Tender ID

Karnataka

AOC

Works

Buildings

Repair Works of Class Rooms at Navunda College in Navunda Grama Panchayath of Byndoor Taluk.

Rural Development and Panchayat Raj Department

RDPR Division Office Udupi | Udupi, Karnataka

Amount: ₹8.9 LCloses: 5 Dec 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published26 Nov 2025
Closed5 Dec 2025
Awarded—

Bids

1 Bid5 Dec 2025

#	Company	Amount	Status
1	LOKESHA N ₹6.2 Laccepted-aoc	₹6.2 L	accepted-aoc

Tender Value

₹8.9 L

EMD Value

₹18,955

Closing Date

5 Dec 2025, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

Gnanamurthy N K

Office Number

Work Description

Repair Works of Class Rooms at Navunda College in Navunda Grama Panchayath of Byndoor Taluk.

Tender Information

Tender ID

RDPR/2025-26/BD/WORK_INDENT20803

Reference Number

RDPR/2025-26/BD/WORK_INDENT20803

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Udupi

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredRegistration Certificate issued by PWD

RequiredFinancial Turnover Certificate-LATEST 5years along with Profit & Loss account

RequiredWork completed certificate for latest 5 years issued by not below the rank of Executive Engineer. With Work Indent Number.

RequiredSimilar nature of work done certificate issued by not below the rank of Executive Engineer. With Work Indent Number. 50 percent of the contract value

RequiredGST Rigistration Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Tenders from Joint ventures are not acceptable.

Conditional Tenders will not be accepted.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee (Min Rs.500/- and Max Rs.7500/-) and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. The tender processing fee is not refundable.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Division, UDUPI, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

The work should be executed as per the KTPP Act.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹18,955

Important Dates

Last Activity

5 Dec 2025

Published

26 Nov 2025

Download Ends

28 Nov 2025

BOQ Preview

•

Repair Works of Class Rooms at Navunda College in Navunda Grama Panchayath of Byndoor Taluk

•

Providing and fixing in position fully panelled Mathi/Nandi wood shuttersfor doors with stiles and rails of 40mm. thick with bottom and lock rails180mm wide top rail and stiles 100mm wide as per drawi...

•

Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied @ 0.90L/10 m² over an under coat of primer [email protected] L/10 m² of approved brand and manufacture to give an eve...

•

Providing & fixing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I...

•

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear floatglass both side, having 12 mm air gap, including providin...

•

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per directionof Engineer-in-charge For thickness of tiles above 25 mm a...

•

Demolishing cement concrete manually/ by mechanical means includingdisposal of material to the appropriate disposal area as per direction ofEngineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in differentsizes with water absorption less than 0.08 % and conforming to I.S. 15622,of approved make, in all colours & shade, over 12 mm t...

•

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mmC.P. brass pillar tapseach

•

Providing and fixing 18 mm thick gang saw cut granite of any color andshade, mirror polished, premoulded and prepolished, machine cut forkitchen platforms, vanity counters, window sills, facias and si...

•

Making the opening in brick masonry for door/window/clerestorywindow including dismantling in floor or walls by cutting masonry andmaking good the damages to walls, flooring and jambs complete, to mat...

•

Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to opening...

•

Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two coat applied @ 0.90L/10 m² over an under coat of primerapplied @ 0.80 L/10 m² of approved brand and manufacture includin...

•

Providing & fixing fly proof wire gauze to windows, clerestorywindows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mmapert...

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)suitable for bore well confirming to IS 8034-2000 specifications, to worksite with testing of as per instructions of engineer incharg...

•

Labour charges for Erection, Electrification and commissioning of Pumpsets, including aligning and balancing of all items including supply anderection of two pair of supporting clamps, bore well caps,...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes ...

•

Providing and placing on terrace (at all floor levels) polyethylenewater storage tank, IS : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and ov...

•

Providing and fixing Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved...

•

Providing and constructing load bearing wall with Solid Concrete blocksof size 400x150x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185...

•

Providing, fabricating and fixing of 6 mm thick High Pressure Laminatesheets in standard size of 1200 mm x 2400 mm (Sheets can be supplied incustomized length depending on requirement). Sheets shall b...

•

Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the directio...

•

Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0mcasted in M 20 with 20mm down size aggregates making holes for drawingbarbed wire at 30 cm c/c using 8 mm dia vertical 4 TMT steel...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-1.doc

Tender Document • 0.43 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

LOKESHA N

₹6.2 Laccepted-aoc