Maintenance and Repairing to High School Building at Galonda, Randha, Naroli and Kharadpada.

Amount

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Providing wood work in frames of Doors, windows cleare story windows and othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood (upto 10 ton)

Providing and fixing FRP of 28mm thick Fibre Glass shutter with 1.5 to 2.0 mm thick fire retardent grade FRP skin in depressed panel design having extra reinforcement on sides & edges & in Gel coat finish. The core of the shutter is to be filled up with injected retardent grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof ,weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws & alluminium S.S fixtures & fastenings & fastener sleeve.

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm including foot rest and trap (A) Vitreous China.(I) Long pattern = White colour

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same including fittings (CP Brass Waster Coupling 32 mm dia, Pillar cock 15 mm dia heavy duty swan neck, PVC Inlet pipe and Waste pipe 32 mm dia and Angle cock 15 mm dia heavy duty. (A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing screw down bib taps of following size (B) brass Chromium plated scres down Bibi Tap 15 mm dia.

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.

Providing and fixing brass screw down stop tap.(A) 15mm dia.

Providing and fixing 35 mm thick shutters for Doors, windows and clearstory windows including blackenamelled M.S. butt hinges with necessary screws. (A) Indian teak wood. (i) Fully Panelled. (upto 10 ton)

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry.

Providing & fixing sheet glass for using ground glass ( Frosted or obscured on one side) bidding in M.S. Window front & back puttied and sprigsed of fixed with glazing pins & necessary cutting of glass 4mm thick.

Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan

Suply and fixing for Semi Rigid PVC waste pipe for sink and wash 32mm dia with length not less than 700mm i/c PVC waste fittings.

Providing and fixing to wall ceiling and floor 6.0 Kg F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge comression type fittings, wall clips etc. including making good the wall ceiling and floor (G) 110mm.

Providing and fixing double polished machine cut (16 to 18mm) Granite Partition for Urinal partition, including making gissi in brick wall and filling gap with cement slurry and cement mortar etc complete in true line and level as directed by EIC.

Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime /cement concrete.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Providing material and labour for filling in plinth WITH UNSCREEN GRAVEL under floors including watering, ramming consolidating and dressing etc. complete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional. Extra for brick work in superstructure above plinth level upto floor two level (B) Conventional

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supply & Installation Softboard paneling made of fabric of high quality & foam, which is washable, scratch resistance and fire retardant properties on 6mm thk. ply/softboard backing. Aluminium trim to be installed all arounf the softbaord paneling as per design & detail and as directed by Engineer-in-charge. (ALTOP OR EQUIVALENT)

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Cupboards : Providing and supplying Glass Door Storwel having an overall size of 900mm(W)x475mm(D)x1850mm(H) with welded construction. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt . It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 900mm x475mm x 1850mm

Cupboard : Providing and supplying Solid Door Cupboard. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The steel shutter shall have a brass handle and a 2 way locking mechanism with shooting bolt . It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 900mm x 475mm x 1850mm

Teachers Table : Providing and supplying Godrej Enzo with size of 1350x750x750. Prelaminated particle board with 18mm thick table top and 15mm thick understructure covered with pvc lipping. Locking facility available for top drawers. Attractive balck color handles for all drawers. Tables are available in beech color only.Approved Make Godrej/Herman Miller/Hayworth/Knoll. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.)Size : ENZO 1350mm x 750mm x 750mm

Chairs: Providing and supplying Chairs with motion cushioned seat assembly which consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. The seat and back should be firmly connected to the base frame and should be cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat should offer impact cushioning while sitting and synchronise with the back movement during posture changes.The variable tilt angle recline motion should be adjusted with 3 position Tilt Limit feature and the tension (return force)should be user weight dependent. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide.The seating height should be adjusted with a pneumatic gas-lift. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.)

Providing and fixing ornamental grill gate with fixing decorative C.I. design of required pattern with fixing M.S. square bar, Flats,plate, angle as required including fixture & fasterning as per approved design & directed by Engineer in charge.

Providing and erecting Decorative Box type with plastic /Polyester covere fluorescent fitting with Electronic Ballast, finished with anti - rust treaded white stove enamelled with end plates and holders with erection on site with lead wire and connections with 1 tube 40 watt. 120 cms and adapter if required.

Providing and erected Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 c/s 1200 mm sweep complete, canopy and 30cms. Down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing. [ Make shall be approved by Engineer in charge ]

Providing material labour for fixing simless pipe 1/2" for HP Gas line as directed by Engineer in charge

Providing material labour for fixing Barnals (Diya) & Brass

Supply & fixing Laboratory Valve as directed by Engineer in charge.

Supply & fixing M.C Valve (Big size) as directed by Engineer in charge.

Supply & fixing M.C Valve (Small size) as directed by Engineer in charge.

Supply & fixing Surecksha pipe (2 feet with nuts) as directed by Engineer in charge.

Supply & fixing Surecksha pipe 2 feet long as directed by Engineer in charge.

Supply & fixing Nipples as directed by Engineer In charge.

Supply & fixing Regulator (Adoptor) as per directed by Engineer in charge

Supply & fixing Surecksha pipe (5 feet) long as directed by Engineer in charge.

Providing & supplying 250 LPH RO Plants (Make: LCM Industrial, Aqua RO, Bio Cool, High tech). As per Specification as under:- 1 RAW water pump-LUBI/CRI/WILO 2 Vessel 1284, 3 Multiport Valve 25NB 1", 4 20" Big blue Jumbo housing, 5 20" 4.5" PP fliter, 6 Sand Media, 7 HI Pressure switch , Carbon media, High Pressure Pump -LUBI/CRI/WILO,Pressure tube 40-40-FRP/SS, 40-40 Membrane, ROTA Meter 50-500 LPH,RO Controller with TDS,Solenoid Valve - Brass.

Providing and erecting approved make split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control) (B) for 2 ton capacity

Repairing of stainless steel railing of staircase of all three floors of the building including welding, anchoring, fixing with S.S. Solution using the Serviceable materials stacked at school campus and providing materials & labour charges for required fittings like elbow, base consile, wall consile etc. (S.S. 304) and including buffing charges to the railing etc. complete.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM {A} 305 mm dia 900RPM

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime concrete/cement concrete

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter .(600 mm over all girth)

Providing and laying PLINTH PROTECTION including excavation of 30cm. Depth and filling with Brick Bats Chhara of 20cm. Thick and C.C. 1:2:4 ( 1 cement :2 coarse and :4 graded stone aggregate 20mm nominal size) of 10cm. Thick and top layers of 12mm thick cement plaster in C.M. 1:3 and finishing with floating coat of neat cement slurry.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick (upto 10 ton)

Providing and laying chequered precast cement concrete tiles 22mm thick with aggegate of sizes upto 6mm in floors, treads of steps and landings on 20mm thick bed of C.M. 1:6 (1-cement : 6-sand) or L.M. 1:1.5(1-Lime putty : 1.5 coarse sand) joint with neat cement slurry with pigments to match the shade of the tiles. (upto 10 ton)

Providing material and labour for filling up of yellow soil suitable for play Ground upto 30 cm in depth including breaking clods, dressing with all lead & lift to the design section and height of embankment as directed by Engineer incharge..

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like (upto 10 ton)

Providing and fixing G.I. Chainlink fencing 50mm x 50mm sq.mt. of 8 gauge wire having weight @ 4.30 kg/m2 including fixing with M.S. flate 25mm x 5mm thick nut with bolts etc. complete.

Providing and laying 24" x 24" vetrified 8mm thick over 12mm thick bed of cement mortar in 1:3 (1 cement: 3 coavse sand) in skirting risers of steps and dedo by adhesive material including dismentalling of existing surface and jointed with colour cement slurry including finished with flush painting & cleaning the surface etc complete for light/Dark shade as directed, Engineer in charge. Make: Kajaria/Somany/Asian/Johnsons.

P & L 24" x 24" matt finish vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade Make: Kajaria/Somany/Asian/Johnsons.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

Providing material and labour for fixing Powder coated Alluminium DOOR with pipe section 63.50mm x 38.10mm x 1.95 mm including glazing clips and 25mm x 25mm x 1.80 mm having cross section C/C not more than 0.7 x 1.00 meter and using Hardnersheet / Modi Glass 4mm thick fitting with rubber gasket and other fixture and fastening and Door closer etc. complete as directed by Engineer in charge.

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire including roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing complete. (A) 50mm thick

Providing and fixing Stainless Steel A ISI 304 18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, ncluding painting of fittings and brackets, utting and making good the walls wherever required : 470x420 mm bowl depth 178 mm

Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm.

Providing material and labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Kuvarji B Parmar

vishal panchal