REPAIR/MAINT AND PREVENTIVE REPAIRS OF LT OH LINES POLE PAINTING, LT PANEL, UG CABLES AND CONNECTED WORKS AT BABINA CANTT

Amount

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for pole /laying of cable / foundation etc including getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches in any type of soil not exc 1.5 mtrs wide and exc 1.5 mtr in depth for laying of pipe/ cables/ poles/foundation etc and getting out complete all as specified and as directed.

Returning, filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick after cable are laid and tested complete all as specified and directed.

Removing excavated material / surplus soil to a distance not exc. 50 mtrs & deposited where directed at a level not exc.1.5 mtr above the ground level complete all as specified & directed.

M&L for fine and clean dry sand (river sand) free from sharp materials laid in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The thickness of sand shall be measured 18 cm after punning.

M&L for PCC cable cover class LV type 1 flat size 250 mm x 150 mm x 40 mm, ISI marked across the cable for protection of cable after sand cushioning complete all as specified & directed. Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S NAVYA TILES, 68, NEHRU PARK, SARDARPUR,JODHPUR- 342003 Ph. 0291-2650094, 2627963(C) SAP PAVERS JODHPUR (D) SAGAR TILES SAHARANPUR (E) Star Tiles & Industries, Rama Devi, Kanpur

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete for poles all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete including form work for poles all as specified and directed .

Demolition of PCC of any type from coping of PCC/steel poles and including necessary removal at a distance not exc 50 mtr and deposited where directed etc complete.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping including necessary form work to shape as directed for poles all as specified and directed .

Supply,laying and testing in repair/replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with stranded aluminium conductor of size 400 sqmm single core as per IS 7092 Pt-I complete all as specified and as directed. Make :- M/s KEI INDUSTRIES/HAVELLS INDIA LTD/PLAZA CABLES/POLYCAB/CCI/RPG CABLE/ASIAN CABLE/INCAB/FINOLEX /KONARK(M/S POWER CABLE IND)

M&L in repair/replacement composite type LT separators/spacers , made with poly propelene single mould capable for 3 phase 415 volt on LT ACSR overhead distribution system of grey/white colour including fly nuts made with Engineering grade nylon, studs shall be properly fixed, spacers having minimum width 25 mm & thickness 12 mm, voltage flactuation 12% permissible under IES rules. Note:- The contractor has also provide a written guarenee for replacement of minimum 2 years over the products.

Supply,laying and testing of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with stranded aluminium conductor of size 70 sqmm 3.5 core as per IS 7092 Pt-I complete all as specified and as directed. Make :- M/s KEI INDUSTRIES/HAVELLS INDIA LTD/PLAZA CABLES/POLYCAB/CCI/RPG CABLE/ASIAN CABLE/INCAB/FINOLEX /KONARK(M/S POWER CABLE IND)

All as per item No 13 here in above but of size 50 sqmm 3.5 core and -ditto-

All as per item No 13 here in above but of size 35 sqmm 3.5 core and -ditto-

All as per item No 13 here in above but of size 25 sqmm 4 core and -ditto-

All as per item No 13 here in above but of size 16 sqmm 4 core and -ditto-

All as per item No 13 here in above but of size 10 sqmm 4 core and -ditto-

All as per item No 13 here in above but of size 10 sqmm 2 core and -ditto-

S&F 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connections suspended by insulating handger not more than 1 mtr apart incl 4 mm GI wire, one twin core cable flat or circular of size 10 sqmm complete all as specified as dircted.Make :- Havells, Plaza cables or equivalent. Make :-HAVELLS INDIA LTD/PLAZA CABLES/POLYCAB/FINOLEX

M&L for steel tubing galvanised, light grade complete with fittings laid in trenches/ fixed along with poles etc as protection to cables of size 50 mm dia bore complete all as specified and as directed. Make :- Tata /Jindal/Prakash/Surya

M&L for steel tubing galvanised, light grade complete with fittings laid in trenches/ fixed along with poles etc as protection to cables of size 40 mm dia bore complete all as specified and as directed. Make :- Tata /Jindal/Prakash/Surya

Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP-31) 9.0 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint incl taking down complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. Make : (a) PS Steel Tubes Pvt Ltd (b) India Electrical Poles.(c) Surjit Steel Industries Mohali Punjab (d) National tubing Co. Kanpur(e) Fabrico Delhi road Meerut ( f) Quality steel Products Kanpur (g) Advance steel tubes Ltd Ghaziabad (h) RAMA steel tubes Ghaziabad

Supply, erecting and fixing in true vertical position, prestressed concrete pole 9.0 mtr long 102 mm x 172 mm at top and 152 mmx 279 mm at bottom class 10 (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size and directed ) including taking down of existing Pole of any type/description complete all as directed. Note :- Excavation incl earth work and PCC in foundation will be measured and paid separately. Make : (i) M/s Concrete Ugyog Jhansi (ii) M/s INDIA PCC Poles (iii) M/S HINDUSTAN PRESTRESSED CONCRETE Faridabad

M&L for painting of steel tubuler of 11 mtr height any type complete incl flat iron clamps, D clamps, Stay clamps, earth wire clamps, bracing, cross arm with two coat aluminium paint including prepration old painted surface marking with alternate white and red strips 30 cm height 5 Nos strips with two coat of synthetic enamel paint andalso including numbering of poles with white paint are located on different locations in HT over head lines complete all as specified and directed. Make 4/23/2020 ICI Paint (Dulux Gloss) , Asian paint (Apcolite), Shalimar Paints (Superlac Hi Gloss), Goodlass Nerolac paints (Nerolac), Jenson & Nicholson paints Ltd (Brolac), Berger paints (Luxol Hi Gloss), Nerolac (Nerolac Full gloss)

M&L for painting of steel tubuler LT poles any type complete incl flat iron clamps, D clamps, stay clamps, earth wire clamps, bracing, cross arm with two coat aluminium paint incl prepration old painted surface marking with alternator white and black strips 30 cm height 5 Nos strips with two coat of synthetic enamel paint, numbering of poles with white colour are located on different locations in LT over head lines complete all as specified and directed Make : ICI Paint (Dulux Gloss) , Asian paint (Apcolite), Shalimar Paints (Superlac Hi Gloss), Goodlass Nerolac paints (Nerolac), Jenson & Nicholson paints Ltd (Brolac), Berger paints (Luxol Hi Gloss), Nerolac (Nerolac Full gloss)

M & L for painting of steel cross arm, bracing supports of 11 mtr PCC poles any type incl flat iron clamps, D clamps, stay clamps, earth wire clamps, bracing, cross arm with two coat aluminium paint incl prepration old painted surface marking with alternator white and red strips 30 cm height 5 Nos strips with two coat of synthetic enamel paint, numbering of poles on HT overhead line complete all as specified and directed. Make : ICI Paint (Dulux Gloss) , Asian paint (Apcolite), Shalimar Paints (Superlac Hi Gloss), Goodlass Nerolac paints (Nerolac), Jenson & Nicholson paints Ltd (Brolac), Berger paints (Luxol Hi Gloss), Nerolac (Nerolac Full gloss)

M&L for painting of steel cross arm, bracing supports of LT PCC poles any type incl flat iron clamps, D clamps, stay clamps, earth wire clamps, bracing, cross arm with two coat aluminium paint incl prepration old painted surface marking with alternator white and blackstrips 30 cm height 5 Nos strips with two coat of synthetic enamel black paint, numbering of poles on HT overhead line complete all as specified and directed. Make : ICI Paint (Dulux Gloss) , Asian paint (Apcolite), Shalimar Paints (Superlac Hi Gloss), Goodlass Nerolac paints (Nerolac), Jenson & Nicholson paints Ltd (Brolac), Berger paints (Luxol Hi Gloss), Nerolac (Nerolac Full gloss)

M & L for prunning/cutting of tree branches upto 3 M away from the over head line any type & any length of span including removing outside the MoD land complete all as directed . Note for item No 25 to 29:- Painting and prunning of tree work will be carried out after taking electric shutdown properly of the respective area. All safety equipts shall be provided by the contractor for the above works. Contractor will be held responsibe for any lapse if happens on this account.

M & L for cutting and removing unwanted grass and wild grouth incl bushes and shrubs from the root below ground level at various electrical installation/surrounding from LT panel/ transformers incl removing boulders from a depth not more than 25cm below normal ground level and levelling /pruning the entire cleaned area to even finish complete all as specified and directed

S & F in replacement of MCCB, 04 Pole, capacity 63 Amps with ultimate breaking capacity 16 KA at 415 volts with fixed thermalsettings conforming to IEC 60947 Part-I/IS-13947 Part-I , (Ics=Icu=100%) in the existing panel with suitable connecting copper terminals at site complete all specified and directed. Make :- LEGRAND/ABB/SIEMENS/ABB/GE /L&T/Havells/HPL/Indo Asian

Description all as per item No 31 here in above but of capacity 100 Amps with ultimate breaking capacity 16 KA Make :- LEGRAND/ABB/SIEMENS/ABB/GE /L&T/Havells/HPL/Indo Asian

Description all as per item No 31 here in above but of capacity 160 Amps with ultimate breaking capacity 25 KA Make :- LEGRAND/ABB/SIEMENS/ABB/GE /L&T/Havells/HPL/Indo Asian

Description all as per item No 31 here in above but of capacity 200 Amps with ultimate breaking capacity 25 KA Make :- LEGRAND/ABB/SIEMENS/ABB/GE /L&T/Havells/HPL/Indo Asian

Description all as per item No 31 here in above but of capacity 250 Amps with ultimate breaking capacity 25 KA Make :- LEGRAND/ABB/SIEMENS/ABB/GE /L&T/Havells/HPL/Indo Asian

Description all as per item No 31 here in above but of capacity 320 Amps with ultimate breaking capacity 25 KA Make :- LEGRAND/ABB/SIEMENS/ABB/GE /L&T/Havells/HPL/Indo Asian

Description all as per item No 31 here in above but of capacity 400 Amps with ultimate breaking capacity 35 KA Make :- LEGRAND/ABB/SIEMENS/ABB/GE /L&T/Havells/HPL/Indo Asian

Description all as per item No 31 here in above but of capacity 630 Amps with ultimate breaking capacity 35 KA Make :- LEGRAND/ABB/SIEMENS/ABB/GE /L&T/Havells/HPL/Indo Asian

M&L for cutting of road up to 0.9 m deep suitable for laying underground cables/MS tubes of any size/dia & making good the disturbed area to match with the existing level with cement concrete including removing the surplus soil to a distance upto 50 mtr complete all as specified and directed.

M&L for taking up/down and refixing of existing old steel tubular LT poles any type by demolition of old PCC of any type from different locations without any damage of the poes/properties including demolition of cross arms, staywire, clamps of any type, ACSR conductor/cables of any type,insulators any type, GI brackets of any type, security lights of any type all as specified and directed . The rate includes the necessary excavation/breaking of any type PCC required for taking down/up & demolition of poles also shifting of the poles to a new location within the jurisdiction of GE Babina as directed.

Fixing only in true vertical position, old steel tubular swaged pole 8.5/9.0 mtr long, exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint, numering of poles as directed complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) Note :- Excavation incl earth work and PCC foundation will be measured and paid separately.

M& L for MS fabrication work made out of structural steel sections as in frame work including MS angles/flats/plain sheets of appropriate guage, cut to size and made to appropriate shape suitable for transformer shead/gates/ base frame of eqpt/frame work of substn including nut bolts and washers in any size, welding bracing work and bending cold or hot drilling holes for bolts in any shape or size as required including one coat of primer and two coats of synthetic enamel paint to the entire steel surface including taking down of the existing for modifying as per requirment at site all are as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius built in CM (1:4) as in foundation of equipment,supporting piller for cable/pipe, platform, ramp, cable duct, protecting wall incl demolistion of existing brick work built in cement mortar complete all as specified and directed.

M& L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation filling & mass concrete incl demolition complete all as specified.

M&L for 15 mm thick rendering in cement plaster 1:4 on fair faces of brick work or concrete surface/ in cable duct complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600X600X6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.50 mtr below the ground level connected to galvanised iron strip of 32x6 mm as earth lead by means of bolts nuts check nuts & washers of galvanised iron or steel ,surrounded by charcoal of coke and salt, protected by GI pipe 40 mm bore (light grade), water pipe 20mm bore GI medium grade with funnel and wire mesh,and making chamber of PCC (1:4:8) type D-2 using 40 mm graded stone aggregate and coping shall be in PCC(1:3:6) type C-1 using 20 mm graded stone aggregate, 50 mm thick cover of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate, reinforced with 8 mm dia TMT bars @ 80 mm c/c boath ways including excavation and earth work and removal of surplus soil to distance n exc 50 m complete all shown in electrical plate No 3 of SSR part- 2010 and also including making test point for testing of earthing made out of gun metal or phosphorous bronge size 75x75x25 mm complete all as specified and directed. (i) The cost of GI earth lead & G I pipe of 7.50 mtr length for protection of GI wire and excavation work for pit shall deemed to be included in this item. Note:- Earthing test will be carried out and if desired result not achieved and the earthing will be redone to achieve desired result without any extra payment. Make of Earth Electrode : M/s Kapilansh/Ashlok/JMV

M&L for earthing complete with galvanised steel earth plate electrode of size 600X600X6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.50 mtr below the ground level connected to galvanised earth lead wire 4.00 mm dia as earth lead by means of bolts nuts check nuts & washers of galvanised iron or steel ,surrounded by charcoal of coke and salt, protected by GI pipe 40 mm bore (light grade), water pipe 20mm bore GI medium grade with funnel and wire mesh,and making chamber of PCC (1:4:8) type D-2 using 40 mm graded stone aggregate and coping shall be in PCC(1:3:6) type C-1 using 20 mm graded stone aggregate, 50 mm thick cover of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate, reinforced with 8 mm dia TMT bars @ 80 mm c/c boath ways including excavation and earth work and removal of surplus soil to distance n exc 50 m complete all shown in electrical plate No 3 of SSR part- 2010 and also including making test point for testing of earthing made out of gun metal or phosphorous bronge size 75x75x25 mm complete all as specified and directed. (i) The cost of GI earth lead & G I pipe of 7.50 mtr length for protection of GI wire and excavation work for pit shall deemed to be included in this item. Note:- Earthing test will be carried out and if desired result not achieved and the earthing will be redone to achieve desired result without any extra payment. Make of Earth Electrode : M/s Kapilansh/Ashlok/JMV

M&L for cable path indicator made out of MS sheet complete duly embossed LT cable MS sheet of 6 mm thick and 10 cm dia duly fixed by means of nut bolts washer on angle iron frame of size 25x25x3mm length 75 cm long size fixed on and including PCC1:2:4 block of size 150 x 150 x 300 mm depth 45 cm above ground level and 30 cm below ground level duly painted two coats of red oxide and two coats of enamelled paint complete all as specified and directed. Note - cost of earth work for installation of path indicator included in the quoted rate.

M&L for aluminium conductor, steel reinforced (ACSR) of any size/description on HT/LT poles/lines including stringing, tightening, binding to insulators with aluminium wire making and connecting jumpers, connections etc including connecting, commissioning and testing incl taking down complete all as specified & directed. Note- Old spacers obtained from taking down of ACSR conductor shall be reused and fixed as directed. Make : ALL IND/ICC/KONARK( M/S POWER CABLE INDIA /UJALA/ INDIAN ALUMINIUM CO

S & F cross arms, bracing, supports clamps and back plates fabricated from structural steel sections incl nuts & bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as directed and inclusive of one red oxide primer coat, one under coat and one finishing coat of synthetic enamel paint incl taking down existing complete all as specified and directed.

S & F incl stringing GI continuous GI earth wire of size 4 mm / 3.15 mm dia on HT/LT poles as in cradle guards / earth wires, binding including taking down complete all as specified & directed.

S&F danger notice plate of 1.6 mm thick mild steel sheet vitreous enamaled white, with letters, figures and conventional skull and bones in post office red colour duly painted and written with enamelled paint fixed with and including MS clamps, bolts and nuts of approved size for LT, 20x15 cm size complete all as specified and directed.

S & F in replacement of pin type porcelain, vitreous, white, brown or green insulators, including one galvanized mild steel spindle two galvanised iron washers and one galvanised iron nut,1100 volt grade 100 mm height and 65 mm dia suitable for working pressure incl taking dwon complete all as specified and directed .Make : BHEL/JAYSHREE/AREVA/ABB/PACTIL/SOUTHERN INSULATOR/MADRASS PLCELAIN

S & F in replacement of shackle type 75 mm height and 90 mm dia insulator, porcelain, vitreous, white, brown or green incl galvanised mild steel strap 31 mm X 3 mm, insulator bolts 12 mm dia with suitable washers and nut, suitable for working pressure upto 1100 volt & including taking down complete all as specified and directed. Make : BHEL/JAYSHREE/AREVA/ABB/PACTIL/SOUTHERN INSULATOR/MADRASS PLCELAIN

M&L for stay assembly of MS galvanised stay plate 230mm X 230mm X 6mm thick MS galvanised tay rod 20 mm dia with nut 100 cm long MS galvanised stay bow 40 cm long and 14 mm dia with 2 Nos galvanised thimble with and incl all fittings all as specified in SSR 2009 Part I icomplete all as specified and directed. Note - Excation, earth work, PCC foundation etc, loop type insulator shall be measured and paid separately.

M&L for galvanised stay strand 7/ 4 mm complete all as specified and directed.

M & L for loop type insulator large size with overall demensions 140 mm clearance of hole 25.5 mm complete all as specified and as directed.

M&L for replacement of existing street light with new generation energy saving and environmental friendly long life LED street light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 powerr consumption 120 watt having minimum luminous 100/watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) including multistranded twisted copper cable of 1.5 Sqmm dia for connecting street light to junction boxes through pvc coated copper connectors and the rate includes taking down of existing unserviceable street light from poles etc complete all as specified and directed. Make :- Havells cat part LHETASU7PA6J120(Endura Omni 120W) or equivalent in Philips/Bajaj/ Crompton /Wipro

M&L for anti-climbing device, spikes type fabricated out of MS bars (round, square and flat) including nuts, bolts, washers and welded in two halves made to shape to suit the cross section of the LT poles any type all as specified & directed by Engr in Charge.

M&L for replacement of double pole Kit kat type rewireable switch fuse unit of 230 Volt 50 Hz single phase of capacity 16 Amp including MS box with backelite fuse & fuse carrier fittings, operating insulated handle, top cover necessary locking arrangemnts etc as per IS/IEC 60947 1&3 including necessary wall mounting fitting and taking out existing as directed Make : Havells Cat part No. IHBRSE 2016 or equivalent in equivalent in L&T/Indo Asian

M&L for replacement of double pole Kit kat type rewireable switch fuse unit of 230 Volt 50 Hz single phase of capacity 32 Amp including MS box with backelite fuse & fuse carrier fittings, operating insulated handle, top cover necessary locking arrangemnts etc as per IS/IEC 60947 1&3 including necessary wall mounting fitting and taking out existing as directed. Make : Havells Cat part No. IHBRSE 2032 or equivalent in L&T/Indo Asian

M&L for replacement of TPN Kit kat type rewireable switch fuse unit of 415 Volt 50 Hz three phase of capacity 32 Amp including MS box with backelite fuse & fuse carrier fittings , operating insulated handle, top cover necessary locking arrangemnts etc as per IS/IEC 60947 1&3 including necessary wall mounting fitting as directed including taking out existing . Make: Havells Cat part No. IHSBTE40 32 or equivalent in L&T/Indo Asian

M&L for replacement of TPN Kit kat type rewireable switch fuse unit of 415 Volt 50 Hz three phase of capacity 63 Amp including MS box with backelite fuse & fuse carrier fittings with double break fuse switches , operating insulated handle, top cover necessary locking arrangemnts etc including necessary wall mounting fitting as directed and including taking down the existing all as specified and directed . Make : Havells Cat part No. IHBRTE4063 or equivalent in L&T/Indo Asian

M&L for replacement of TPN Kit kat type rewireable switch fuse unit of 415 Volt 50 Hz three phase of capacity 100 Amp including MS box with backelite fuse & fuse carrier fittings , operating insulated handle, top cover necessary locking arrangemnts etc including necessary wall mounting fitting as directed and including taking down the existing all as specified and directed . Make : Havells Cat part No. IHFNTW4100 or equivalent in equivalent in L&T/Indo Asian

M&L for replacement of TPN Kit kat type rewireable switch fuse unit of 415 Volt 50 Hz three phase of capacity 200 Amp including MS box with backelite fuse & fuse carrier fittings , operating insulated handle, top cover necessary locking arrangemnts etc including necessary wall mounting fitting as directed and including taking down the existing all as specified and directed. Make : Havells Cat part No. IHFNTW4200 or equivalent in L&T/Indo Asian

S & F in replacement of change over switch with advanced neutral, ON LOAD, 63 Amps, 4 pole, AC 415 Volt, manual Change Over in sheet metal enclosure with operating side handle conforming to IS:60947 (Part-1&3) with all fixing arrangement on walls/angular frame including taking down of existing complete all as specified and directed. Make : Havells cat part No IHCFFE0063 or equiavlent in L&T/Indo Asian

S & F in replacement of change over switch with advanced neutral, ON LOAD, 100 Amps, 4 pole, AC 415 Volt, manual Change Over in sheet metal enclosure with operating side handle conforming to IS:60947 (Part-1&3) with all fixing arrangement on walls/angular frame including taking down of existing complete all as specified and directed. Make : Havells cat part No IHCFFE00100 or equivalent in L&T/Indo Asian

S & F in replacement of change over switch with advanced neutral, ON LOAD, 200 Amps, 4 pole, AC 415 Volt, manual Change Over in sheet metal enclosure with operating side handle conforming to IS:60947 (Part-1&3) with all fixing arrangement on walls/angular frame including taking down of existing complete all as specified and directed.Make : Havells cat part No IHCFFE00200 equivalent in L&T/Indo Asian

S & F in replacement of change over switch with advanced neutral, ON LOAD, 315 Amps, 4 pole, AC 415 Volt, manual Change Over in sheet metal enclosure with operating side handle conforming to IS:60947 (Part-1&3) with all fixing arrangement on walls/angular frame including taking down of existing complete all as specified and directed. Make : Havells cat part No IHCFFE00315 equivalent in L&T/Indo Asian

S&F for replacement & testing commissioning of outdoor type bus bar panel weather proof MS cubical panel board outdoor type of size 80 cm x 80 cm x 40 cm, 4 Nos of bus bar of 200 Amp capacity including one coat of redoxide and two coat of enamel paint powder coated, mounted on channels and PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels aluminium busbar chanel insulated with colour coated heat shrinkable sleaves and mounted on DMC/Epoxy insulator all as specified & directed.

Restretching of existing ACSR’s conductors and earth wires including cradles, of any description, size & shape and in any position, as in overhead lines any type, on existing poles, including opening of connections and binding wires, restringing and tightening of conductors/earth wire in position, removing sag, binding to insulators with new aluminum wire, making and connecting jumper connections etc incl commissioning and testing complete all as specified and directed. The quoted rates shall be deemed to include the following provisions also :- (i) Setting/adjusting etc in position of cradles. (ii) Adjusting & tightening of stay assembly wherever required. (iii) Trimming/cutting of all trees branches upto 1M distance from nearest conductor/earth wire as directed at site.(iv) Adjusting & tightening of cross arm,bracing,clamps, nut bolt wherever required (v) Old spacers of ACSR conductor shall be reused and fixed as directed .

M&L for Reinforced cement concrete (normal mix) type B0 1:2:4 (12.5 mm graded aggregate) for duct slab for cover of ducting, RCC slabs including demolition of old unserviceable all as directed.

M&L for reinforcement 8 mm and over using TMT bars cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete all as specified and directed.

M/S Kharya Associates

M/S AUTOMATION AND SWITCHGEAR CONTROL

M/s Hansraj Shivhare