Improvements to Kagawada-Kaladagi road from KM 22.40 to 26.00 in Raibag Taluk of Belagavi District Under CM FUND for the year 2025-26

Name of Work : Improvements to Kagawada-Kaladagi road from KM 22.40 to 26.00 in Raibag Taluk of Belagavi District Under CM FUND for the year 2025-26 WORK INDENT NO : )

Sl no Items Unit Milestone -1 Quantity Milestone -2 Quantity Milestone -3 Quantity Total Quantity Rate in Rs. Amount for Mile Stone 1 in Rs Amount for Mile Stone 2 in Rs Amount for Mile Stone 3 in Rs Total Amount in Rs 30% 30% 40%

1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth (P No-8 / 1.12,Vol 1) m3 1414.740 1414.740 99.75 0.00 0.00 141120.32 Rs. 141,120.32 30% 30% 40%

2 Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be recovered @ Rs. 60.00/m3) (P No-7/ 1.7,Vol 1) m3 1131.792 1131.792 124.95 0.00 0.00 141417.41 Rs. 141,417.41 30% 30% 40%

3 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. (Royalty shall be recovered @ Rs. 60.00/m3) (P No-7/ 1.8,Vol 1) m3 557.283 557.283 497.70 0.00 0.00 277359.75 Rs. 277,359.75 30% 30% 40%

4 Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts &leads, transporting to site, spreading, grading to required slopeand compacted to meet requirement of table No. 300-2 (P No-17/ 3.6,Vol 3) m3 646.920 646.920 517.65 0.00 0.00 334878.14 Rs. 334,878.14 30% 30% 40%

5 Granular Sub-Base-By Mix in Place Method Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401-For Grading -V Material (P No-23 / 4.2 B (V),Vol 3) m3 310.950 310.950 2476.95 0.00 0.00 770207.60 Rs. 770,207.60 30% 30% 40%

6 Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(P No-26 / 4.17,Vol 3) m3 225.000 225.000 2686.95 0.00 0.00 604563.75 Rs. 604,563.75 30% 30% 40%

7 Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means..(P No-31 / 5.1 A (i),Vol 3) m2 900.000 900.000 48.30 0.00 0.00 43470.00 Rs. 43,470.00 30% 30% 40%

8 Tack coat on Granular surface treated with primer Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg/m2 on Granular Surface.(P No-43 / 5.33,Vol 3) m2 450.000 450.000 15.75 0.00 0.00 7087.50 Rs. 7,087.50 30% 30% 40%

9 Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom(P No-31 / 5.3 503(i),Vol 3) m2 2100.000 2100.000 13.65 0.00 0.00 28665.00 Rs. 28,665.00 30% 30% 40%

10 Dense Graded Bituminous Macadam Grading - II for traffic >20 MSA Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with btuminous binder VG-40, @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory andtandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.(P No-36/5.13 C Vol-3) m3 45.000 45.000 10928.40 0.00 0.00 491778.00 Rs. 491,778.00 30% 30% 40%

11 Bituminous Concrete Grading II for traffic >20 MSA Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-40, @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. (P No-38/5.17 C Vol-3) m3 90.000 90.000 12736.50 0.00 0.00 1146285.00 Rs. 1,146,285.00 30% 30% 40%

12 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(P No-67 / 8.15,Vol 3) m2 69.999 69.999 556.50 0.00 0.00 38954.44 Rs. 38,954.44 30% 30% 40%

13 Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. (P No-74/ 8.43,Vol 3) Nos 50.000 50.000 383.25 0.00 0.00 19162.50 Rs. 19,162.50 30% 30% 40%

14 Direction and Place Identification Signs more than 0.9 m2 Size Board. providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area exceeding 0.9 m2 fixed over back support frame of min 40 x 40 x 5mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing (P No-65/ 8.8,Vol 3) m2 2.160 2.160 10168.20 0.00 0.00 21963.31 Rs. 21,963.31 30% 30% 40%

15 Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. 60 cm equilateral triangle (P No-64/ 8.5 A(iv),Vol 3) Each 2.000 2.000 3740.10 0.00 0.00 7480.20 Rs. 7,480.20 4074392.92 30% 30% 40%

providing Decorative street Light poles on the both side of the road -0.08 30% 30% 40%

1 Decorative light single poles Fabricating supplying and erection of 10 Mtrs long hot dip Galvanized conical pole with BSEN 10025 Grade S 355 J0 Steel plate for shaft I5 2052 for base plate with door opening arrangements including suitable boards, bakelinge sheet for MCBs as per IS specification suitable to withsand the wind speed of 47 M/sec for 10 mtr pole in single section and single joint welded as per IS 9595/IS 10178AWS having stone botton 200mm top 70mm with 3mm thick the poles should be painted ashtetically using good quality autocoat paint the side pole should be 3 mtr height 165 mm dia 3mm thick having 1 mtr performation from 1.5 mtr to 2.5 mtr height the polycarbonate pipe housed inside the performation along with changing LED visible from all sides the foundations plate should be suitable aluminium head placed at top including PC cover having 7watt LED bulb inside suitable base plate 4 Nos 24 Long J bolts along with template and the pole shall be hot dip galvanized dipping with not less than 65 micron as per ASTM A123 and 153 etc Each 94.000 26.000 120.000 48500.00 4559000.00 1261000.00 0.00 Rs. 5,820,000.00 30% 30% 40%

2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP-66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC-60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>130lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source - LED Streetlight 150 W NO 120.000 120.000 14705.00 0.00 1764600.00 0.00 Rs. 1,764,600.00 30% 30% 40%

3 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. Each 120.000 120.000 162.00 0.00 19440.00 0.00 Rs. 19,440.00 30% 30% 40%

4 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) KM 3.480 3.480 141842.00 0.00 493610.16 0.00 Rs. 493,610.16 30% 30% 40%

5 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 - 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) KM 0.400 0.400 139549.00 0.00 55819.60 0.00 Rs. 55,819.60 30% 30% 40%

6 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 - HDPE Grade PE80-PN6.0, 63mm dia ( WS - Vol - 5 Pg No - 95 ) Mtr 3480.000 3480.000 189.00 0.00 657720.00 0.00 Rs. 657,720.00 30% 30% 40%

7 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:2010 - 3C X 2.5 Sq.mm Mtr. 1440.000 1440.000 113.00 0.00 162720.00 0.00 Rs. 162,720.00 30% 30% 40%

8 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-1990, Clause 16.8 Temperature Index -IS 694-1990, Clause 16.13 Smoke Density -IS 694-1990, Clause 16.14 Test for Halogen Acid Gas evaluation -IS 694-1990, Clause 16.12 - 6 sqmm Mtr. 80.000 80.000 92.00 0.00 7360.00 0.00 Rs. 7,360.00 30% 30% 40%

9 Laying of Cable in Existing Trench/GI Pipe/Stone Ware/RCC Hume pipe Using Wooden/Aluminium Rollers as Directed by the Department Staff - LT Cable - 2.5 to 25 Sqmm KM 3.880 3.880 20886.00 0.00 81037.68 0.00 Rs. 81,037.68 30% 30% 40%

11 Aluminium End Terminal (Lug) - 25 sqmm NO 32.000 32.000 3.00 0.00 0.00 96.00 Rs. 96.00 30% 30% 40%

12 Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. ( Vol - 05 Pg no - 157 ) Job 8.000 8.000 3750.00 0.00 0.00 30000.00 Rs. 30,000.00 30% 30% 40%

14 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. 1.17.1 All kinds of soils. Depth upto 1.50 m cum 1526.000 1526.000 262.00 0.00 0.00 399812.00 Rs. 399,812.00 30% 30% 40%

15 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Cum 97.200 97.200 102.00 0.00 0.00 9914.40 Rs. 9,914.40 30% 30% 40%

16 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 9.720 9.720 5918.00 0.00 0.00 57522.96 Rs. 57,522.96 30% 30% 40%

17 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 91.800 91.800 6221.00 0.00 0.00 571087.80 Rs. 571,087.80 30% 30% 40%

18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures tone 4.800 4.800 69749.00 0.00 0.00 334795.20 Rs. 334,795.20 30% 30% 40%

19 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. - 14SWG sq.cms 166400.000 166400.000 0.50 0.00 0.00 83200.00 Rs. 83,200.00 30% 30% 40%

20 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - 50x50x6mm Mtr 40.000 40.000 395.00 0.00 0.00 15800.00 Rs. 15,800.00 30% 30% 40%

21 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 12.000 12.000 515.00 0.00 0.00 6180.00 Rs. 6,180.00 30% 30% 40%

22 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 50-63 A TPN Each 4.000 4.000 3088.00 0.00 0.00 12352.00 Rs. 12,352.00 30% 30% 40%

23 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - 6-32Amps SP Each 12.000 12.000 415.00 0.00 0.00 4980.00 Rs. 4,980.00 30% 30% 40%

24 Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. - 100Amps 4x30x6mm Aluminium Strips Mtr 6.000 6.000 2465.00 0.00 0.00 14790.00 Rs. 14,790.00 30% 30% 40%

25 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947 - 95/100 A Each 4.000 4.000 16606.00 0.00 0.00 66424.00 Rs. 66,424.00 30% 30% 40%

26 Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. Each 4.000 4.000 4843.00 0.00 0.00 19372.00 Rs. 19,372.00 30% 30% 40%

27 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. - 32Amps Each 12.000 12.000 241.00 0.00 0.00 2892.00 Rs. 2,892.00 30% 30% 40%

28 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 1526.000 1526.000 160.00 0.00 0.00 244160.00 Rs. 244,160.00 10954808.72 30% 30% 40%