Staff Qtrs. Of plinth area 25,000 sqm towards civil, water supply, sanitary & plumbing related works, at kodihalli campus NAL, Bangalore as per the direction of Engineer in charge and scope of work mentioned in Annexure - I

V SIVA KUMAR

S P Constructions