Installation of earthing arrangement for 500KVA Transformer, 6.6kV/440V with GOAB isolator and lightening arrestor at Excavation workshop under KDH OCP, NK Area

Amount

Providing and fixing of GOAB Switch, 11kV, 800A

Providing of Horn gape Fuse Unit

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. 120 sq. mm

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtrs long etc etc. with charcoal and salt as required.

Providing and fixing of 16Sqmm ISI marked, FRLS PVC insulated single core copper conductor cable.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required. Above 11.00 Metre and upto 13.00 Metre.

Supplying and erection of stay set complete (galvanized) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Erection of all aluminum conductor of 7/1.96 mm to 7/3.10 mm diameter and above including binding etc as required.

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanized insulator fittings, ball and socket type and complete with galvanized strain clamps, bolts, nuts, washers etc. as required. 90KN

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11 KV overhead line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm MS flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts and nuts etc and painting with primer and finish paint as required.

Dismantling of pole / street light standard / strut embedded in cement concrete foundation etc as required.

Dismantling of over head lines comprising of copper / aluminium over head conductor, G.I. wire, cross arms, insulators etc as required

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 6.6 KV overhead lines with rated voltage 6 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanized clamping arrangement, G.I. bolts, nuts, washers etc as required.

Total impact of GST for the purpose of CTC

M/S PRAVEEN KUMAR

M/S R K Enterprises