Repair/ Maint of view cutter Fencing, Barbed Wire/ Concertina Coil Fencing, Strengthening of wall, MS Grating/ MS Plates at open drain near dispersal area and Hangers, Repair to External Services like Drains, Sewage Lines, Compound Wall, Hard Standin

Amount

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water,complete all as specified.

Material & labour for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair, complete all as specified.

Material & labour for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer on wall complete all as specified and directed.

Material & labour stone walling of squared rubble brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:4 all as specified.

Material & labour stone walling of squared rubble brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:4 but except stone all as specified.

Material & labour for raking out random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified & directed.

Material & labour for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:3 , complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Supply & fixing as in repairs plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attahment, confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified.

Material & labour for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

Material & labour for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Dismantling of wall panelling of any size and thickness etc including aluminium grid frame work and removing to store complete all as specified and as directed.

Supply & fixing PVC wall panelling consisting of 5mm thick wood grain printed PVC sheet and fixed over GI running channels 50mm wide and 0.6mm thickness at every 1m interval , fixing over brickwall /concrete walls with screws and all corners, top and bottom portion of PVC lining covered with L/T shaped PVC sheet of same colour/texture including all necessary cuttings near switch boards and other fixtures if fitted over wall and including complete all as specified.

Material & labour for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm thick as on vertical surfaces such as skirting/dado including 15mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or colour including dismantling floor, hearth or wall tiling or any type of tiles including cement mortar bedding / backing and disposing the rubbish to the out side of MD land

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

Material & labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, complete all as specified.

Material & labour for cement concrete interlocking paver blocks 60 mm thick having glossy finish (colour and pattern approved by GE) (tested as per IS 1237-1980) laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator & removing of old broken tiles, complete all as manifacture instructions specified and directed.

Dismantling of old interlocking tiles carefully and Refixing in same location interlocking paver tiles any thickness and Material & labour for 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compation, complete all as specified and directed.

Material & labour for cleaning of PCC paver block, chequred tiles and any type of PCC flooring by water sprey and apply one coat of acrylic emulsion paint suitable for floor by using brush, complete all as specified.

Material & labour for glazed Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement & pigments, set, jointed and pointed in neat cement slurry in floors over screed bed or bedding layer of mortar in CM (1:4) 15mm thick for laying tiles and including dismantling of old tiles, complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes upto 100 mm (internal dia of pipe) jointed in cement mortar and taking out of trenches if required or on walls , complete all as specified.

Supply & fixing sand cast type 100 mm bore cast iron soil , waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with MS clamps, complete all as specified.

Supply & fixing sand cast type 75 mm bore cast iron soil , waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with MS clamps, complete all as specified.

Supply & fixing in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) , complete all as specified.

Supply & fixing in repairs 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) & ht. upto 7th floor of bldg., complete all as specified.

Supply & fixing 75mm bore of pipe Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 7th floor of bldg., complete all as specified.

Supply & fixing 100mm bore of pipe Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 7th floor of bldg., complete all as specified.

Taking down eaves gutters and rainwater pipes of any dia (any size or pattern ) including all fittings, heads, shoes, bends, swan necks etc (Measured overall as fixed along the centre line over fittings and accessories) & ht. upto 7th floor of bldg., complete all as specified.

Supply & fixing 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 7th floor of bldg., complete all as specified.

Refixing of 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 7th floor of bldg., complete all as specified.

Supply & fixing PVC (SWR) bends of 160 mm bore & ht. upto 7th floor of bldg., complete all as specified.

Supply & fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 7th floor of bldg., complete all as specified.

Supply & fixing PVC (SWR) bends of 110 mm bore & ht. upto 7th floor of bldg., complete all as specified.

Refixing of 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 7th floor of bldg., complete all as specified.

Supply & fixing in repairs Cast iron work grade FG 150, machined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles machined each exceeding 5 Kg by weight complete all as specified and directed.

Preparation of old plastered surfaces of wall and apply one coat of Acrylic emulsion exterior paint of required shade, complete all as specified.

Preparation of old plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint of required shade, complete all as specified.

Cleaning the chocks/blockades in AC/CI/PVC soil waste/rain water pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia upto ground/stilt plus seven floors and including necessary scaffolding if required.

Cleaning eye (oval access door) for bends , branches, etc of dia not exceeding 100mm at any floor level and refix the access door in same position after cleaning.

Cleaning and removal of foreign material from inside the Gully trap/WC Pan, Nahani trap, Floor trap etc including removing & re-covering of RCC/CI cover and directly buried in the ground to a distance not exc. 50 m along with spreading of bleaching powder complete one or more times all as specified and directed.

Material & labour for Jointing only cast iron pipes and fittings AC pipes in repair with cement joints for pipes 100mm dia upto ground/stilt plus 7th floors, complete all as specified.

Material & labour for Jointing only cast iron pipes and fittings AC pipes in repair with cement joints for pipes 75mm dia upto ground/stilt plus 7th floors, complete all as specified.

Supply & fixing for 200mm bore RCC pipe class NP-2 laid and jointed complete with collers as specified including testing and excavation for replacement of old pipe of any description and removing out of premises as per BMC guidelines all as specified and directed.

Plain cement concrete 1:4:8 type-D2, using 40mm graded stone aggregate as in foundation filling and mass concrete pipe complete as specified

Material & labour for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradle after they are laid and tested for 200mm bore RCC pipe complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Cutting into existing manholes for connecting new drains of internal dia 200mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, complete all as specified.

Material & labour for cleaning the existing drainage/culvert including removing cover slab carefully without damaging and clean soils,spoils,vegetation,silt etc and relaying cover slabs and removing waste materials outside MD Land complete all as directed.

Supply & fixing 500 lit capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed position all specified in SSR Part-I, with and including 20mm dia. Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, screwed for iron pipes and fixed; including disconnecting and dismantling/ taking down of existing old unserviceable water storage tank from terrace, complete all as specified and directed.

Supply & fixing 2000 lit capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top, black, double layered) hoisted and fixed position all specified in SSR Part-I, with and including Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, screwed for iron pipes and fixed; including disconnecting and dismantling/ taking down of existing old unserviceable water storage tank above 7th floor terrace, complete all as specified and directed.

Supply & fixing in repairs vitreous china wash down water closet pan white including plastic sheet cover with nuts and bolts etc all as specified and directed. (Make -Cera/Jaquar/ Hindware / Parryware)

Supply & fixing in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).

Supply & fixing vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and pillar tap 15mm bore dia fancy type complete as fixed in repair.

Supply & fixing 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified.

Supply & fixing in repairs 15mm size Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed , complete all as specified and directed.

Supply & fixing in repairs fancy type Pillar taps 15mm size cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

Supply and fixing in repairs angular stop valve cast copper alloy ,screwed down ,high pressure or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore complete all as specified and directed.

Supply & fixing health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook (Make - Cera/Jaquar).

Supply & fixing in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.all as directed.

Supply & fixing as in repairs flush pipe of PVC 32 mm dia for low level cistern and connected to WC, complete all as specified.

Supply & fixing in repairs SS grating 100 mm dia , and white cement to sides , complete all as specified.

Supply & fixing in repairs PVC connections 15 mm size with PTMT nuts of length 600mm

Supply & fixing in repairs 32/38 mm dia WHB/urinal /Sink flexible waste pipe all as specified and directed.

Supply & fixing in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges, complete all as specified.

Material & labour for 150 mm thick cement concrete type 1:3:6 ( 40mm graded aggregate) as in sub base including laying and levelling as directed.

Material and labour for cement concrete of thickness 200 mm, of flexural strength 40 Kg/ Sqcm in field as per design mix (with maximum size of coarse aggregates upto 40mm), using minimum 400 Kg/cum and not exceeding 400 Kg/cum of cement including triangular/non circular synthetic polyster fibre reinforcement @ 0.25% by weight of cement including form work for butt nosing, rounding off edges , curing , spread and compacted complete all as specified and directed. Note: (i) The cost of admixture required as per design mix shall deemed to be included in the quoted rate (the constant shall be applied based on design mix). (ii) Polyster triangular/non circular synthetic fibres as secondary reinforcement mixed in concrete shall be measured and paid for separtely under respective item of this schedule. However, mixing shall be deemed to be included in the quoted rate (the constant shall be applied based on design mix). (iii) Construction joints, dummy (contraction joints) and expansion joints shall be measured and paid separately under respective items.

Supply only polyster triangular fibres /non circular fibres (Recron triangular fibre type CT 2012 12mm) having tensile strength 4000-6000 Kg/cm2, designed for melting point more than 250 degree celsius @ 0.25% by weight of cement in controlled pavement quality cement concrete and having specific gravity of 1.34 to 1.40 complete all as specified and directed.

Material and labour for high density polythene film (transparent colour) in single layer of 400 micron thickness of virgin quality (as per ASTM D 2103, IS-2508) laid with side and end overlapping not less than 150 mm complete all as specified and directed.

Material and labour for 7.5cm thick (compacted thickness) water bound macadam (WBM) ( granite, trap or basalt) with coarse aggregate of grading 2 (63 to 40mm size) or of grading 3 ( 50 to 20mm size) spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

Material & labour for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, complete all as specified.

Material & labour for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, complete all as specified.

SHRI SAI ENTERPRISES (BID ID -3117186)

Bob Enterprises (BID ID -3129261)

SHREE JAGDISH FURNITURE CO. (BID ID -3113828)

Nilesh Construction (BID ID -3129251)