8155 REPAIRS TO FLOORING WALLS PLASTERING CELLING ETC IN CERTAIN BLDGS IN AREA OF ASI 41 ADSR 13 FD SUB GP HQ 3 SIG GP 25 ADU AFSMC TA BN HQ AND STY DEPOT UNDER GE CENTRAL PUNE

Amount

Demolition of brick work or stone/ boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles including removing from site complete all as directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc including removing of debrish from site complete all as directed.

Demolition of cement concrete in ground floors & paving n exc 15cm thickness (below or above ground level) and removing of debrish fro msite complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including removing rubbish off the premises all as directed.

Taking up or down steel tubing 15 mm bore & connections and removing from site complete all as directed.

All as per item No 5 here-in-before but 20mm bore.

Taking down wooden door shutter resecuring, easing and adjusting and refixing in the same opening.exc 1.00 but nexc 2.00 sqm each complete all as directed.

All as per item No 7 here-in-before but n exc 1.0 sqm each opening.

Taking down shutters of any description exc 1 sqm but n.exc. 2 Sqm each and removing from site complete all as directed.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq. m but n. exc.4sq m each and removing from site complete all as specified and directed.

All as per item No 10 here-in-before but n exc 1.5 sqm each.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete and removing from site all as directed.

Dismantling of AC sheet corrugated, or semi corrugated in roof covering and removing from site complete all as directed.

Dismantling of plain or corrugated, steel sheeting, any gauge, thickness and removing from site complete all as directed.

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar and removing from site complete all as directed.

Dismantling water tanks of capacity exc 250 but n.exc 500 ltr and removing from site complete all as directed.

All as per item No 16 here-in-before capacity exc 500 but n.exc 1000 ltr

M&L for precast cement concrete solid block masonry exc 10 cm width with solid blocks PCC (1:5:8) grade C-5 and setting in CM (1:6) complete all as specified and directed.

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match, supplied and fitted to chowkats complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters, devided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as directed.

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specfied and directed.

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised complete all as specfied and directed.

S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and directed.

S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm complete all as specfied and directed.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repairs aluminium anodised barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

S & F in repairs aluminium alluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specfied and directed.

S & F in repairs extruded alluminium alloy handles fabricated type anodised size 150 mm complete all as specfied and directed.

S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specfied and directed.

S&F in repairs aluminium powder coated fancy type curtain rod 25mm bore complete all as specfied and directed.

S & F in repairs aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete, as specified,size of frame 125 x 60 mm including PCC (1:3:6) type CO using 12.5 mm graded stone aggregate as in filling of pressed steel frames complete all as specified and directed.

S&F mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete complete all as specfied and directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M & L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and directed.

All as per item No 42 here-in-before but fixing only.

M & L for asbestos cement two piece adjustable ridge 6mm thick fixed with L or J bolts with washer etc. complete all as specfied and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded aggregate) as in sub base/flooring complete; all as specified and directed.

M&L for coloured glazed Ceramics tiles 300x200x7to8mm thick in vertical surfaces such as skirting/ dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

All as per item No 47 here-in-before but area of each tile exc 0.11 sqm and n exc 0.18 sqm.

All as per item 48 here-in-before but in skirting and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:3) including triangular filleting in CM 1:4 on top of tiles complete all as specfied and directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in CM (1:6) complete all as specfied and directed.

M & L granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 complete all as specfied and directed.

M & L chamfer, splays or arris in facework to granite exc 15 mm but n exc 50 mm wide complete all as specfied and directed.

M&L for Rendering 10mm thick in cement mortar 1:6 on brick/concrete surfaces finished even & smooth with out using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in CM (1:4) with fair faces using water proofing compound as per manufacturers instructions surface finished with sponge finish. (Note : WPC shall be measured and paid separately)

Supply only integral water proofing compound.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed.

M & L for Preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directed.

M&L for preparation of new in plastered surface and applying three coats of white washing on walls complete all as spd and directed.

M & L for preparation of new or priviously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces complete all as specified and directed.

All as per item No 59 here-in-before but on steel surfaces and over a coat of red oxied primer.

S & F GI tubing medium grade 15 mm bore with all fittings & fixed complete to walls / ceiling or laid in floors complete all as specified & directed.

Refixing 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.

S & F GI tubing medium grade 20 mm bore with all fittings & fixed complete to walls / ceiling or laid in floors complete all as specified all as directed.

Refixing 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specfied and directed.

S & F in repairs vitreous china wash down water closet pan ( pedestal pattern ), white including connection to drain ( or outgoing pipe ) and to flushing pipe with and including S & F plastic water closet, seat white closed pattern with flat bottom, cover and mild steel hinging device complete all as specfied and directed.

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing waste pipe etc. complete.

S & F in repair vitreous china Urinal half stall type white excluding flushing cistern with grating and union for discharge pipe etc complete all as specfied and directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia complete all as specified and directed.

S & F in repairs stainless steel sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortor or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm X 330mm X 160 mm complete all as specfied and directed.

S&F in repairs stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 36"x36"x8" and of approved quality of finish all as spd and directed.

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specfied and directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specfied and directed.

S & F in repairs 15 mm bore stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specfied and directed.

S & F in repairs 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, complete all as specfied and directed.

S & F in repairs 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts,screwed for iron pipe complete all as specfied and directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specfied and directed.

S & F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe Co.

Taking down old hanging/loose WHB and refixing the same in the same position with fasteners inclduing new waste pipe, CP brass coupling etc all as spd and directed.

S & F in repairs flush pipe of polyethylene of low or high density or PVC , 32 mm dia for low level flushing cistern/ basins complete all as specfied and directed.

S&F in repairs PVC waste pipe for WHB, urinals & sink flexible type of suitable dia in repairs.

S & F in repairs gratings 100 mm dia of stainless steel complete all as specfied and directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specfied and directed.

S & F in repairs 125 mm dia swivel type brass chromium plated shower rose of approved quality complete all as specfied and directed.

S & F in repair health faucet including 1.0 meter long flexible cord complete all as specfied and directed.

S & F in repairs plastic water closet seat cover white closed pattern with flat bottom and mild steel chromium plated or aluminium hinges complete all as specfied and directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specfied and directed.

S&F 500 ltrs capacity rotational moulded polythylene water storage tanks of double layers ISI marked including 20 mm bore PTMT ball valve with aluminium rod and high density plastic ball (cylindrical vertical with colsed top) hoisted and fixed in postion all as spd and directed.

All as per item No 89 here-in-before but capacity exc 500 but n.exc 1000 ltr

Hacking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with beads, each pane n. exc 0.5 Sqm in area complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for frosted glass 3mm thick ordinary quality and glazing with oil putty or fixed with beads, each pane n. exc 0.5 Sqm in area complete all as specified and directed.

Suma Construction

M/S Abhishek Builders

VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD

ANIL CONSTRUCTION CO.