REPAIRS TO FLOORS, WALL JOINERY, ROOF SHEET, CEILING, PLUMBING ITEMS AND CERTAIN MISC B/R WORKS AT SECT A AND OTM ACCN OF ZONE-III AREA UNDER AGE B/R-II UNDER GE DINJAN

Amount

Taking down steel window/ventilator frames with shutters (without taking off shutter from frame) of any size complete all as specified and as directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devotailed or welded complete all as specified and as directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for aluminum anodized glazed ventilators with frame of standard section and grill including provision of glazing with 3 mm thick glass fixed to frame, rubber beading, handles and tower bolts etc as in repairs including removing of old windows complete all as specified and as directed.

S&F for aluminium anodised frame for doors, windows etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F aluminium anodised (Deco) pattern grill 75x75mm size design No. 102, 7.30mm thick including suitable F/H section frame fixed with aluminium plate screw to window complete all as specified and as direcetd.

S&F for mild steel window guard bars, plain, let in and fixed independently in wooden frames, L or T section, supports for shelves etc., and similar articles confirming to Fe 290, Gde E-165 including drilling holes complete all as specified and as directed.

S&F in repairs for stainless steel wire cloth 0.36mm, nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stamples complete all as specified and as directed.

S&F in repair galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of operturel 1.18 mm complete fixed stables all as specifed and as directed.

S&F for galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

S&F for mild steel angle iron frame any section/size as framed work for door frame/chowkats moulding, welding butt hinges, slot for towerbolt, sliding bolt etc complete all as specified and as directed.

S&F for door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guisides) and hanging also fastening and fixing complete all as specified and as directed.

S&F for 1.0mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks, water troughs, ducts,urinal trough and funnels etc, cut to size, edge beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc as required.

S&F for 35mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and if one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0Sqm and n.exc 2 Sqm each complete all as specified and directed.

Taking down chowkats or frames not exc 1.5Sqm each with shutter (with out taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm n.exc 4 Sqm each with shutter (with out taking off shutters from the frame) complete all as specified and directed.

M&L for 35mm thick II nd class hard wood made at site plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed.

M&L for 35mm thick II nd class hard wood made at site glazed and skeleton shutters, open rebated and prepared to receive glass, guaze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a); supplied and fitted to chowkhats complete all as specified and as directed.

Refixing of shutters of any description n exc 1 Sqm each complete all as specified and as directed.

Refixing of shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed.

S&F for pressed steel door frame 125x60mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates complete as specified and as directed Note : PCC filling of holloow section measured and paid seprately.

M&L for PCC type C-1, 1:3:6 (20mm graded stone aggregate) for cills, hold fast filling of hollow of pressed steel door frame etc. complete all as specified and as directed.

Dismantling framed timber work in fillets, rails, posts, rafters, purlins etc under 40Sqcm in section complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails (for cupboard shelve) complete all as specified and as directed.

M&L for 18/19 mm thick pre laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed.

M&L for 2nd class hard wood, plain fillets, Square, rectangular or triangular in section, chamfered, rounded, secured with nails or brads exceeding 3Sqcm and not exceeding 6Sqcm complete all as specified and as directed.

S&F in repairs hasp staple 100mm long safety with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

M&L for 150mm long aluminium barrel tower bolts, of extruded section and fixed complete all as specified and as directed.

M&L for 200mm long aluminium barrel tower bolts, of extruded section and fixed complete all as specified and as directed.

S&F for 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F for butt hinges 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and as directed.

S&F for 125 mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S&F for 75mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

M&L for 150mm long aluminium pressed handles, cast type anodised complete all as specified and as directed.

S&F for aluminium anodised sliding door bolts of size 300mm long, with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy complete all as specified and as directed.

S&F mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 20mm dia curtain rod CP with fixing brackets, stops rollers etc complete all as specified and as directed.

S&F in repairs 20mm dia curtain rod aluminium alloy with fixing brackets, stops rollers etc complete all as specified and as directed.

Cutting down plants/shrubs of girth n,exc 15cm from roof tops/sides of external walls of bldg, chajjas, wall junction etc incl taking out penetrated roots in to the wall, slab surfaces and applying "CHEMICAL" solution (herbal medicine) as per manufacturer's instructions in and around the surfaces and making good the location with PCC (1:2:4) and cement mortar (1:2) including necessary scaffolding 3.5m to 10m height from ground level complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid tiles 7 to 8mm thick area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm 7mm thick coloured tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over screed bedding 15mm thick in cement mortar (1:6) complete all as specified and as directed.

S&F for glazed ceramic coloured tiles of 300x200x7mm thick tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, over backing coat of in cement mortar (1:4) 10mm thick complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm (400x400x7mm) in floor, over 20mm thick screed bed or bedding in cement mortar (1:6) on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed.

M&L for non skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm (400x400x7mm) as in skirting, over 10mm thick backing coat in cement mortar (1:4) on wall set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete as specified and as directed.

S&F for 3mm thick sheet glass, ordinary quality and glazing with wooden beads/oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and as directed.

Hacking and old broken glass (any thickness, Size quality or description) from wooden frames or stone or concrete or brick work surrounds including S&F 3mm thick sheet glass ordinary quality fixed with putty or fixed with wooden beads in squares not exceeding 0.5Sqm each pane complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on newly wooden surface over one coat of pink primer of any description, not otherwise described, over 10cm width or grith including preparation of surface complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) for fixing of hold fast including necessary form work complete all as specified and as directed.

M&L for mild steel flat iron holdfast fixed to door chowkat complete all as specifed and as directed.

M&L for applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome on newly steel surface including preparation of new previously untreated surfaces of any description, over 10cm width or grith complete all as specified and as directed.

Taking down cement or lime plaster on brick or stone masonary surfaces of walls etc including racking out joint hacking for keys scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick plaster in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L for rendering 10mm thick on other then fair faces of brick or concrete surfaces of wall in cement mortar (1:4) complete all as specified and as directed.

M&L for 5mm thick rendering on concrete surface of ceiling in cement mortar (1:3) and finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for three coats of white wash on newly plastered ceiling surfaces including preparation of surfaces complete all as specified and as directed.

M&L for preparation of plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

M&L for 30mm thick made at site glazed and gauzed windows shutters open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers etc are provided with stile and rails as specified in SSR Part-I, Section 8 clause 8.20 (b) complete all as specified and as directed.

M&L for 100mm long aluminium barrel tower bolts, of extruded section and fixed complete all as specified and as directed.

S&F for 75mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

M&L for 100mm long aluminium pressed handles, cast type anodised complete all as specified and as directed.

Dismantling timber scantling 40 sq cm & over in section, any position in unframed work complete all as specified and as directed.

M&L for timber framed and fixed second class hard wood in scantling for rafter/purlin, wooden trusses complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc complete all as specified and as directed.

M&L for brickwork withsub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in built in cement mortar (1:6) complete all as specified and as directed.

M&L for brickwork withsub class 'B' bricks, straight or curved on plan to any radius in half brick walls built in cement mortar (1:4) complete all as specified and as directed.

S&F for solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with mild steel square tube all as per specification and drg in SSR Pt II 2004 complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC Channel having a PVC sheet strip of 20mm width stuck inside with solvent cementfor styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drgs in SSR Pt II 2004.

S&F in repairs, 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic bal screwed for iron pipe and fixed (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed.

S&F for stainless steel kitchen plate rack 1 mm thick of size 31''x30''x10'' complete all as specified and as directed. Make : Prayag/Polytuf/Polymer Pvt Ltd.

Dismantling water tanks and removing to store capacity exc 250 but n exc 500 ltr complete all as specified and as directed.

S&F for rotational moulded polyethylene water storage tank capacity 500 litres consisting of three layer cylindrical vertical with top closed hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

Dismantling water tanks capacity exceeding 500 litres and not exceeding 1000 litres and removing to store complete all as specified and as directed.

S&F for rotational moulded poly ethylene water storage tanks 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

S&F in repairs 15mm bore Bip taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15mm bore, bib tap, PTMT (PVC) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement and including fixing of PCC 1:2:4 complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F for 75mm bore PVC (SWR) bends complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 15mm bore of pipe complete all as specified and directed.

Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

S&F for steel tubing 15mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20mm bore of pipe complete all as specified and as directed.

Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

S&F for steel tubing 20 mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and as directed.

S&F in repairs, stop valves, 15 mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket and flush pipe complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs, swivel shower rose of PTMT, 15mm bore (minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum wt 40 gms) complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC. type D-2, 1:4:8 ( using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver block any shape and any size confirming to IS 15658-2006 of 60mm thickness, M -35grade with grey cement and no pigment with 75mm thick sand cusion layer complete all as specified and as directed.

M&L for water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below :- (a) Taking down/scrapping out existing old tarfelt bituminous compound including, sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n.exc. 250m. (b) 15mm thick plastering in cement mortar (1:4) finished even and smooth. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per Sqm confirming to IS-3384. (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrance shall be torch application. The over lap shall be minimum 100mm on transverse direction and 75mm longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm.

M&L for 40 mm thick, plain cement concrete 1:2:4, type B-1 (using 12.50 mm graded stone aggregate) as in floors and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

S&F for glass dividing 3 mm thick 38mm wide and inserted in position to conforming to design complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc. finishing cement concrete surface even and smooth with out using extra cement including making joints with bitumastic filling in proportion of bitumen and sand (1:2) complete all as specified and as directed.

M&L for chequered cement concrete tiles 25 cm X 25cm X 20mm thick set and jointed and pointed with grey cement and pig ments in neat cement slurry in floors including 15mm thick secreed bed or bedding in cement mortar (1:4) set and jointed and pointed in neat cement slurry complete all as specified and as directed.

Dismantling asbestos cement (Corrugated, Semi corrugated etc) sheets in roof coverings including ridge complete all as specified and as directed.

M&L for 6mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls, etc. and fixed with L type or J-type or cranked hook bolts complete all as specified and as directed.

M&L for asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheet, fixed with L type or J type hook or cranked hook bolt with washer complete all as specified and as directed.

S&F for prepainted galvatume aluminum zinc coating galvanised iron based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for prepainted galvalume aluminum zinc coating galvanised iron based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed.

S&F for aluminium anodised snap grid frame work of size 600mmx600mm frame work for ceiling with aluminium tee section of size 23.5mmx26.4mmx1.4mm thick and aluminium angle section of size 36.5mmx25mmx1.4mm thick for false ceiling including Hangers 6 mm dia galvanised iron (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of galvanised iron flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestor E-board, HSPC fixed to frame including two coats of white wash complete all as specified and as directed.

M/s GANDHESWAR PHUKAN

M/S A K BROTHERS

AFTAB ENTERPRISES

FREEZCON

R.D.CONSTRUCTION

MAZUMDAR ENTERPRISE